Metabolic Effects of the Ingestion of Different Fructose Sources in Rats

Introduction: Fructose is a simple carbohydrate that should be ingested in a restricted manner. However, current data suggest increased daily consumption of fructose which may lead to an increased incidence of diseases such as obesity, diabetes and co-morbidities associated with excess weight. Thus, the objective of the present study was to assess the effect of the ingestion of different fructose sources on weight gain, glycemia and serum triglyceride levels in rats.Methods: The study was conducted on male Wistar rats divided into 5 groups according to the source and concentration of fructuse (ingested ad libitum in liquid form).Results: Drink intake was increased and chow consumption was reduced in all groups compared to control (p<0.05). The animals of the groups receiving 10 and 20% fructose solutions showed increased triglyceride levels and the 20% group also showed weight gain. The exaggerate consumption of fructose promotes a reduced consumption of chow, an increase in serum triglyceride levels, and weight gain in some animals.

Resting energy expenditure and carbohydrate oxidation are higher in elderly patients with COPD: a case control study

Background: Elderly patients with chronic obstructive pulmonary disease (COPD) usually have a compromised nutritional status which is an independent predictor of morbidity and mortality. To know the Resting Energy Expenditure (REE) and the substrate oxidation measurement is essential to prevent these complications. This study aimed to compare the REE, respiratory quotient (RQ) and body composition between patients with and without COPD.Methods: This case-control study assessed 20 patients with chronic obstructive pulmonary disease attending a pulmonary rehabilitation program. The group of subjects without COPD (control group) consisted of 20 elderly patients attending a university gym, patients of a private service and a public healthy care. Consumption of oxygen (O-2) and carbon dioxide (CO2) was determined by indirect calorimetry and used for calculating the resting energy expenditure and respiratory quotient. Body mass index (BMI) and waist circumference (WC) were also measured. Percentage of body fat (%BF), lean mass (kg) and muscle mass (kg) were determined by bioimpedance. The fat free mass index (FFMI) and muscle mass index (MMI) were then calculated.Results: The COPD group had lower BMI than control (p = 0.02). However, WC, % BF, FFMI and MM-I did not differ between the groups. The COPD group had greater RQ (p = 0.01), REE (p = 0.009) and carbohydrate oxidation (p = 0.002).Conclusions: Elderly patients with COPD had higher REE, RQ and carbohydrate oxidation than controls.

Amino acid availability and protein digestibility of several protein sources for Nile tilapia, Oreochromis niloticus

Apparent amino acid availability coefficients and protein digestibility of four animal products [fish meal (FM), meat and bone meal (MBM), poultry by-product and feather meal] and four plant protein-rich products [soybean meal (SBM), cottonseed meal-28, cottonseed meal-38 and corn gluten meal (CGM)] were determined for Nile tilapia, Oreochromis niloticus. Ingredients were incorporated to a practical reference diet at a 7 : 3 ratio (70% of reference diet and 30% of test ingredient). Chromic oxide was used as external digestibility marker. Among animal products poultry by-product meal (PBM; 89.7%) and FM (88.6%) presented the highest apparent protein digestibility (APD) while MBM (78.4%) and feather meal (78.5%) presented the lowest APD. Among plant protein-rich products CGM (91.4%) and SBM (92.4%) presented the highest APD values while cottonseed meal-28 presented the lowest APD (78.6%). Average apparent amino acid availability of feed ingredients was similar to protein digestibility with 92.3%, 89.6%, 73.4%, 80.7%, 88.9%, 84.4%, 91.2% and 79.7% values for SBM, CGM, cottonseed meal-28 and 38, FM, MBM, PBM and feather meal respectively. These results indicate that O. niloticus is able to utilize efficiently different feedstuffs.

Effects of dietary trace mineral sources and levels fed to layers in their second laying cycle on the quality of eggs stored at different temperatures and for different periods

This study aimed at evaluating the effects of trace mineral levels and sources supplemented to diets fed to semi-heavy layers in their second laying cycle on the quality of eggs stored for 14 days at different temperatures. The experimental diets consisted of the inclusion of inorganic trace minerals (T1 - control: 100% ITM) and five supplementation levels of organic trace minerals (carboaminophopho chelates) (110, 100, 90, 80, and 70% OTM). Trace mineral inclusion levels (mg/kg feed) were: T1: control - 100% ITM: Zn (54), Fe (54), Mn (72), Cu (10), I (0.61) Se (0.3); T2 - 110% OTM: Zn (59.4), Fe (59.4), Mn (79.2), Cu (11.88), I (1.21) Se (0.59); T3 - 100%: OTM: Zn (54), Fe (54), Mn (72), Cu (10.8), I (1.10) Se (0.54); T4 - 90% OTM: Zn (48.6), Fe (48.6), Mn (64.8), Cu (9.72), I (0.99) Se (0.49); T5 - 80% OTM: Zn (43.2), Fe (43.2), Mn (57.6), Cu (8.64), I (0.88), Se (0.43); T6 - 70% OTM: Zn (37.8), Fe (37.8), Mn (50.4), Cu (7.56), I (0.77) Se (0.38). A completely randomized experimental design in a split-plot arrangement with 60 treatments of four replicates each was applied. The combination of six diets versus storage temperature (room or under refrigeration) was randomized in plots, whereas the sub-plots consisted of storage times (0, 3, 7, 10, and 14 days). Data were submitted to analysis of variance of a model in slip-plots in time using the software package SAS (2000) at 5% probability level. It was concluded that 70% OTM supplementation can be used with no damage to egg quality, independently from storage temperature or time. The quality of refrigerated eggs stored up to 14 days is better than those stored at room temperature.

Effects of adding polyclonal antibody preparations on ruminal fermentation patterns and digestibility of cows fed different energy sources

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Concentrations of Progesterone and Insulin in Serum of Nonlactating Dairy Cows in Response to Carbohydrate Source and processing

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sources of organic trace minerals in diets for weaned piglets

One hundred and twenty six piglets from a commercial genetic strain weaned at 21 days of age (6.11±0.42 kg) were used to evaluate the effects of supplementation levels of organic sources of trace minerals in the diets of weaned piglets on performance, occurrence of diarrhea, excretion of copper and zinc in the feces, and hematological parameters. A completely randomized block design was adopted, composed of six treatments (diets containing 100% of inorganic trace minerals premix at 3.00 kg/T; diets containing 0, 25, 50, 75 or 100% of organic trace minerals premix, equivalent to 0; 0.75; 1.50; 2.25 or 3.00 kg/T, respectively), seven replicates and three animals per plot. During the experimental period (from 21 to 63 days of age), the increasing levels of organic trace minerals premix in the diets determined a quadratic effect on daily weight gain (DWG), feed conversion (FC), percentage of hematocrit (Ht), hemoglobin (Hb), mean corpuscular hemoglobin (MCH), mean corpuscular volume (MCV), platelets (Pt), and a linear increase of Cu and Zn concentrations in feces. The comparison of means between the treatment with inorganic trace minerals premix and the other treatments showed that piglets fed diets without trace minerals premix had lower values of DWG, Ht, Hb, MCH, MCV, Pt and the worst FC value of piglets fed diets containing 25% of organic trace minerals premix presented lower values of Ht and Hb, in comparison with those fed diets with 100% of inorganic trace minerals premix. Inorganic trace minerals premix can be substituted by organic trace minerals premix at a lower level of inclusion in diets for weaned piglets.

Effect of light curing sources on microhardness of different composite resins

This study evaluated the influence of light-curing units (LCUs) on Knoop microhardness (KHN) of different composite resins formulations. Four LCUs, one Quartz-Tungsten-Halogen (QTH) for 20 s, one Argon-Ion-Laser (AL) for 10 s, one Plasma-Arc-Curing (PAC) for 9 s, and one Light-Emitting-Diode (LED) for 20 s, and three composite resins, nanofill and easy cure (Filtek (TM) Supreme), microhybrid and medium cure (Herculite XRV), and microfill and difficult cure (Heliomolar) were used. Discs (4 x 2 mm(2)) of each composite resin were divided in 12 Groups and KHN was measured at the top (T) and bottom (B) surfaces. Data were analyzed using two-way ANOVA and Tukey's test (p < 0.05). Top presented significantly higher KHN than bottom surface for all composite resins and LCUs tested. Statistical significant differences were observed among the LCUs. At the bottom surface QTH and LED presented higher KHN than PAC and LA. However, at the top surface PAC and LA presented similar results than QTH for nanofill and microhybrid composite resins. Different LCUs play an important effect on Knoop microhardness and the composite resin formulations were significant factor on the photosensitivity.

The Effect of Power Bleaching Actived by Several Light Sources on Enamel Microhardness

The purpose of this study was to evaluate the influence of different light sources for in-office bleaching on surface microhardness of human enamel. One hundred and five blocks of third molars were distributed among seven groups. The facial enamel surface of each block was polished and baseline Knoop microhardness of enamel was assessed with a load of 25 g for 5 s. Subsequently, the enamel was treated with 35% hydrogen peroxide bleaching agent and photo-activated with halogen light (group A) during 38 s, LED (group B) during 360 s, and high intensity diode laser (group C) during 4 s. The groups D (38 s), E (360 s), and F (4 s) were treated with the bleaching agent without photo-activated. The control (group G) was only kept in saliva without any treatment. Microhardness was reassessed after 1 day of the bleaching treatment, and after 7 and 21 days storage in artificial saliva. The mean percentage and standard deviation of microhardness in Knoop Hardness Number were: A 97.8 +/- 13.1 KHN; B 95.5 +/- 12.7 KHN; C 84.2 +/- 13.6 KHN; D 128.6 +/- 20.5 KHN; E 133.9 +/- 14.2 KHN; F 123.9 +/- 14.2 KHN; G 129.8 +/- 18.8 KHN. Statistical analysis (p < 0.05; Tukey test) showed that microhardness percentage values were significantly lower in the groups irradiated with light when compared with the non-irradiated groups. Furthermore, the non-irradiated groups showed that saliva was able to enhance the microhardness during the measurement times. The enamel microhardness was decreased when light sources were used during the bleaching process and the artificial saliva was able to increase microhardness when no light was used.

Influence of different light sources and photo-activation methods on degree of conversion and polymerization shrinkage of a nanocomposite resin

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Rhamnolipid surfactants: An update on the general aspects of these remarkable biomolecules

Pseudomonas strains are able to biosynthesize rhamnose-containing surfactants also known as rhamnolipids. These surface-active compounds are reviewed with respect to chemical structure, properties, biosynthesis, and physiological role, focusing on their production and the use of low-cost substrates such as wastes from food industries as alternative carbon sources. The use of inexpensive raw materials such as agroindustrial wastes is an attractive strategy to reduce the production costs associated with biosurfactant production and, at same time, contribute to the reduction of environmental impact generated by the discard of residues, and the treatment costs. Carbohydrate-rich substrates generated low rhamnolipid levels, whereas oils and lipid-rich wastes have shown excellent potential as alternative carbon sources.

Comparative growth of trichoderma strains in different nutritional sources, using bioscreen c automated system

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

d(-)-Lactic Acid Production by Leuconostoc mesenteroides B512 Using Different Carbon and Nitrogen Sources

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

New sources of oilseeds from Latin American native fruits

Three Latin American oilseeds obtained from native fruits: nopal (tuna) (Opuntia ficus-indica), cherimoya (chirimoya) (Annona cherimola), and papaya, Chilean variety (Carica pubescens or C. candamarcensis) were studied for their fatty acid composition and bioactive compounds, such as tocols and phytosterols, looking for new sources of special oilseeds for this region. The results indicated that each species represents an interesting possibility. Nopal oilseed is a good source of linoleic acid (62%), with a good balance between SFA and MUFA (1: 1.3). Cherimoya oilseed presents quite a different composition, with 24% SFA, 43% MUFA and 33% PUFA. Palmitic and stearic acids (15% and 7.6%, respectively) are the main SFA. A good balance between oleic acid (42.7%) and linoleic acid (31%) was observed. Papaya oilseed is a highly MUFA oil (72% with 71% oleic acid), with a very interesting composition, according to the new nutritional and technological recommendations.With respect to bioactive compounds, the main tocol in these three oilseeds was gamma-tocopherol, with 136, 300 and 317 mg/kg for cherimoya, papaya and nopal oilseeds, respectively. According to the total tocol content, papaya oilseed presented the highest value with 384 mg/kg. The total amount and distribution of phytosterols was different, with values of 3092, 3554 and 5474 mg/kg for nopal, cherimoya and papaya oilseeds, respectively, with beta-sitosterol forming 47.6%, 65.0 % and 78.7% of the total phytosterol fractions, respectively. From the results obtained, Chilean papaya oilseed can be considered as a very promising new source of special plant oil for different applications, followed by cherimoya and nopal oilseeds.

Three exopolysaccharides of the beta-(1 -> 6)-D-glucan type and a beta-(1 -> 3;1 -> 6)-D-glucan produced by strains of Botryosphaeria rhodina isolated from rotting tropical fruit

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)