Nova versão do sistema de avaliação de terras - SIAT

O SIAT é um sistema especialista para Avaliação de Terras derivado do MicroLEIS - Land Evaluation Information System desenvolvido na Espanha. Na primeira versão, as 12 variáveis foram adaptadas e ajustadas para condições tropicais, assim como a estrutura do programa e o banco de dados. Os testes de campo mostraram que os melhores resultados foram obtidos para escalas próximas de 1:100.000. Nesta segunda versão, os intervalos das variáveis foram redefinidos e uma interface de comunicação com o SIG IDRISI foi introduzida, permitindo a troca de dados entre os dois programas. Outra modificação importante foi a adoção de uma equação para calcular a erosividade no lugar de mapa apresentado no Manual do Usuário. Os testes de campo mostraram que o uso do SIAT é agora mais funcional, com melhor resolução, permitindo trabalhar com escalas em torno de 1:50.000, além de ser adaptável para todo o território brasileiro. A versão do SIAT pode ser obtida pelo endereço www.rc.unesp.br/igce/ceapla/biblioteca/softwares/siat.html.

Erbium-activated silica-zirconia planar waveguides prepared by sol-gel route

Er(3+) doped (100-x)SiO(2)-xZrO(2) planar waveguides were prepared by the sol-gel route, with x ranging from 10 up to 30 mol%. Multilayer films doped with 0.3 mol% Er(3+) ions were deposited on fused quartz substrates by the dip-coating technique. The thickness and refractive index were measured by m-line spectroscopy at different wavelengths. The fabrication protocol was optimized in order to confine one propagating mode at 1.5 mu m. Photoluminescence in the near and visible region indicated a crystalline local environment for the Er(3+) ion. (c) 2007 Elsevier B.V. All rights reserved.

Bioacoustic analysis of advertisement call in Hyla nana and Hyla sanborni (Anura, Hylidae) in Botucatu, São Paulo, Brazil

As características relacionadas à comunicação sonora em duas espécies aparentadas, Hyla nana e H. sanborni, pertencentes ao grupo nana de espécies, foram estudadas, entre agosto de 1997 e junho de 1999, em duas poças permanentes de grande porte em área aberta na região de Botucatu, Estado de São Paulo. Foram obtidas gravações de 131 exemplares, 71 indivíduos de H. nana e 58 de H. sanborni, durante início de atividade de vocalização e atividade de vocalização em coro. Houve diferença nos ritmos de emissão de notas dos cantos entre o início das atividades e durante os coros. O canto de anúncio das espécies consiste na emissão de séries consecutivas de notas simples, pulsadas, com taxa de repetição rápida. Hyla nana e H. sanborni apresentam dois tipos de notas em seu canto de anúncio, denominados aqui como tipos A e B. Notas do tipo A, introdutórias, apresentam maior duração e número de pulsos, e suas emissões foram mais freqüentes durante o início das atividades de vocalização. As notas introdutórias são as primeiras da série emitida em atividade de coro. As notas do tipo B, secundárias, são curtas e com menor número de pulsos, sendo emitidas durante as vocalizações em coro. Os dois tipos de notas encontrados diferem significativamente em sua estrutura temporal. As duas espécies apresentaram segregação acústica tanto na estrutura espectral como na temporal de seus cantos de anúncio.

Características químicas de substratos utilizados na produção de mudas de cacaueiros

O objetivo deste trabalho foi realizar monitoramento químico de seis substratos utilizados na produção de mudas de cacaueiros. Os substratos receberam 10 volumes (100mL, cada) de água destilada, e no lixiviado coletado foram determinados o pH, a condutividade elétrica (CE) e os teores de sódio (Na) e potássio (K) em solução. Os valores de pH variaram de 5,0 a 8,0 em Plantmax® e composto do tegumento da amêndoa do cacau (CTAC), respectivamente. Verificou-se que, a partir do primeiro volume lixiviado, a CE de todos os substratos foi reduzida. Foram encontradas correlações positivas para a CE em relação ao K e Na da fibra de coco (FC) (r=0,83 e 0,72 P<0,05) e CTAC (r=0,98 e 0,99 P<0,05). Os resultados indicam que a FC e o CTAC deveriam ser usados após pré-lavagens. Verificou-se que, embora a FC apresente na primeira lixiviação valor de CE superior aos demais substratos, o valor ideal da 2,0 dSm-1 é alcançado na segunda lixiviação. Os teores de K e Na são um indicativo do valor da CE em FC e CTAC.

Produtividade e resistência à ferrugem do cafeeiro (Hemileia vastatrix BERK. ET BR.) de progênies F5 de catuí amarelo com o híbrido de timor

Foram estudadas 18 progênies na geração F5 do híbrido H 419, provenientes do cruzamento entre o Híbrido de Timor (UFV 445-46) e o Catuaí Amarelo IAC 30 (UFV 2143), 5 progênies na geração F5 do híbrido H 516, proveniente do cruzamento entre o Híbrido de Timor (UFV 446-08) e o Catuaí Amarelo IAC 86 (UFV 2154) e como controle o Catuaí Vermelho IAC 44 ( UFV 2144 ) com e sem controle da ferrugem. em relação a produção de café cereja por planta e ao ataque da ferrugem as progênies H419-3-1-1-14 e a H516-2-1-1-18, foram as que apresentaram maiores produtividades e resistência a ferrugem ( nota 1 ), seguidas da H419-6-3-6-12, porém com resistência parcial à ferrugem. Essas progênies também foram as que apresentaram maior comprimento do ramo plagiotrópico, que influenciou em 37,73% (R²) na produção de café cereja por planta. O comprimento do ramo plagiotrópico, diâmetro do tronco e altura das plantas foram os atributos que mais correlacionaram r= 0.5977, r= 0.3316 e r= 0.2848, respectivamente p< 0.01, com as produtividades dessas progênies, concordando com resultados obtidos por Dhaliwal (1968). em relação a resistência ao fungo Hemileia vastatrix Berk. et Br.,as progênies apresentaram herdabilidade no sentido amplo elevada (h a² = 0,80 entre e h a² = 0,96 entre e dentro das progênies), mostrando variabilidade genética alta para seleção de material resistentes à ferrugem do cafeeiro.

Phytoseiid mites (Acari : Phytoseiidae) on Myrtaceae in the State of São Paulo, Brazil

Eighteen predatory mite species of the family Phytoseiidae are reported from three sites of the Cerrado ecosystem in the State of São Paulo, southeastern Brazil, on seven plant species of the family Myrtaceae. This paper provides a list of those species and compares relevant morphological characteristics of the specimens collected with those of the original descriptions and/or redescriptions of the corresponding species. A key is provided to help in the separation of the species mentioned in the paper. Some of the species collected have been reported as common predators on dominant crops in the region where the work was done. Their occurrence on Myrtaceae plants found naturally in the Cerrado ecosystem indicates that those plants could represent important reservoirs of those predators.

Involvement of the Central Nervous System in the Salivary Secretion Induced by Pilocarpine in Rats

The effect in rats of an anteroventral third ventricle (AV3V) electrolytic lesion on salivary secretion induced by intraperitoneal (i.p.) or intracerebroventricular (i.c.v.) injection of a cholinergic agonist (pilocarpine) was investigated. Sham- or AV3V-lesioned rats anesthetized with urethane and with a stainless steel cannula implanted into the lateral ventricle (LV) were used. The amount of salivary secretion was studied over a seven-minute period after i.c.v. or i.p. injection of pilocarpine. In sham-operated rats, i.p. injection of pilocarpine (1 mg/kg b.w.) (after 6 h, 2, 7, and 15 days) produced salivary secretion (486 +/- 21, 778 +/- 85, 630 +/- 50, and 560 +/- 55 mg/7 min, respectively). This effect was reduced 6 h, 2, and 7 days after an AV3V lesion (142 +/- 22, 113 +/- 32, and 290 +/- 62 mg/7 min, respectively), but not 15 days after an AV3V lesion (516 +/- 19 mg/7 min). I.c.v. injection of pilocarpine (120 mug in 1 muL), in sham-operated rats after 6 h, 2, 7, and 15 days also produced salivary secretion (443 +/- 20, 417 +/- 81, 496 +/- 14, and 427 +/- 47 mg/7 min, respectively). The effects of i.c.v. pilocarpine were also reduced 6 h, 2, and 7 days after an AV3V lesion (143 +/- 19, 273 +/- 14, and 322 +/- 17 mg/7 min, respectively), but not after 15 days (450 +/- 28 mg/7 min). The results demonstrate that the central nervous system, and particularly the AV3V region, is important for the effect of pilocarpine on salivary secretion in rats. Moreover, they suggest that activation of central pathways may play an important part in the salivary secretion to peripheral pilocarpine in rats.

Effect of thermocycling on bond strength and elasticity of 4 long-term soft denture liners

Statement of problem. Two problems found in prostheses with soft liners are bond failure to the acrylic resin base and loss of elasticity due to material aging.Purpose. This in vitro study evaluated the effect of thermocycling on the bond strength and elasticity of 4 long-term soft denture liners to acrylic resin bases.Material and methods. Four soft lining materials (Molloplast-B, Flexor, Permasoft, and Pro Tech) and 2 acrylic resins (Classico, and Lucitone 199) were processed for testing according to manufacturers' instructions. Twenty rectangular specimens (10 X 10-mm(2) cross-sectional area) and twenty cylinder specimens (12.7-mm diameter X 19.0-mm height) for each liner/resin combination were used for the tensile and deformation tests, respectively. Specimen shape and liner thickness were standardized. Samples were divided into a test group that was thermocycled 3000 times and a control group that was stored for 24 hours in water at 37degreesC. Mean bond strength, expressed in megapascals (Wa), was determined in the tensile test with the use of a universal testing machine at a crosshead speed of 5 mm/min. Elasticity, expressed as percent of permanent deformation, was calculated with an instrument for measuring permanent deformation described in ADA/ANSI specification 18. Data from both tests were examined with 1-way analysis of variance and a Tukey test, with calculation of a Scheffe interval at a 95% confidence level.Results. In the tensile test under control conditions, Molloplast-B (1.51 +/- 0.28 MPa [mean SD]) and Pro Tech (1.44 +/- 0.27 MPa) liners had higher bond strength values than the others (P < .05). With regard to the permanent deformation test, the lowest values were observed for Molloplast-B (0.48% +/- 0.19%) and Flexor (0.44% +/- 0.14%) (P < .05). Under thermocycling conditions, the highest bond strength occurred with Molloplast-B (1.37 +/- 0.24 MPa) (P < .05) With regard to the deformation test, Flexor (0.46% +/- 0.13%) and Molloplast-B (0.44% +/- 0.17%) liners had lower deformation values than the others (P < .05).Conclusion. The results of this in vitro study indicated that bond strength and permanent deformity values of the 4 soft denture liners tested varied according to their chemical composition. These tests are not completely valid for application to dental restorations because the forces they encounter are more closely related to shear and tear. However, the above protocol serves as a good method of investigation to evaluate differences between thermocycled and control groups.

Indium tin oxide films prepared via wet chemical route

In this work, indium tin oxide (ITO) films were prepared using a wet chemical route, the Pechini method. This consists of a polyesterification reaction between an alpha-hydroxicarboxylate complex (indium citrate and tin citrate) with a polyalcohol (ethylene glycol) followed by a post annealing at 500 degrees C. A 10 at.% of doping of Sn4+ ions into an In2O3 matrix was successfully achieved through this method. In order to characterize the structure, the morphology as well as the optical and electrical properties of the produced ITO films, they were analyzed using different experimental techniques. The obtained films are highly transparent, exhibiting transmittance of about 85% at 550 nm. They are crystalline with a preferred orientation of [222]. Microscopy discloses that the films are composed of grains of 30 nm average size and 0.63 nm RMS roughness. The films' measured resistivity, mobility and charge carrier concentration were 5.8 x 10(-3) Omega cm, 2.9 cm(2)/V s and -3.5 x 10(20)/cm(3), respectively. While the low mobility value can be related to the small grain size, the charge carrier concentration value can be explained in terms of the high oxygen concentration level resulting from the thermal treatment process performed in air. The experimental conditions are being refined to improve the electrical characteristics of the films while good optical, chemical, structural and morphological qualities already achieved are maintained. (C) 2007 Elsevier B.V. All rights reserved.

Distribuição vertical, danos e controle cultural de Stenoma catenifer Walsingham (Lepidoptera: Elachistidae) em pomar de abacate

Stenoma catenifer Walsingham is the major pest in avocado groves (Persea americana Mill.) in the Neotropical region. Management has been difficult for many reasons related to the reduced knowledge on its bioecology and the avocado growing systems. The goal of this work was to study the vertical distribution of S. catenifer in avocado plants, the gagging effect of infested fruit on its survival, and the losses caused. The experiments were conducted in a commercial grove located at the Sao Tomas de Aquino, State of Minas Gerais, Brazil, during the 2001/2002 and 2002/2003 growing season. S. catenifer was observed especially at the lower and central part of the plant, and the inner canopy was the least attacked in comparison with the north, south, east and west quadrants. These results may be important indicators for the use of am adequate sampling procedure. The highest percentage of attacked fruit had one to four larvae; in some cases up to eight individuals per fruit were found. The losses caused by the borer varied during the agricultural season, with figures close to 5% in a single evaluation, and the harvest loss may reach 27%. The bagging of infested fruit caused mortality of S. catenifer, as observed through the evaluation carried out four days later.

Electroluminescence of zinc oxide thin-films prepared via polymeric precursor and via sol-gel methods

Zinc oxide (ZnO) is an electroluminescent (EL) material that can emit light in different regions of electromagnetic spectrum when electrically excited. Since ZnO is chemically stable, inexpensive and environmentally friendly material, its EL property can be useful to construct solid-state lamps for illumination or as UV emitter. We present here two wet chemical methods to prepare ZnO thin-films: the Pechini method and the sol-gel method, with both methods resulting in crystalline and transparent films with transmittance > 85% at 550 nm. These films were used to make thin-film electroluminescent devices (TFELD) using two different insulator layers: lithium fluoride (LiF) or silica (SiO2). All the devices exhibit at least two wide emission bands in the visible range centered at 420 nm and at 380 nm attributed to the electronic defects in the ZnO optical band gap. Besides these two bands, the device using SiO2 and ZnO film obtained via sol-gel exhibits an additional band in the UV range centered at 350 nm which can be attributed to excitonic emission. These emission bands of ZnO can transfer their energy when a proper dopant is present. For the devices produced the voltage-current characteristics were measured in a specific range of applied voltage. (C) 2007 Elsevier B.V. All rights reserved.

Effect of the addition of ZnO seeds on the electrical proprieties of ZnO-based varistors

ZnO has the characteristic of presenting an intermediate value for the effective 3 eV barrier at room temperature. ZnO ceramics are applied in high-voltage systems or circuits. Attempts were made to reduce the number of effective barriers in the system by adding large particles of ZnO to the varistor composition. This procedure reduced the breakdown field of the varistors by values up to 90% lower than those initially obtained, and produced nonlinear coefficients as low as 20. (C) 2003 Elsevier B.V. B.V. All rights reserved.

Thermography and ultrasonography in back pain diagnosis of equine athletes

The object of the current study was to evaluate the efficacy of thermography and ultrasonography in the diagnosis of thoracolumbar lesions in Quarter Horse athletes and associate the different types of lesions found with the athletic modality practiced. Twenty-four horses were admitted to the Surgery Service for Large Animals of the Veterinary and Animal Science Faculty, UNESP, Botucatu, Brazil, with complaints of back problems. All the horses were submitted for physical examinations to confirm the existence of thoracolumbar alterations and then for thermography and ultrasonography Thermography was used to map the lesioned areas of this region and ultrasonography for lesion characterization. The lesions found were supraspinous desmitis, interspinous desmitis, dorsal intervertebral osteoarthritis, and impingement of the spinous processes or kissing spines. The existence of a relation between the type of event practiced by the horse and the type of lesion found was determined. In horses that competed in the barrel race, a predominance of lesions in the thoracic caudal, thoracolumbar, and cranial lumbar regions occurred, with intervertebral osteoarthritis and interspinous desmitis being the most common. In cutting horses, most of the lesions were observed in the caudal lumbar region, whereas horses competing in reining showed a preferential location for lesions in the middle lumbar, with a predominance of supraspinous desmitis and myositis. Thermography associated with ultrasonography was shown to be efficient in the diagnosis of the thoracolumbar lesions of these horses.