240 resultados para 210Pb ex, 7Be, 137Cs, Soil, Areal Activity Density
Resumo:
Soil attributes reflect influence of the geomorphic surfaces. Therefore, the objective of this work was to investigate the influence of the geomorphic surfaces on soil attributes in a topossequence from low lands to high lands in the Humaitá region, AM. A transect of 4.5 km, from the top of the slope towards the low lands was established and the geomorphic surfaces were identified and limited according to topographic and estratigraphic criteria, based on detailed field investigation. Twenty soil samples were collected in each one of the slope segments within the geomorphic surfaces (G.S.), at the following depths: G.S. I: LAa (0.0-0.16 and 0.48-0.79 m); G.S. II: Lad1 (0.0-0.13 and 0.44-0.70) and Lad2 (0.0-0.10 and 0.30-0.55 m); G.S. III: RYve1 (0.0-0.18 and 0.51-0.89) and RYve2 (0.0-0.23 and 0.58-0.91 m). The sampling depths were determined by the surface and subsurface horizon depths, defined during the soil morphological description. Physical analysis involved particle size distribution, disperse clay, soil and particle density and total porosity. The chemical analysis involved determinations of pH in water and KCl, exchangeable cations, exchangeable Al, total acidity (H+Al), available P, organic carbon. The relief variations contributed to the presence of dystrophic soils in the geomorphic surface I and eutrophic soils in the geomorphic surface III. The multivariate statistical techniques were able to separate three heterogeneous groups, equivalent to the mapped geomorphic surfaces.
Resumo:
Impacts on the environment and soil biological activity result in changes in the processes of formation of biogenic and fisiogenic aggregates. Aiming to evaluate the influence on physical and biological genesis of aggregates of Cerrado soils and determine the main environmental factors that determine the characteristics of households in the area of production under integrated crop-livestock (ICL), was developed this study in Farm Cabeceira, Maracaju-MS, in areas of ICL. The areas evaluated were: Savana, pasture/maize, corn/cotton and cotton/soybeans being evaluated during the dry (May/2009) and rainy (March 2010) season. To identify the pathways of aggregation were used morphological patterns, and established three clusters: fisiogenic, biogenic and intermediates. The aggregates were analyzed for exchangeable cations, carbon and aggregate stability, soil was analyzed for the exchangeable cations, particle size fractionation of soil organic matter, oxidizable fractions of total organic carbon, particle size analysis and soil macrofauna. In all areas studied, in the dry season, the highest values were quantified aggregate intermediates, while in the rainy season, in general, no differences were observed aggregates formed by different routes in areas except cotton/soybeans. The aggregates showed positive correlation with biogenic carbon and were found in lesser amounts compared to fisiogenic and intermediates. The different types of aggregates formed, besides having different characteristics morphological also differ as to chemical characteristics.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Pós-graduação em Agronomia (Ciência do Solo) - FCAV
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Agronomia (Energia na Agricultura) - FCA
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
In Brazil, common bean is in one of the most representative economic crops, not only because of its growing area but also because of the economic value of its production. In the crop year 2006/07, in Selvíria (MS), we analyzed the common bean yield as a function of some physical attributes of a Typic Acrustox in minimum tillage and center pivot irrigation system. The aim of this work was to evaluate among the soil physical attributes, under minimum tillage, those that better explain the variability of bean yield using the Pearson and spatial correlations,. A geostatistical grid was installed to collect data from soil and plants, with 117 sampling points in an area of 2025 m² and homogeneous slope of 0.055 m m-1. The results showed a low yield of bean, which occurred probably due to a lower density of plants that the system provided. Thus, for the minimum tillage system, the bean yield could be explained as a function of total porosity and bulk density.
Resumo:
Effects of bentazon, metolachlor, trifluralin, imazethapyr, imazethapyr+lactofen, haloxyfop-methyl, glyphosate and chlorimuron-ethyl at rates of 2 and 10 times the equivalent commercial dose on soil microbial activity was evaluated in soil samples extracted from a field never treated before. Global soil microbe respiration, estimated by CO2 production at 2, 4, 8, 12, 16, 20, 24 and 28 days of soil incubation and enzymatic activities (dehydrogenase and fluorescein diacetate hydrolysis) at 8 and 28 days were used as bioindicators. Bentazon and mixture imazethapyr+lactofen at the highest rate and haloxyfop-methyl at both rates, inhibited soil respiration although with differences in timing and duration. None of the herbicides affected FDA hydrolysis. Dehydrogenase activity was inhibited at 8 days of incubation with bentazon and imazethapyr at high rates but it was stimulated by metolachlor and imazethapyr at low rate and glyphosate at the highest rate. Herbicide effects on soil microbial activity was detected with higher sensitivity by global soil microbe respiration and dehydrogenase activity than by FDA hydrolysis. Only dehydrogenase activity and soil respiration estimations at 8 days of soil incubation had significant correlation. Results indicated the need of multiple estimations when evaluating herbicides effects on soil microbiota
Resumo:
The tillage comprises on average 25% of the cost of deploying a reed, so this cost reduction measures are desirable since they do not compromise the quality of the operation and longevity of sugarcane. The objective was to evaluate the effect of different tillage systems in Acrustox, correlating soil physical properties and characteristics of sugarcane agroindustrial plant cane and ratoon cane. We used five types of soil tillage, over experimental design in blocks with five replications. The particle size was measured every 0.1 m to 0.4 m depth, through deformed soil samples collected at the end of the first growth cycle of the culture. For other soil physical properties: bulk density, total porosity and water content, assessments were performed at the end of each cycle, collecting soil samples in layers of 0-0.20 to 0.21-0.40 m, in addition to performing the penetration resistance, using a penetrometer impact. The response of sugarcane depending on the types of tillage was determined from the evaluation of productivity per hectare of stem (TCH), sugar (TPH), the values of pol % cane (AP), sugar total recoverable (ATR) and fiber samples collected at harvest stalk of sugarcane plant and ratoon cane. In the tillage studied, there was a change of the physical attributes of the soil, causing reduced productivity in 2009/2010 crop, compared with the 2008/2009 season. In tillage system of furrowing direct lowest result was observed for TCH, especially in 2009/2010 crop, when the difference with conventional tillage was 20.53 Mg ha(-1).
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Petroleum and its subproducts are considered a treat for the environmental quality because of the many environmental accidents that may occur during exploitation, transport and storage. A common remediation technique used in the contaminated areas is based on the use of surfactants, mainly the chemical ones, because they have low production costs. In the other hand, some microorganisms have indicate capacities of producing surfactants that emulsify substances and as result, offer a bigger contact surface for the microbiota degradation. This biossurfactants stand out in comparison with the chemical surfactants because they present lower micelar concentration values, are more tolerant for temperature and pH variation, because they are biodegradable, have low toxicity, higher emulsification and hydrocarbon solubilization index. In this way, after the surfactant application, a toxicity evaluation have to be made to identify the treatment effects. In soil, the activity of some microbial enzymes can show the environmental behavior of the contaminant under different treatment conditions. Dehydrogenase is one example of those enzymes that can demonstrate indirectly the effect of the pollutant on the soil microorganisms. The aim of this paper was to evaluate the toxicity after the addition of a surfactant and/or Pseudomonas aeruginosa LBI in soil contaminated by a mineral automotive lubricant. The previous mentioned bacteria are a potential biossurfactant (rhamnolipid) producer. In order to evaluate the toxicity, the dehydrogenase test was run. In this test, trifeniltetrazolium compound (TTC) after utilized as an electron acceptor, turns into trifenil formazan (TPF), that can be indirectly quantified using the absorbance measured by the spectrophotometer UV-visible. In this way, it was possible to quantify the dehydrogenase activity from the contaminated soil samples... (Complete abstract click electronic access below)