On-line preconcentration and speciation analysis of Cr(III) and Cr(VI) using baker's yeast cells immobilised on controlled pore glass

A study was undertaken to evaluate Saccharonzyces cerevisiae as a substrate for the biosorption of Cr(III) and Cr(VI) aiming to the selective determination of these species in aqueous solutions. The yeast cells were covalently immobilised on controlled pore glass (CPG), packed in a minicolumn and incorporated in an on-line flow injection system. The effect of chemical and physical variables affecting the biosorption process was tested in order to select the optimal analytical conditions for the Cr retention by S. cerevisiae. Cr(III) was retained by the immobilised cells and Cr(VI) were retained by CPG. The speciation was possible by selective and sequential elution of Cr(III) with 0.05 mol L-1 HCl and 2.0 mol L-1 HNO3 for Cr(VI). The influence of some concomitant ions up to 20 mg L-1 was also tested. Quantitative determinations of Cr were carried out by means of inductively coupled plasma optical emission spectrometry (ICP OES). Preconcentration factors of 12 were achieved for Cr(III) and 5 for Cr(VI) when 1.7 mL of sample were processed reaching detection limits of 0.45 for Cr(III) and 1.5 mu g L-1 for Cr(VI). The speciation of inorganic Cr in different kinds of natural waters was performed following the proposed method. Spiked water samples were also analysed and the recoveries were in all cases between 81 and 103%. (c) 2005 Elsevier B.V. All rights reserved.

Europium(III) Concentration Effect on the Spectroscopic and Photoluminescent Properties of BaMoO4:Eu

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Pre-concentration of Cd(II), Cr(III), Cu(II) and Ni(II) on a column packed with free carboxymethylcellulose (CMCH)

Carboxymethylcellulose packed in to a glass column was used to pre-concentrate metallic cations from aqueous solutions. The pre-concentrated metal cations are directly eluted from the column using 5.0 mL of 1.0 mol L -1 hydrochloric acid. The optimum pre-concentration conditions are given (glass column, 16 cm length, 0.80 cm i.d., stationary phase height of 12 cm, flow-rate, 1.5 mL min -1). The recuperation efficiency achieved is greater than 95%, while the enrichment factor is 10 for 50 mL of solution (0.50 mg L -1 each).

Influence of benzoyl peroxide (BPO) on polysiloxane thin films doped with Ce(III) onto tin coated steel and their anticorrosion properties

The influence of benzoyl peroxide (BPO) on the synthesis of polysiloxane thin films doped with Ce(III) deposited onto Sn coated steel as well as their anticorrosion properties are reported. The addition of BPO, whose role is polymerize the film, showed an increase in |Z| values due to the fact that augments the crossed link bonds and therefore improves the protective feature of the film. Ce(III) does not act in the polymerization process and thus is essential the addition of BPO to obtain more resistant polysiloxane films. ©The Electrochemical Society.

Biomimetic sensor based on 5,10,15,20-tetrakis(pentafluorophenyl)-21H,23H- porphyrin iron (III) chloride and MWCNT for selective detection of 2,4-D

Exploitation of the electronic properties of carbon nanotubes for the development of voltammetric and amperometric sensors to monitor analytes of environmental relevance has increased in recent years. This work reports the development of a biomimetic sensor based on a carbon paste modified with 5,10,15,20-tetrakis(pentafluorophenyl)-21H,23H-porphyrin iron (III) chloride (a biomimetic catalyst of the P450 enzyme) and multi-wall carbon nanotubes (MWCNT), for the sensitive and selective detection of the herbicide 2,4- dichlorophenoxyacetic acid (2,4-D). The sensor was evaluated using cyclic voltammetry and amperometry, for electrochemical characterization and quantification purposes, respectively. Amperometric analyses were carried out at -100 mV vs. Ag/AgCl(KClsat), using a 0.1 mol L-1 phosphate buffer solution at pH 6.0 as the support electrolyte. Under these optimized analytical conditions, the sensor showed a linear response between 9.9 × 10-6 and 1.4 × 10-4 mol L-1, a sensitivity of 1.8 × 104 (±429) μA L mol -1, and limits of detection and quantification of 2.1 × 10 -6 and 6.8 × 10-6 mol L-1, respectively. The incorporation of functionalized MWCNT in the carbon paste resulted in a 10-fold increase in the response, compared to that of the biomimetic sensor without MWCNT. In addition, the low applied potential (-100 mV) used to obtain high sensitivity also contributed to the excellent selectivity of the proposed sensor. The viability of the application of this sensor for analysis of soil samples was confirmed by satisfactory recovery values, with a mean of 96% and RSD of 2.1% (n = 3). © 2013 Elsevier B.V.

Propriedades fotoluminescentes de complexos tetrakis (β-dicetonatos) de európio para aplicação como dispositivos conversores de luz

Pós-graduação em Química - IBILCE

Estudo dos difenilfosfinatos de lantânio ativados por cério, európio e térbio emissores luminescentes multicores

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Characterization of metal-biomass interactions in the lanthanum(III) biosorption on Sargassum sp using SEM/EDX, FTIR, and XPS: Preliminary studies

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo termoanalítico de complexos do fármaco Ibuprofeno com lantanídeos (III) leves no estado sólido com exceção do promécio

This Final Paper had as it main goal to make a thermoanalytical study of lighter trivalent lanthanides (Lanthanum, Cerium, Praseodymium, Neodymium, Samarium and Europium) with the Ibuprofen ligand (nonsteroidal anti-inflammatory) that have a general formula LnL3.nH2O, on solid state, where Ln are the Lanthanides, L is the Ibuprofen ligand and n = number of water molecules of hydration that went from 1,0 to all the compounds. In order to characterize this compounds, it has been used the thermoanalytical techniques TG-DTA (thermogravimetry - Diferential Thermal Analysis) and DSC (Diferential Scanning Calorimetry), Fourier transformed infrared spectroscopy (FTIR) and complexometric titration with EDTA. Through the TG-DTA technique, it has been possible to set the thermal stability of the compounds, the number of thermal decomposition steps and temperatures that ocurred that also provided stoichiometry to the synthesized compounds. The DSC technique has shown the enthalpy of dehydration of the samarium and europium compounds, it was not possible to see it in the other compounds due to a endothermic peak on the DSC curve not being formed. In the case of neodymium, a thermal event ocurred, in which it could be a oxidative decarboxylation right after the dehydration. The infrared was utilised to study the carboxilate groups streches, and so, suggest a ligand metals compound coordination, that to this present paper has been a bidentade bridged coordenation. At last, the complexometric tritation was used to very the ammount of metal present in each compound, and so, verify if the proposed stoichiometry was according to the theory

Effect of platele-rich plasma on healing of class III furcation defects treated with autogenous bone grafting and guided tissue regeneration: a histomorphometric sutdy in dogs

Objective: The purpose of this study was to evaluate the effects of the platelet-rich plasma (PRP) when used in combination with autogenous bone graft and bioabsorbable membrane (Resolut® ) in the treatment of Class  III furcation defects in dogs. Material and method: Class III furcation defects (5 mm in height and in depth) were surgically created in the mandibular third premolars of five mongrel dogs. After nine weeks, the lesions were treated with scaling and root planning and each defect received one of the following treatments: autogenous bone graft + membrane (group C) or PRP + autogenous bone graft + membrane (group T). After a healing period of 90 days, the animals were sacrificed. Routine histological processing and staining with hematoxilyn and eosin and Masson trichrome were performed and a histomorphometric analysis determined the effect of the treatments on periodontal tissue regereneration. Data were analyzed by Hotelling’s T-squared (p < 0.05). Result: No statistically significant difference between C and T groups was observed by the histomorphometric analysis of the furcation area. Both treatment groups demonstrated similar regenerative results with the furcation defects partially filled and periodontal regeneration limited to the experimental notches of the lesions. (p > 0.05). Conclusion: According to the present results, PRP does not enhance the periodontal regeneration in class III furcation defects treated with autogenous bone graft and bioabsorbable membrane.

Effect of platelet-rich plasma on healing of class III furcation defects treated with autogenous bone grafting and guided tissue regeneration: a histomorphometric study in dogs

The purpose of this study was to evaluate the effects of the platelet-rich plasma (PRP) when used in combination with autogenous bone graft and bioabsorbable membrane (Resolut® ) in the treatment of Class  III furcation defects in dogs. Material and method: Class III furcation defects (5 mm in height and in depth) were surgically created in the mandibular third premolars of five mongrel dogs. After nine weeks, the lesions were treated with scaling and root planning and each defect received one of the following treatments: autogenous bone graft + membrane (group C) or PRP + autogenous bone graft + membrane (group T). After a healing period of 90 days, the animals were sacrificed. Routine histological processing and staining with hematoxilyn and eosin and Masson trichrome were performed and a histomorphometric analysis determined the effect of the treatments on periodontal tissue regereneration. Data were analyzed by Hotelling’s T-squared (p < 0.05). Result: No statistically significant difference between C and T groups was observed by the histomorphometric analysis of the furcation area. Both treatment groups demonstrated similar regenerative results with the furcation defects partially filled and periodontal regeneration limited to the experimental notches of the lesions. (p > 0.05). Conclusion: According to the present results, PRP does not enhance the periodontal regeneration in class III furcation defects treated with autogenous bone graft and bioabsorbable membrane.

Effect of the competition of Cu(II) and Ni(II) on the kinetic and thermodynamic stabilities of Cr(III)-organic ligand complexes using competitive ligand exchange (EDTA)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo do efeito de cério como sensibilizador e ativador, em matrizes de difenilfosfinatos de lantânio, dopadas com európio e/ou térbio

This paper aims the preparation, characterization and study of luminescence, particularly as for the cerium ion action as activator or sensitizer, in diphenylphosphinate of lanthanum compounds trivalent ions cerium-, europium-, and/or terbium-doped. The following compounds were prepared and studied: i) La1-(x+y)CexEuy(DFF)3; ii) La1-(x+y)CexTby(DFF)3; iii) La1-(x+y+z)CexEuyTbz(DFF)3, with x = 10%, y = 5% e z = 5%. The diphenylphosphinate of lanthanum, Ln[(Ph2)PO2]3, are complexes obtained by the mixture of lanthanides chlorides with diphenylphosphinic acid, ethanol medium. These compounds make white powders, crystalline, insoluble in normal temperature and pressure, and are chemically and thermally stable. When doping with Ce3+, Eu3+ and/or Tb3+, the compounds present characteristic luminescence. Luminescent materials are made of a host matrix incorporated with few amounts of ions called activators, which are able to present luminescence after being excited by UV light or high energy radiation, and sensitizer ions, which have the role of absorbing excitation energy and transfer it to the activator, for it to emit luminescence radiation. The infrared vibrational spectroscopy indicates that the coordination occurs by the oxygens of phosphorile group with ΔνPO of about 40 cm-1 compared to the free ligand. The X Ray difractograms of compounds Eu- and/or Tb-doped are similar, but they present profile of diffraction different observed by Stucchi and col. In previous papers, indicated an influence of Ce in the crystalline phase formation of these matrices. In luminescence spectrums, the excitation that can be made by the levels of ligand in 273 nm, or cerium ion in area between 300 and 400 nm were observed. In the emission spectrum, with excitation in 273 nm, is possible to observe the emission of Ce3+ below 400 nm and the Eu3+ in 592, 611 and 617 nm, and the...as a sensitizer to.