Alterações dimensionais em pacientes submetidos à expansão rápida da maxila com aparelho do tipo Haas

The maxillary atresia is a alteration in the transverse dimension that can result in a unilateral or bilateral crossbite. For correction of atresia of the upper dental arch appliances with the intent to expand the arch of orthopedic or orthodontic manner are used, obtaining across-compatibility between the dental arches. The purpose of this study was to evaluate the dimensional changes of the maxillary in patients in the mixed dentition with atresia in the upper dental arch, using occlusal radiographs taken before, after rapid maxillary expansion and after removal of the appliance. Methods: the sample consisted of 35 patients who used the appliance type conventional Haas, in the mixed dentition, according to the standard protocol for installation, activation, containment and removal of the appliances rapid maxillary expansion. Results: the results confirm that the suture opening occurs in greater quantities in the anterior (4.3 mm) than posterior to (3.74 mm), representing a triangular opening of 7 degrees on average with the posterior opening 87% of the quantity of anterior opening. The molars region expanded about 5 mm, and the base bone 3.7 mm, representing a 74% bone expansion of the expansion teeth.

Extração seriada: considerações clínicas

The early malocclusion treatment has increased interest of orthodontic community. Among these is the serial extraction that harmonizes the differences between the amount of dental material and permanent deficiency of supporting bone. The technique is applied in mixed dentition through a predetermined sequence of extractions between deciduous and permanent teeth, in order to reach spontaneous immediately alignment of remaining permanent teeth with a minimum orthodontic mechanics. It will be reported a case where the serial extraction was performed in a growing patient with biprotrusion, Class I malocclusion and severe crowding. All functional and aesthetics goals were reached.

Parâmetros de força ideal aplicada aos principais movimenetos ortodônticos

The orthodontic movement is a result of the system of forces application and it depends on the response of periodontal tissues to this system. The forces must have a magnitude considered ideal, to has maximum response of tissue without pain or root resorption, and keep the health of the periodontal ligament, during all the tooth movement. Therefore, it seems adequate by means of an available literature to estimate parameters of ideal force, for different types of movements; with intention of assisting the orthodontists in optimum control of the tooth movement and thus to diminish the possibility to generate deleterious effects.

Variáveis que afetam o procedimento de colagem direta ortodôntica: braquetes e materiais adesivos

Following the introduction of the acid-etching technique in enamel surface, direct attachment of orthodontic appliances on the surface of the tooth and/or restorations became a routine procedure in the assembly of the fixed devices. The attainment of a success result is related to the criterion attention to the details and the steps of the bonding technique, as well as, to the knowledge of the characteristics of the adhesive materials and orthodontic brackets. This paper presents some aspects of various types of brackets and adhesives materials.

Variáveis que afetam o procedimento de colagem direta ortodôntica: procedimentos clinicos

Direct bonding of orthodontics attachments to the teeth or restoration has become a routine in fixed appliance therapy. The technique used seems to be simple, but meticulous attention to detail and steps, a thorough understanding of factors involved are needed to ensure a successful outcome into different surfaces. It is the purpose of this article to review concerning aspects to orthodontic bonding in enamel and restorations fabricated from different materials; affording assistance to the reader wiser accomplishment and successful procedure.

Confecção e montagem do set-up ortodôntico

Diagnosis and planning stages are critical to the success of orthodontic treatment, in which the orthodontist should have many elements that contribute to the most appropriate decision-making. The orthodontic set-up is an important resource in the planning of corrective orthodontics therapy. It consists of the repositioning of the teeth previously removed from the study dental casts and reassembled on its remaining basis. When properly made, the set-up allows a three-dimensional preview of problems and limitations of the case, assisting in decision-making regarding tooth extractions in cases with problems of space, amount of anchorage loss extent and type of tooth movement, discrepancy of dental arch perimeter, discrepancy of inter-arch tooth volume, among others, indicating the best option for treatment. This paper outlines the most important steps for its confection, an evaluation system and its application in the preparation of orthodontic treatment planning.

Integração ortodontia e dermatologia na busca da excelência na estética bucal

In recent years the number of adult Patients who seek esthetic treatments has increased. Among the patients main concern, lip augmentation has increased, and this procedure has been very well performed and studied by dermatologists and plastic surgeons. Although Orthodontics can achieve good esthetic results through teeth and jaw proper positioning it is a time consuming approach and it discloses some anatomical and biological limitations. Dermatology may be an excellent alternative to enhance orthodontic results through lip augmentation. The aim of this paper is to discuss some dermatology techniques currently available to augment the lips as well as describe a case report highlighting the need for interdisciplinary approach to enhance facial esthetics goals.

Montagem e confecção do set up ortodôntico

Diagnosis and planning stages are critical to the success of orthodontic treatment, in which the orthodontist should have many elements that contribute to the most appropriate decision-making. The orthodontic set-up is an important resource in the planning of corrective orthodontics therapy. It consists of the repositioning of the teeth previously removed from the study dental casts and reassembled on its remaining basis. When properly made, the set-up allows a three-dimensional preview of problems and limitations of the case, assisting in decision-making regarding tooth extractions in cases with problems of space, amount of anchorage loss extent and type of tooth movement, discrepancy of dental arch perimeter, discrepancy of inter-arch tooth volume, among others, indicating the best option for treatment. This paper outlines the most important steps for its confection, an evaluation system and its application in the preparation of orthodontic treatment planning.

Tratamento da má oclusão de classe II, divisão 1, na dentadura mista com apareljo extrabucal removivel

Extraoral appliances represent an alternative for correction of Class II malocclusions. The application of external force leads to tooth movement and influence the growth of the maxillomandibular complex. This article aims to present the removable headgear as an adjuvant in the treatment of Class II division 1 in the mixed dentition.

Effect of different bleaching protocols on dental enamel and composite resin

To evaluate changes in microhardness, roughness and surface morphology of dental enamel and composite resin after different tooth bleaching techniques. Material and Methods: Dental fragments from bovine incisors with composite resin restorations were submitted to different bleaching protocols: G1 – daily 8 hours application of a 10% carbamide peroxide (CP) gel during 21 days; G2: 3 applications of 15 minutes of a 38% hydrogen peroxide (H2O2) gel; G3: 38% H2O2 gel associated to irradiation with LED (470nm) during 6 minutes. The Knoop micro hardness of enamel and composite resin were evaluated at 1, 7, 14 and 21 days for G1, and after 1, 2 and 3 sessions for G2 and G3. The roughness and superficial morphology (atomic force microscopy) were evaluated before and at the end of the bleaching treatment. The data were analyzed by Mann-Whitney and Wilcoxon tests (=5%). Results: Significant reduction on enamel hardness was observed after 2 and 3 sessions for G2 and G3. For composite, the reduction occurred after 21 days for G1, and after 3 sessions for G2 and G3 (p<0.05). Significant reduction on roughness and superficial morphology were observed only for enamel of G1 group (p<0.05). Conclusion: The 10% CP gel promoted only superficial alterations on dental enamel, while the 38% H2O2 gel promoted mineral reduction of this dental tissue. All the bleaching protocols promoted reduction on hardness of composite resin.

Reparo periapical de dentes tratados endodonticamente submetidos a movimentação ortodôntica

The relationship of Orthodontics and Endodontics is being clarified with the development of evidence-based dentistry. However, few studies have reported the repair of periapical lesions with orthodontic treatment. Therefore, the aim of this study was to evaluate the available evidence on periapical repair of endodontically treated teeth during orthodontic movement. The strategy used was the electronic search with keywords and criteria including studies published up to July 2011. It was also carried out qualitative assessment of the articles methodology. Although a significant number of studies have reported this topic, only two filled the criteria for inclusion in this systematic review. The results obtained in the literature suggest that orthodontic treatment should be interrupted to perform endodontic treatment. During this therapy, the use of root canal dressing based on calcium hydroxide for at least 14 days, and sealer with adequate biological property are indicated. After this phase, orthodontic movement of the endodontically treated teeth can be resumed without waiting period.

Tratamento do sorriso gengival: como estabelecer proporção e harmonia

The etiology of gingival smile is multifactorial and the correct diagnosis eill determine a successful treatment planning. Altered passive eruption occurs during the final stages of tooth eruption, when apical migration of the periodontal tissues does not occur, resulting in a distance > 2mm between the alveolar crest and the cement-enamel juncrion. This change leads to the shortening of the clinical crown and even further may lead to excessive gingival exposure. For treatment, there is a necessity for the combined removal of gingiva and bone tissue. This article discusses the literature on the issue and reports a case where periodontal plastic surgery was performed for the correcrion of a gingival smile.

Frequência de ressonância e sondagem peri-implantar em implantes curtos sob carga imediata com prótese total fixa em cantiléver na arcada mandibular: acompanhamento de um ano

This paper presents a case report with the use of short dental implants and immediate prosthesis placement. After 13 months of follow-up, peri-implant probing values are near 1.87 mm and ISQ values around 78.56.

Osteotomia sagital da crista alveolar para instalação de implantes Bicon

This case report presents details of a new surgical technique for mandibular ridge sagittal osteotomy and expansion associated to immediate dental implants in atrophic ridges. The bone atrophies represents a challenge for the surgeons that intends to modify this situation. In the past, the only viable option was the onlay bone graft. However, the bone graft requests a second surgical site that certainly increases the postoperative morbidity, without mentioning the longer treatment time required. The sagittal osteotomy of the alveolar crest represents a faster option, because it eliminates the time requested for bone graft integration, providing rehabilitation of edentulous areas with thin alveolar crests that otherwise would need additi onal surgical procedures for a satisfactory result. The authors report a clinical case in which this technique was used with the installation of a Bicon dental implant in the same surgical time, showing all the steps for this single-tooth rehabilitation.

Uso de um distrator ósseo dentoimplantossuportado, feito a partir de tornos expansores convencionais, na reabilitação oral

Osteodistraction is a clinical reality, available in the last decades for the resolution of large bone deficiencies, in cases that there are pre-existing, but misplaced implants and teeth. The aims of thearticle is to present a case report in which a new possibility for bone distraction, based on tooth-implant bone distractors, made from standard orthodontic expansion-screws, was used in an area where there was an extensive need of alveolar bone and aesthetical recovery, allied to teeth and dental implant misplacement. This technique presented good clinical results, associated to effective simplicity and low cost, becoming viable clinical solution for bone tissue augmentation and aesthetical optimization. In resume, it is possible to say that the suggested technique achieved its objectives, improving the hard and soft tissue profile, whilst allowing completion of oral rehabilitation.