Modelo mecânico para estruturas lineares em concreto armado - uma abordagem acoplada entre a mecânica do dano e algoritmos de otimização

Modelos escritos através dos conceitos da Mecânica do Dano no Contínuo representam atualmente uma alternativa consistente para a simulação numérica do comportamento de estruturas constituídas por materiais quase frágeis, onde a perda de rigidez em função da fissuração crescente é o fator preponderante da resposta não-linear de seus elementos estruturais. No entanto, modelos de dano apresentam forte dependência de parâmetros internos usados para descrever os critérios e evolução das variáveis de dano, que devem ser calibrados adequadamente para uma resposta mecânica coerente da estrutura. Neste contexto, o artigo mostra um estudo sobre a calibração de parâmetros do modelo de dano de Mazars e sua aplicação na análise numérica de vigas e pórticos planos em concreto armado. O Método dos Mínimos Quadrados é adotado para resolver o problema, em conjunto com a técnica de Gauss-Newton. Em virtude da ausência de resultados experimentais para diversas classes de resistência do concreto, como referência para o processo de calibração, são adotados alguns modelos constitutivos teóricos tanto à tração quanto à compressão. Esse processo de calibração de parâmetros é incorporado a um modelo mecânico em elementos finitos para análise de barras em concreto armado, com a consideração conjunta dos mecanismos complementares de resistência ao cisalhamento, como efeito de pino, armadura transversal e engrenamento de agregados. Uma lei constitutiva exponencial para o decaimento da resistência à tração do concreto é proposta com o objetivo de simular o comportamento do tipo tension softening do material. Testes de simulação envolvendo o modelo proposto foram realizados, comparando-se com resultados experimentais e numéricos mostrando a boa precisão e capacidade de obtenção de cargas últimas em estruturas de barras em concreto armado.

Determinação do teor alcoólico de vodcas: uma abordagem multidisciplinar no ensino da física, química e matemática

In this paper, it is proposed an experimental activity to be developed with high school students, addressing the concepts of density and surface tension from a multidisciplinary approach among Physics, Chemistry and Mathematics. In this proposal, students are challenged to determine the alcohol content of vodkas from intensive physical properties of liquids. Two calibration curves were obtained, one for density and another for surface tension as a function of ethanol concentration in water. The alcohol levels obtained from these properties were very close to the values given by manufacturers, due the similarity of these beverages with ethanol-water binary mixtures.

Determinação de sacarose no xarope artificial de groselha por medidas de viscosidade: uma abordagem interdisciplinar

The development of the National Curriculum Parameters for High School (PCN) is established from a logic in which the disciplines are integrated and coordinated in order to promote interdisciplinarity. However, there are few didactic-pedagogic activities that enable teachers in practice to reach this goal. In this paper, we propose an experimental activity to be used with High School students, addressing the concept of viscosity from an interdisciplinary perspective between the disciplines of Physics and Chemistry. For that purpose, flow times of sucrose solutions of different concentrations will be measured in a glass Ford and these data will be used to construct a calibration curve, which will be used to determine the concentration of sucrose in artificial flavor syrup of gooseberry.

Desenvolvimento de dispositivos computacionais para registro de dados pluviométricos e análise operacional de pluviômetros basculantes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Acúmulo de cádmio, crômio e níquel e isolamento de micro-organismos potenciais para biorremediação em área agrícola

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Padrões de dieta em gestantes: estudo de coorte em município paulista

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Composição fenólica das partes comestíveis das uvas BRS Carmem e BRS Magna

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Metabolomic evaluation of interactions in rhizosphere between Senna spectabilis and associated microorganisms

Pós-graduação em Química - IQ

Indicadores morfométricos: uma ferramenta no diagnóstico da vulnerabilidade ambiental

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Epidemiologia molecular e estudo dos fatores de virulência de Staphylococcus aureus resistentes à oxacilina isolados de feridas em pacientes atendidos em unidades básicas de saúde da cidade de Botucatu

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização de úlceras venosas através da expressão de proteínas presentes no exsudato inflamatório

Pós-graduação em Doenças Tropicais - FMB

Simulação numérica de fluxo de águas subterrâneas do aquífero Rio Claro, na região do campus da UNESP - Rio Claro, SP

The water management in any area is highly important to the success of many business and also of life and the understanding of your relationship with the environment brings better control to its demand. I.e. hydrogeological studies are needed under better understanding of the behavior of an aquifer, so that its management is done so as not to deplete or harm it. The objective of this work is the numerical modeling in transient regime of a portion of the Rio Claro aquifer formation in order to get answers about its hydrogeological parameters, its main flow direction and also its most sensitive parameters. A literature review and conceptual characterization of the aquifer, combined with field campaigns and monitoring of local water level (NA), enabled the subsequent construction of the mathematical model by finite elements method, using the FEFLOW 6.1 ® computational algorithm. The study site includes the campus of UNESP and residential and industrial areas of Rio Claro city. Its area of 9.73 km ² was divided into 318040 triangular elements spread over six layers, totaling a volume of 0.25 km³. The local topography and geological contacts were obtained from previous geological and geophysical studies as well as profiles of campus wells and SIAGAS / CPRM system. The seven monitoring wells on campus were set up as observation points for calibration and checking of the simulation results. Sampling and characterization of Rio Claro sandstones shows up a high hydrological and lithological heterogeneity for the aquifer formation. The simulation results indicate values of hydraulic conductivity between 10-6 and 10-4 m / s, getting the Recharge/Rainfall simulation in transient ratio at 13%. Even with the simplifications imposed on the model, it was able to represent the fluctuations of local NA over a year of monitoring. The result was the exit of 3774770 m³ of water and the consequently NA fall. The model is considered representative for the...

Qualidade da água no município de Lençóis Paulista-SP e Comparação entre métodos de purificação de água

The purpose of a water treatment plant (WTP) is to provide quality water to the population in the municipality where it is operate, being directly linked to the health of the community. The efficiency of a water treatment is directly related to the quality and reliability of the methods used. The analytical results of any laboratory test or calibration is a critical process for any company today. A tool used to assist in a quality management system process is ISO/IEC 17025:2005. Given the above, the objective of this study was to evaluate the performance of an ETA located in Lençóis Paulista-SP, using the analytical results obtained by physical, chemical and microbiological determinations in the period 1-30 October 2015. Such determinations are grounded in compliance with current Ordinance 2914 the Ministry of Health and the Quality Management System, which is required for all laboratories carrying out laboratory tests for control and surveillance of water quality for human consumption

Utilização de análise de agrupamento na caracterização do perfil agrícola e climático da região sudeste do Estado de Mato Grosso

The multivariate analysis grouping was used to characterize the productive and climate profile of southeastern of Mato Grosso state. This technique allowed the junction of similar micro regions from characteristics of productivity and climatic, without the need for the assumption of the number or structure of the groups. Cluster analysis allowed the design of a mosaic of spatial heterogeneity regions. It established different profiles in the composition of groups, joining the more traditional in the culture of a species, or more productive, or those for the development of a particular culture. The results obtained by estimation of the climatic parameters and the multivariate procedures enabled the provision of systematic information that will allow farmers to better decision-making on the competitiveness and maintaining the flow of investment in agricultural sector southeastern Mato Grosso.

Construção de índice percentual de “status” de desenvolvimento sus-tentável de assentamentos rurais utilizando procedimento estatísti-co multivariado

The objective of the present work is the construction of percentual indexes of sustainable development "Status" - PIDSD (%) aiming to order and classify the rural settlements, considering agricultural, socioeconomic and environmental aspects, in order to diagnose their sustainable reality. This way, we considered multivariate statistical procedure to establish analytical descriptors - indexes - like the principal components technique (CP). The CP technique was used in a matrix formed by 47 variables observed in 50 rural settlements, distributed in seven different regions of the state of Mato Grosso, obtained from diagnostics, provided by "Mato-Grossense" Enterprise of Research, Assistance and Rural Extension S/A - EMPAER - MT, in order to obtain the indexes used in the construction of PIDSD (%). The settlements with higher PIDSD (%) were considered "higher potential" or "higher sustainable" in relation to the analyzed variables, making the establishment of assistance strategies and cooperation possible, allowing the government and civil society in general, to improve those with worse results ("lower potential" or "lower sustainable"), and search for ways to strengthen and multiply the results of the "higher potential" settlements. Vale do Seringal settlement had the best conditions in relation to the variables, mainly those of higher weigh and was considered the one with "higher potential". São Sebastião had the worst conditions and was considered "lower potential".