480 resultados para 180 days remaining


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Objectives: This in situ/ex vivo study evaluated whether a rinse with an iron solution could reduce wear and the percentage of microhardness change of human enamel and dentine submitted to erosion followed by brushing after 1 or 30 min.Design: During 2 experimental 5-day crossover phases (wash-out period of 10 days), 10 volunteers wore intraoral palatal devices, with 12 specimens (6 of enamel and 6 of dentine) arranged in 3 horizontal rows (4 specimens each). In one phase, the volunteers immersed the device for 5 min in 150 mL of cola drink, 4 times a day. Immediately after immersion, no treatment was performed in one row. The other row was brushed after 1 min using a fluoride dentifrice and the device was replaced into mouth. After 30 min, the remaining row was brushed. In the other phase, the procedures were repeated, but after immersion the volunteers rinsed for 1 min with 10 mL of a 10 mM ferrous sulphate solution. Changes in surface microhardness (%SMH) and wear (profilometry) of enamel and dentine were measured. Data were tested using ANOVA and Tukey's tests (p < 0.05).Results: the enamel presented more wear than dentine, under all experimental conditions. The iron solution caused a significant reduction on the %SMH in enamel, and a significant reduction on the wear in dentine, regardless the other conditions.Conclusions: Rinsing with an iron solution after an erosive attack, followed or not by an abrasive episode, may be a viable alternative to reduce the loss of dental structure. (c) 2006 Elsevier Ltd. All rights reserved.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Informations about fertilization and mineral nutrition of the new fusariosis-resistant pineapple cultivars are still scarce, despite the importance of this crop. The purpose of this study was to evaluate the effect of increasing doses of N on fruit yield and quality of the pineapple cultivar 'Vitoria' grown on a 'Humiluvico Espodossolo' in the region of Tabuleiros Costeiros, in the state of Paraiba. The experiment was arranged in a randomized block design, using five N doses (100, 200, 300, 500 and 600 kg ha(-1)N, as urea) applied 60, 180 and 270 days after planting (dap) with three replications. The following variables were evaluated: length and fresh matter of the 'D' leaf; contents of N, P and K in the portions with and without chlorophyll, 300 and 420 dap; average weight, yield, physical properties (fruit weight, length and medium diameter; crown weight and length) and chemical properties (pH, soluble solids -SS, titrable acidity - AT, and the SS/AT ratio) of the fruits at harvest. Increasing N doses linearly increased length and fresh matter of the 'D' leaf and N content and decrease both P and K contents of the chlorophyll portion 300 dap, but did not affect nutrient contents 420 dap; in the chlorophyll-free portion. Increasing N doses, also, led to an increase in K contents 320 dap, but to reductions 420 dap. Individual fruit weight and total yield increased with increasing N doses, as maximum values of 1.0 kg and 37.9 t ha(-1) were estimated at doses of 409.0 and 439.0 kg ha(-1) N, respectively. The N doses did not affect the fruit quality properties, which were compatible with the characteristics described for this cultivar.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work aimed to evaluate the tolerance of sugarcane cultivars to sulfentrazone, imazapic, isoxaflutole, clomazone and ametryn + trifloxysulfuron-sodium. The experiment was arranged in a randomized block design in a split-plot scheme. The cultivars were allocated to the plots and the herbicides to the sub-plots (five 8.0 m long rows and 1.5 m spacing, with 4 repetitions. The herbicides sulfentrazone (0.8 kg ha(-1)), imazapic (0.147 kg ha(-1)), isoxaflutole (0.1125 kg ha(-1)), clomazone (1.1 kg ha(-1)), ametryn (1.463 kg ha(-1)) + trifloxysulfuron sodium (0.037 kg ha-1) and control were evaluated on 3-yr-old ratoons of the cultivars IACSP94-2094, IACSP94-2101, IACSP93-3046, IACSP94-4004, IAC86-2480 and RB72454 in post emergence. The traits evaluated were: plant toxicity symptoms in the plant leaves; total chlorophyll content and photochemical efficiency (Fv/Fm) at 15, 30 and 60 days after application (DAA); height (cm) at 30 and 270 DAA, and plant stand (stalk m(-1)) at 30 and 180 DAA. Diameter (cm), estimated productivity (t ha(-1)) and quality analysis were evaluated at 270 DAA. The sugarcane cultivars IACSP94-2094, IACSP93-3046, IACSP94-4004, IAC86-2480, RB72454, and IACSP94-2101 especially, were susceptible to clomazone up to 30 DAA, due to leaf chlorosis and lower chlorophyll content, but had no effect on quality characteristics and productivity. The cultivars were also tolerant to other herbicides.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this study was to evaluate the anticoccidial efficacy of a product containing coumestans from Eclipta alba. Experimental conditions were set up as to reproduce the environment conditions for husbandry adopted in commercial broiler farms. Broilers were raised in broiler chicken shed provided with feeders, drinkers, illumination and temperature control systems and floor covering to afford an adequate nourishing environment. Male Cobb broilers (240) were assigned to four experimental groups being each experimental group set apart in rice straw-covered shed isolated with wire mesh. One-day-old broilers were reared in a coccidian-free environment with ad libitum supply of filtered water and freely available standard feed, from the 1st to the 35th day of life. The T1 group received standard feed (negative control); T2 was treated with standard feed supplemented with 66 ppm of salinomycin (positive control); groups T3 and T4 had standard feed supplemented with the ethyl acetate fraction from methanolic extract of E. alba aerial parts, which contains the coumestans WL and DWL (120 and 180 ppm, respectively). The chicken broilers were individually infected with 2 x 104 oocysts of Eimeria tenella when they were 14 days old and were monitored weekly to evaluate zootechnical parameters such as weight gain and food conversion ratio. Counting of coccidial oocyst in chiken feces was assessed from random samples, from the 21st to 28th days of life, which corresponded to 7-14 days after the infection. Five chickens selected at random from each experimental group were subsequently euthanized at 21, 28 or 35 days of life to determine the lesion score in the cecal region and to excise a cecum portion for histopathological evaluation. The group treated with coumestans from E. alba presented an average weight gain and food conversion ratio higher than the negative control group and similar to the mean value of the positive control group. Coumestan-treated groups showed a significant decrease in the oocyst counting since the 21th day of life and displayed a reduced number of macroscopic lesions. Histopathological evaluations of cecum fragments showed that both treatments induced the migration of defense cells at the site of infection. A severe destruction of the cecal lining was found in the intestinal tract of broilers fed with a coumestans dose of 180 ppm. Overall, our results validate the use of a phytotherapy containing E. alba coumestans at a dose of 120 ppm as a therapeutic or prophylactic agent against avian coccidiosis. (C) 2010 Elsevier B.V. All rights reserved.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this study was to evaluate the amount of peroxide passage from the pulp chamber to the external enamel surface during the internal bleaching technique. Fifty bovine teeth were sectioned transversally 5 mm below the cemento-enamel junction (CEJ), and the remaining part of the root was sealed with a 2-mm layer of glass ionomer cement. The external surface of the samples was coated with nail varnish, with the exception of standardized circular areas (6-mm diameter) located on the enamel, exposed dentin, or cementum surface of the tooth. The teeth were divided into three experimental groups according to exposed areas close to the CEJ and into two control groups (n=10/group), as follows: GE, enamel exposure area; GC, cementum exposed area; GD, dentin exposed area; Negative control, no presence of internal bleaching agent and uncoated surface; and Positive control, pulp chamber filled with bleaching agent and external surface totally coated with nail varnish. The pulp chamber was filled with 35% hydrogen peroxide (Opalescence Endo, Ultradent). Each sample was placed inside of individual flasks with 1000 mu L of acetate buffer solution, 2 M (pH 4.5). After seven days, the buffer solution was transferred to a glass tube, in which 100 mu L of leuco-crystal violet and 50 mu L of horseradish peroxidase were added, producing a blue solution. The optical density of the blue solution was determined by spectrophotometer and converted into microgram equivalents of hydrogen peroxide. Data were submitted to Kruskal-Wallis and Dunn-Bonferroni tests (alpha=0.05). All experimental groups presented passage of peroxide to the external surface that was statistically different from that observed in the control groups. It was verified that the passage of peroxide was higher in GD than in GE (p<0.01). The GC group presented a significantly lower peroxide passage than did GD and GE (p<0.01). It can be concluded that the hydrogen peroxide placed into the pulp chamber passed through the dental hard tissues, reaching the external surface and the periodontal tissue. The cementum surface was less permeable than were the dentin and enamel surfaces.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Purpose: This study evaluated the adhesive quality of simplified self-adhesive and conventional resin cements to Y-TZP in dry and aged conditions. Methods: Y-TZP ceramic blocks (N=192) (5 x 5 x 2 mm) were embedded in acrylic resin and randomly divided into two groups, based on surface conditioning: 96% isopropanol or chairside tribochemical silica coating and silanization. Conditioned ceramics were divided into four groups to receive the resin cements (Panavia F 2.0, Variolink II, RelyX U100 and Maxcem). After 24 hours, half of the specimens (n=12) from each group were submitted to shear bond strength testing (0.5 nun/minute). The remaining specimens were tested after 90 days of water storage at 37 degrees C and thermocycling (12,000x, 5 degrees C-55 degrees C). Failure types were then assessed. The data were analyzed using three-way ANOVA and the Tukey's test (alpha=0.05). Results: Significant effects of ceramic conditioning, cement type and storage conditions were observed (p<0.0001). The groups cleaned using alcohol only showed low bond strength values in dry conditions and the bond strength was reduced dramatically after aging. Groups conditioned using silica coating and silanization showed higher bond strengths both in dry and aged conditions. A high number of specimens failed prematurely prior to testing when they were cleaned using 96% isopropanol. Conclusion: Overall, silica coating and silanization showed higher, stable bond strengths with and without aging. The durability of resin-ceramic adhesion varied, depending on the adhesive cement type.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)