Effect of polymerization techniques and cleaning solution on flexural resistance of acrylic resin chemically activated

The purpose of this study was to evaluate the impact of different disinfection solutions on flexural resistance of chemically-activated acrylic resin. Test pieces were made of clear acrylic resin using a rectangular mold and employing two techniques: wet polymerization under pressure (n = 20) and dry polymerization under pressure (n = 20). Test pieces were subdivided into four equal groups: distilled water (control), sodium bicarbonate, 1% sodium hypochlorite and effervescent ats. The 30-day cycling technique consisted of immersing the test pieces in 100 ml of solution for 10 min three times a day and placing them in closed containers containing artificial saliva at 37°C. Subsequently, the flexural resistance of samples was tested. Data were analyzed using two-way analysis of variance (ANOVA) with forces serving as the dependent variables and the polymerization technique and cleaning agents as independent variables. Post hoc multiple comparisons were performed using Tukey’s test. There was no statistically significant difference in the flexural strength between the two polymerization techniques. The greatest flexural strength was observed for the effervescent tablets group followed by the control and 1% sodium hypochlorite groups which were statistically similar. Thus, the sodium bicarbonate solution caused the lowest flexural resistance of the test pieces.

Influência do formato do rebordo alveolar sagital em reabilitações com associação de prótese parcial removível de extremidade livre e implante ósseo integrado

The association of mandibular distal extension removable partial dentures with an osteointegrated implant is a treatment option at hasn't been fully explored by modern rehabilitation dentistry yet. The objective of this study is to evaluate, by means of the bidimensional method of finite elements, the distribution of tension on the structures supporting the distal extension removable partial denture (DERPD), associated to a 10.0 x 3.75 mm osteointegrated implant with an ERA retention system, in alveolar ridges of different shapes. Eight models were created, representing, from a sagittal perspective: Model A (MA) – a half arch with a horizontal ridge without posterior support, with the presence of the lower left canine, and a conventional DERPD, with metallic support in the incisal aspect of this canine, as replacement for the first and second pre-molars and the first and second molars of the lower left half arch; Model B (MB) – similar to MA, but different because of the presence of a 3.75 x 10.00 mm implant with an associated ERA retention system in the posterior region of the DERPD base; Model C (MC) - similar to MA, however with a distally ascending ridge format; Model D (MD) – similar to MC, but different because there is an implant associated to a retention system; Model E (ME) - similar to MA, however with a distally descending ridge format; Model F (MF) – similar to ME, but ditfferent in the sense that there is an implant with an associated ERA retention system; Model G (MG) – similar to MA, however with a distally descending-ascending ridge format; Model H (MH) – similar to MG, but different in the sense that there is an implant with an associated ERA retention system. The finite element program ANSYS 9.0 was used to load the models with vertical forces of 50 N, on each cuspid tip. The format of distal descending edge (ME and MF) was that presented worse results, so in the models with conventional RPD as in the models with RPD associated to the implant and ERA system of retention, for the structures gingival mucosa and tooth support. 1) the distally descending ridge presented the most significant stress in the model with the conventional RPD (ME) or with a prosthesis associated to an implant (MF) and 2) the horizontal ridge (MB) provided more relief to the support structures, such as the tooth and the spongy bone, when there was an implant associated to an ERA retention system. The incorporation of the implants with the ERA system retention, in the posterior area of the toothless edge, it promotes larger stability and retention to PPREL, improving the patient's masticatory acting and, consequently, its comfort and function.

In vitro reduction of Streptococcus mutans biofilm on silver nanoparticle-modified resin composite

Introduction: Currently, new methods to reduce biofilm formation on biomaterials are very studied, for example the use of silver nanoparticles, which were bactericidal. However, there are few studies investigating the benefits of these particles in dental restorative materials. Objective: This study aimed to compare in vitro the Streptococcus mutans biofilm formation on conventional light-cured composite resin with that on experimental light-cured composite resin, modified with silver nanoparticles. Material and methods: Discs were produced with either conventional resin (control group) and resin modified with different concentrations of silver nanoparticles, 0.1%, 0.3% and 0.6 % wt. (groups 1, 2 and 3, respectively). The samples were incubated in bacterial suspension (S. mutans) enriched with 20% sucrose to promote biofilm growth on the surfaces. Incubation times were 1, 4 and 7 days. After each period, adherent biofilms were disaggregated by ultrasound. Then, the numbers of viable cells recovered from the biofilms were counted through the serial dilution method. A morphological analysis of biofilm was also performed by Scanning Electron Microscopy. The data were subjected to Anova and Tukey’s test (α = 0.05). Results: The number of viable cells was statistically lower in groups 2 and 3 than in group 1 and control group, after the three incubation periods, without statistical difference between groups 2 and 3. The number of viable cells was statistically lower in group 1 than in control group, after 4 and 7 days of incubation. Conclusion: Resins modified with silver presented reduction of S. mutans biofilm on their surfaces, according to the conditions of this study.

Análise da resposta dielétrica e varistora de compostos cerâmicos multifásicos à base de Ca2CU2Ti4-xSnxO12 (0,0 < x< 4,0)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Propriedades físico-mecânicas de painéis de mdp (medium density particleboard) constituído de bambu e fibra de coco

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cultivo de Haematococcus pluvialis Flotow (Chlorophyceae) em sistema fototrófico e mixotrófico a base de meio alternativo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desenvolvimento micelial de Lentinula edodes em meios de cultivo à base de diferentes substratos orgânicos

The radial mycelial growth of Lentinula edodes (Berk.) Pegler, strain LE-96/13, was studied in culture media prepared with organic residues extract, by using substrates prepared with pineapple (Ananas comosus (L.) Merril) crown, Astrocaryum aculeatum Meyer peel, Theobroma grandiflorum Schum shell, Musa sp. (genomic group AAB, subgroup Pacovan) peel, and Musa sp. (genomic group AAB, subgroup Prata) peel, with three supplementation levels with wheat bran (0, 10 and 20%), and incubated at 25ºC. The experimental design was totally randomized, in a 5×3 factorial scheme, adding up 15 treatments with 4 repetitions, and each repetition corresponding to a Petri dish. The diameter of the colony was evaluated daily during nine days of incubation. After that period, it was verified that the highest mycelial growth averages of strain LE-96/13 of L. edodes were found in culture media prepared with T. grandiflorum Schum shell (whose supplementation with wheat bran was favorable for Mushroom development) and A. aculeatum Meyer peel (whose supplementation did not favor the mycelial growth of L. edodes in relation to the medium not supplemented).

Resíduos de bananeira como substrato base para o cultivo in vitro de Coprinus comatus

Coprinus comatus is an edible and lignolitic fungus which has presented great potential for commercial use due to its easy development in the different residues, such as banana tree leave. Thus, the mycelial growth of Coprinus comatus in culture media based on leaves of Thap-Maeo, Prata-Anã, Pelipita and Caipira banana tree cultivars, supplemented with 20% of wheat, soy and rice brans, was evaluated. 7 mm-wide discs of CCO 01/01 strain of C. comatus were inoculated in the middle of Petri dishes containing culture medium, inside a laminar flow chamber. Next, the dishes were arranged totally at random inside an incubator at 25 ºC. The daily measurements of the mycelial growth began after 24 hours, until one of the treatments reached the borders of the Petri dish. According to the results obtained, we verified that there was not effect of the kind of supplementation for culture media based on Thap-Maeo, Prata-Anã and Pelipita; the best growth averages for culture media based on Caipira were provided by wheat and rice brans. Therefore, banana residues may be a viable and ecologically correct choice for the cultivation of C. comatus, especially for Thap-Maeo and Prata Anã sorts, which provided the best growth averages, regardless of the supplementation used.

Biocompatibilidade e bioatividade de cimentos à base de silicato tricálcico: estudo in vitro e in vivo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Citotoxicidade de membranas à base de ácido polilático e poli-ε-caprolactona com a incorporação de fosfato de lantânio e oxiapatita dopada com lantânio

Desde a antiguidade, enxertos e membranas são estudados para promoverem um reparo ósseo otimizado. O reparo ósseo consiste na reabsorção do tecido necrosado e de seu coágulo, juntamente com um processo inflamatório que libera fatores de crescimento que irão reparar o osso danificado. Em algumas situações, o osso lesionado não tem a capacidade de se auto reparar, portanto, são necessárias intervenções cirúrgicas para inserir um enxerto ósseo. Entretanto, há uma grande dificuldade em se encontrar um material que forneça os fatores necessários para o crescimento ósseo. Para isso, foram confeccionadas membranas à base de ácido polilático e poli-ε-caprolactona (PLC) (Purasorb: PLC 7015 - Purac, Holanda), com a incorporação de fosfato de lantânio (PLC/LaPO4) e oxiapatita dopada com 20% de lantânio (PLC/La20OAP) pelo Instituto de Química de Araraquara, UNESP. Assim, o objetivo do presente estudo foi avaliar a citotoxicidade desses materiais por meio dos testes XTT e sobrevivência clonogênica. Os eluatos foram preparados com as membranas citadas de acordo com a ISO 10993-12. O cloridrato de doxorrubicina foi utilizado como controle positivo para ambos os testes. Como Controle Negativo (CN) foram utilizadas somente as células CHO-K1 (sem a ação de qualquer tratamento) por 24 horas. Os eluatos foram mantidos em contato com células CHO-K1 por 24 horas. Como os dados apresentaram aderência à curva normal, foi aplicada a análise de variância (ANOVA) one-way, seguido dos testes de Tukey e Dunnett (p<0,05). Verificou-se que os materiais testados não demonstraram absorbância estatisticamente diferente em relação ao CN (p>0,05; Dunnett - XTT) e também não causaram comprometimento na capacidade proliferativa das células (p>0,05; Dunnett - Sobrevivência clonogênica). Assim, pode-se concluir que as amostras de PLC, PLC/LaPO4 e PLC/La20OAP não apresentaram citotoxicidade em células CHO-K1.