Morphological caste studies in the neotropical swarm-founding polistinae wasp Angiopolybia pattern (Lepeletier) (hymenoptera: Vespidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphological study of nitrides of NbTi (50:50, by weight) alloy

Plates of NbTi (50:50, by weight) were nitrided in a nitrogen atmosphere in the temperature range 800-1000 °C for 15, 30, 60, 120 and 180 min. X-Ray diffraction and optical and electronic microscopy were used to characterize the samples. Two nitride layers were identified on the substrate: an external and continuous phase of TiN, named δ, and a deeper and discontinuous phase of Ti 2N, named ε{lunate}. The electron micrographs reveal the presence of paths rich in Nb which may be responsible for the diffusion of nitrogen into the matrix. © 1993.

Cellulose acetate membranes for osmosedimentation: Performance and morphological dependence on preparation conditions

Osmosedimentation is a new membrane-assisted separation technique, based on the rapid approach to sedimentation equilibrium when macromolecular solutions are contained within dialysis cells, in contact with solvent via a permselective membrane. Cellulose acetate membranes, cast from ternary solvent (acetone, acetic acid, water) solutions are suitable for osmosedimentation of proteins at low (2000 rpm) centrifugation speeds. Solute retention is improved when acetone-rich casting solutions are used. These membranes were examined by electron and optical microscopy, showing considerable morphological changes in the membrane support layer as the casting solution composition is changed. © 1986.

Image segmentation using morphological watershed applied to cartography

Image segmentation is a process frequently used in several different areas including Cartography. Feature extraction is a very troublesome task, and successful results require more complex techniques and good quality data. The aims of this paper is to study Digital Image Processing techniques, with emphasis in Mathematical Morphology, to use Remote Sensing imagery, making image segmentation, using morphological operators, mainly the multi-scale morphological gradient operator. In the segmentation process, pre-processing operators of Mathematical Morphology were used, and the multi-scales gradient was implemented to create one of the images used as marker image. Orbital image of the Landsat satellite, sensor TM was used. The MATLAB software was used in the implementation of the routines. With the accomplishment of tests, the performance of the implemented operators was verified and carried through the analysis of the results. The extration of linear feature, using mathematical morphology techniques, can contribute in cartographic applications, as cartographic products updating. The comparison to the best result obtained was performed by means of the morphology with conventional techniques of features extraction. © Springer-Verlag 2004.

Morphological characteristics of neuromuscular junctions of the opossum (Didelphis albiventris) extraocular muscles: a scanning-electron-microscopic study

Three types of neuromuscular junctions were described in the extraocular muscles of the opossum. The present study demonstrates the three-dimensional characteristics of these neuromuscular junctions after HCl connective tissue digestion. Adult opossum of both sexes were used and the neuromuscular junctions of the extraocular muscles were examined after removal of the intramuscular connective tissue and basal layer. This material was examined with a scanning electron microscope. Two types of 'en plaque' neuromuscular junction were described: the continuous type revealed elongated and branched primary synaptic grooves separated from each other by sarcolemma protuberances with different sizes, and the discontinuous or punctiform type which presents very shallow and discontinuous grooves when compared with the former. The multiple neuromuscular junctions were observed as two or three junctions associated with the same muscular fiber. The multiple junctions were present in thin fibers (around 11 microm caliber); the en plaque junctions were associated with large diameter fibers (around 21 microm). This study confirms and reveals the detailed morphological characteristics of the three neuromuscular junction types previously described by transmission electron microscope in the extraocular muscles of opossum.

Morphological aspects of rabbit masseter muscle after cervical sympathectomy

The objective of this paper was to study the effect of sympathetic innervation on morphological and histochemical aspects of skeletal muscle tissue. Rabbit masseter muscle was studied using histochemical and immunohistochemical methods for periods of up to 18 months post-sympathectomy. The morphological and enzymatic characteristics of control masseter muscles were similar on both the left and right sides. The main features were muscle fibres with a mosaic pattern and a predominance of type IIa fibres, followed by type I. Type IIb fibres showed very low frequency. Sympathectomized animals showed varying degrees of metabolic and morphological alterations, especially 18 months after sympathectomy. The first five groups showed a higher frequency of type I fibres, whilst the oldest group showed a higher frequency of type IIb fibres. In the oldest group, a significant variation in fibre diameter was observed. Many fibres showed small diameter, atrophy, hypertrophy, splitting, and necrosis. Areas with fibrosis were observed. Thus cervical sympathectomy induced morphological alterations in the masseter muscles. These alterations were, in part, similar to both denervation and myopathy. These findings indicate that sympathetic innervation contributes to the maintenance of the morphological and metabolic features of masseter muscle fibres.

Morphological aspects of tympanic bulla after ventral osteotomy in cats

To evaluate tympanic bulla healing after experimental ventral osteotomy in cats. Twenty adult cats were submitted to unilateral ventral bulla osteotomy and divided into two groups: cats of A1 group (n=10) were euthanized at 8 weeks and cats of A2 group (n=10), at 16 weeks postoperative. Signs of Horner's syndrome or damage to the inner ear were not found. Open-mouth radiographs taken in the immediate postoperative showed interruption in the contour of the larger compartment of the operated bulla. The result of Mcnemar'test was significant in A2 group (*p=0.0156). Macroscopic exams revealed that the operated bullae were similar to the normal ones, with preservation of the tympanic cavity. Connective tissue at the osteotomy site of the larger compartment was significantly found in the operated bullae in both groups (McNemar test: A1 p=0.0020*; A2 p=0.0078*). Histomorphometric analyses showed that the connective tissue length at the osteotomy site was shorter in A2 group than in the A1 group (Mann-Whitney test: p=0.0021*). Experimental ventral osteotomy did not alter significantly the tympanic bulla conformation and complete regeneration of tympanic bulla frequently did not occur before 16 weeks of postoperative period.

Morphological changes in the bone marrow of the dogs with visceral leishmaniasis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Molecular phylogeny of the highly diversified catfish subfamily Loricariinae (Siluriformes, Loricariidae) reveals incongruences with morphological classification

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphological and molecular characterization of Clinostomum detruncatum metacercariae infecting Synbranchus marmoratus

A complete morphological description, supported by molecular data, of Clinostomum detruncatum metacercariae is reported in this study. The metacercariae were found infecting Synbranchus marmoratus from the Paraná River, municipality of GuaÃ-ra, Paraná State, Brazil. The taenioidean uterus is the main morphological characteristic of this species. Both Neighbour-Joining (NJ) and Maximum Likelihood (ML) trees showed 2 clear separate clusters grouping together the species from the Palearctic region (Clinostomum complanatum, Clinostomum cutaneum, Clinostomum phalacrocoracis, Clinostomum philippinense) and from the Nearctic/Neotropical regions (Clinostomum marginatum, Clinostomum tataxumui, C. detruncatum, Clinostomum sp. 7). The latter clade is divided into 2 subclades grouping species from North America and Mexico (C. marginatum and C. tataxumui), and from Brazil (C. detruncatum and Clinostomum sp. 7).

Dinâmica populacional do camarão Alpheus brasileiro Anker, 2012 (Decapoda: Caridea: Alpheidae) em Cananéia, extremo sul do estado de São Paulo, Brasil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Morphological, immunohistochemical and molecular study of renal lesions in canine visceral leishmaniasis (CVL)

Canine visceral leishmaniasis (CVL) is an anthropozoonosis characterized by a clinically chronic progressive disease. Non lymphoid organs are also affected, especially the kidneys. Dogs with leishmaniasis usually die with renal failure despite treatment. Haematoxylin-eosin (HE) staining in kidney tissue sections has low sensitivity for parasite identification. Immunohistochemistry (IHC) and polymerase chain reaction (PCR) are efficient methods for Leishmania sp. antigen and DNA detection in cases of low parasite burden. The present study aims to identify renal lesions of CVL and correlate them with microscopic findings determined by histochemistry, IHC and PCR. Both IHC and PCR provided similar positivity for amastigote identification, 3/20 animals (15%), thus increasing detection of the parasite in renal tissues when compared with histopathologic examination. The lesion most commonly observed with visceral leishmaniasis-positive canine kidney tissue was membranoproliferative glomerulonephritis, followed by interstitial nephritis without correlation to the number of amastigotes.

Influence of morphological variables in photoelastic models with implants submitted to axial loading

Purpose: This study used 12 photoelastics models with different height and thickness to evaluate if the axial loading of 100N on implants changes the morphology of the photoelastic reflection. Methods: For the photoelastic analysis, the models were placed in a reflection polariscope for observation of the isochromatic fringes patterns. The formation of these fringes resulted from an axial load of 100N applied to the midpoint of the healing abutment attached to the implant with 10.0mm x 3.75mm (Conexão, Sistemas de Próteses, Brazil). The tension in each photoelastic model was monitored, photographed and observed using the software Phothoshop 7.0. For qualitative analysis, the area under the implant apex was measured including the green band of the second order fringe of each model using the software Image Tool. After comparison of the areas, the performance generated by each specimen was defined regarding the axial loading. Results: There were alterations in area with different height and thickness of the photoelastic models. It was observed that the group III (30mm in height) presented the smallest area. Conclusion: There was variation in the size of the areas analyzed for different height and thickness of the models and the morphology of the replica may directly influence the result in researches with photoelastic models.

Evaluation of maturity levels in the management of product development: case studies in the capital goods industry

In recent approaches to the management of product development process (PDP), maturity levels have attracted the attention of practitioners and researchers. The CMMI model contributes to evaluate the maturity levels and improvement of the product development process management. This paper, based on CMMI model, analyzes the practices adopted in two companies of the capital goods industry, which develop and manufacture equipment upon request. It was observed that on account of market conditioning factors and different practices adapted to PDP management, these companies are at different maturity levels. One company is at the initial level of maturity while the other at the most advanced one. It was also noted that the application of CMMI model can provide improvement to PDP management, as well as present guidelines to achieve higher maturity levels, adequate to companies' needs.

Brazilian soccer players and no-players adolescents: effect of the maturity status on the physical capacity components performance

The aim of this study was to compare the speed and the agility between Brazilian soccer players and non-players, regarding maturity status in adolescents 11-15 years old. Forty and two soccer players (age – 159.30±17.28 months old; weight – 48.45±9.96 kg; height – 1.53±0.10 m) and 45 non-players (age – 162.62±24.92 months old; weight – 48.30±8.35 kg; height – 1.54±0.12 m) participated of this study. Participants were classified by maturity status. On 2 different days with 1 week of differences between the assessments the participants were evaluated the agility, by Shuttle Run test, and the speed, by 30 m maximum speed test. The results showed that the maturity status was an influential factor in the performance with better results for individuals in a more advanced stage. The soccer practice does not seem to interfere in the performance of the physical capacity components analyzed, only effective when different maturity levels are involved in the analysis. It is also possible that late maturing boys selectively drop-out of soccer as age and sport specialization increase.