Estudo comparativo in vitro da resistência ao cisalhamento de sistemas adesivos em dentina humana: uso de hipoclorito de sódio em sistemas convencionais ou primers acidificados

Pós-graduação em Odontologia Restauradora - ICT

Efeito do laser Nd:Yag no pré-tratamento dentinário e selamento marginal, em restaurações de cimento de ionômero de vidro resina modificado

Pós-graduação em Odontologia Restauradora - ICT

A estabilidade dos mini-implantes ortodônticos

The mini-implant has become a device for anchorage quite widespread and current employee in Orthodontics. The effectiveness of mini-implant is mostly due for its stability primary, however is important to understand about factors that influence the stability. This article presents a review of literature in the database, and as a criterion for inclusion in articles published on the factors related to the stability of mini-implant carried out on humans and animals. The articles was selected according selection criteria related to stability, The factors of mini-implants stability have been described in the literature with scattered scientific information, most of them just as clinical observations. However, these factors of stability can be classified in relation to screw, professional and patient.

Resistência de união, índice de remanescente adesivo e avaliação da presença de esmalte sobre a base de braquetes após descolagem: estudo in vitro

Pós-graduação em Ciências Odontológicas - FOAR

Avaliação cefalométrica das alterações esqueléticas, dentárias do perfil facial naturais e induzidas pelos aparelhos de Herbst e Bionator no tratamento da má oclusão de Classe II, divisão 1ª

Pós-graduação em Ciências Odontológicas - FOAR

Estudo biométrico das furcas radiculares vestibular, mesial e distal dos primeiros e segundos molares superiores permanentes de humanos

Foram analisados 100 dentes primeiros molares e 100 dentes segundos molares superiores, direitos e esquerdos, permanentes, extraídos de humanos, com o objetivo de explorar a região anatômica da furca, mais especificamente realizar medidas das distâncias das aberturas das furcas vestibular, mesial, e distal até à junção esmalte-cemento, e das distâncias das referidas aberturas até às faces radiculares pertinentes: vestibular, mesial, distal e lingual. Utilizou-se para mensuração um microcomputador 486 DX-66Mhz, no qual estava instalado um software analisador de imagens Mocha-Jandel Scientific SigmaScan Pro, version 2.0. Em relação às distâncias das aberturas das furcas até à junção esmalte-cemento foi observado que as distâncias médias para a furca vestibular foram de 3,50mm e 3,03mm; para a furca mesial de 4,44mm e 4,69mm; para a furca distal de 4,26mm e 3,73mm, respectivamente para os primeiros e segundos molares superiores. Em relação às distâncias das aberturas das furcas até às faces radiculares pertinentes foi observado que as distâncias médias da furca vestibular até à face mesial da raiz mesio-vestibular foram de 3,78mm e 3,72mm; da furca vestibular até a face distal da raiz disto-vestibular 3,62 e 3,64mm; da furca mesial até à face vestibular da raiz mesio-vestibular 7,33mm e 6,89mm; da furca mesial até a face lingual da raiz lingual de 4,13mm e 4,33mm; da furca distal até à face vestibular da raiz disto-vestibular de 5,61mm e 5,09mm; da furca distal até a face lingual da raiz lingual de 4,73mm e 4,65mm, respectivamente para os primeiros e segundos molares superiores.

Can cone-beam computed tomography superimposition help orthodontists better understand relapse in surgical patients?

This case report describes the interdisciplinary treatment of a 19-year-old Brazilian man with a Class I malocclusion, a hyperdivergent profile, an anterior open bite, and signs of temporomandibular joint internal derangement. The treatment plan included evaluation with a temporomandibular joint specialist and a rheumatologist, orthodontic appliances, and maxillomandibular surgical advancement with counterclockwise rotation. Cone-beam computed tomography images were taken before and after surgery at different times and superimposed at the cranial base to assess the changes after orthognathic surgery and to monitor quantitatively the internal derangement of the temporomandibular joints and surgical relapse. Our protocol can improve the orthodontist's understanding of surgical instability, demonstrate the clinical value of cone-beam computed tomography analysis beyond the multiplanar reconstruction, and guide patient management for the best outcome possible.

The edentulous ridge expansion (ERE) technique an experimental study in the dog

Objective: To compare the healing and bony crest resorption at implants installed conventionally or applying an edentulous ridge expansion (ERE) technique in the maxilla.Material and methods: In six Labrador dogs, the first and second maxillary incisors were extracted bilaterally. In the left side of the maxilla (Test), the flaps were elevated and the buccal plate of the alveoli and septa was removed. After 3 months of healing, partial-thickness (split) flaps were dissected and the residual alveolar bone was exposed. In the right side of the maxilla, an implant was installed conventionally (Type IV; Control) while, in the left side, the ERE technique was adopted. Hence, an expansion of the buccal bony crest was obtained, and the implant was subsequently installed (Test). After 3 months of healing, biopsies were obtained and ground sections were prepared for histological analyses.Results: A buccal vertical resorption of the bony crest of 2.2 +/- 1.2 mm and 1.6 +/- 0.7 mm was found at the test and control sites, respectively. The difference, however, did not reach statistical significance. The coronal level of osseointegration at the buccal aspect was located at 3.1 +/- 1.0 mm and 2.2 +/- 0.7 mm from the implant shoulder at the test and control sites, respectively, the difference being statistically significant. The mean values of the mineralized bone-to-implant contact (MBIC%) ranged from 43% to 48% at the buccal and lingual sites. No differences reached statistical significance.Conclusions: Implants installed by applying an ERE technique may osseointegrate similarly to conventional implant installation. However, vertical and horizontal resorption of the displaced buccal bony wall occurred as well.

A digital evaluation of alveolar ridge preservation at implants placed immediately into extraction sockets: an experimental study in the dog

Objective: To compare with pristine sites bone resorption and soft tissue adaptation at implants placed immediately into extraction sockets (IPIES) in conjunction with deproteinized bovine bone mineral (DBBM) particles and a collagen membrane.Material and methods: The mesial root of the third premolar in the left side of the mandible was endodontically treated (Test). Flaps were elevated, the tooth hemi-sectioned, and the distal root removed to allow the immediate installation of an implant into the extraction socket in a lingual position. DBBM particles were placed into the defect and on the outer contour of the buccal bony ridge, concomitantly with the placement of a collagen membrane. A non-submerged healing was allowed. The premolar on the right side of the mandible was left in situ (control). Ground sections from the center of the implant as well as from the center of the distal root of the third premolar of the opposite side of the mandible were obtained. The histological image from the implant site was superimposed to that of the contralateral pristine distal alveolus, and dimensional variation evaluated for the hard tissue and the alveolar ridge.Results: After 3 months of healing, both histological and photographic evaluation revealed a reduction of hard and soft tissue dimensions.Conclusion: The contour augmentation performed with DBBM particles and a collagen membrane at the buccal aspects of implants placed IPIES was not able to maintain the tissue volume.

Influence on alveolar resorption of the buccal bony plate width in the edentulous ridge expansion (ERE) - an experimental study in the dog

Objective: To compare the hard tissue changes at implants installed applying edentulous ridge expansion (E.R.E.) at sites with a buccal bony wall thickness of 1 or 2 mm.Material and methods: In six Labrador dogs, the first and second maxillary incisors were extracted, and the buccal alveolar bony plates and septa were removed. After 3 months of healing, partial-thickness flaps were dissected, and the E.R.E. was applied bilaterally. Hence, an expansion of the buccal bony crest was obtained in both sides of the maxilla with a displacement of either a 1- or a 2-mm-wide buccal bony plate at the test and control sites, respectively. After 3 months of healing, biopsies were obtained for histological analyses.Results: A buccal vertical resorption of the alveolar crest of 2.3 +/- 0.8 and 2.1 +/- 1.1 mm, and a coronal level of osseointegration at the buccal aspect of 2.7 +/- 0.5 and 2.9 +/- 0.9 mm were found at the test (1 mm) and control (2 mm) sites, respectively. The differences did not reach statistical significance. The mean values of the mineralized bone-to-implant contact (MBIC%) ranged from 62% to 73% at the buccal and lingual sites. No statistically significant differences were found. Horizontal volume gains of 1.8 and 1.1 mm were observed at the test and control sites, respectively, and the difference being statistically significant.Conclusions: Implants installed using the E.R.E. technique yielded a high degree of osseointegration. It is suggested that the displacement of buccal bony plates of 1 mm thickness is preferable compared with that of wider dimensions.

Microtensile Bond Strenh Between Indirect Composite Resin Inlays and Dentin: Effect of Cementation Strategy and Mechanical Aging

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The Automatic Mapping of Princeton WordNet Lexical-Conceptual Relations onto the Brazilian Portuguese WordNet Database

Princeton WordNet (WN.Pr) lexical database has motivated efficient compilations of bulky relational lexicons since its inception in the 1980's. The EuroWordNet project, the first multilingual initiative built upon WN.Pr, opened up ways of building individual wordnets, and interrelating them by means of the so-called Inter-Lingual-Index, an unstructured list of the WN.Pr synsets. Other important initiative, relying on a slightly different method of building multilingual wordnets, is the MultiWordNet project, where the key strategy is building language specific wordnets keeping as much as possible of the semantic relations available in the WN.Pr. This paper, in particular, stresses that the additional advantage of using WN.Pr lexical database as a resource for building wordnets for other languages is to explore possibilities of implementing an automatic procedure to map the WN.Pr conceptual relations as hyponymy, co-hyponymy, troponymy, meronymy, cause, and entailment onto the lexical database of the wordnet under construction, a viable possibility, for those are language-independent relations that hold between lexicalized concepts, not between lexical units. Accordingly, combining methods from both initiatives, this paper presents the ongoing implementation of the WN.Br lexical database and the aforementioned automation procedure illustrated with a sample of the automatic encoding of the hyponymy and co-hyponymy relations.

Estudo in vitro da anatomia das projeções de esmalte cervical em dentes molares

The cervical enamel projection (CEP) is an anatomic variation that can be found in the cement enamel junction, it´s recognition and early diagnosis improves outcome the tooth involved, allowing greater efficiency in treatment. The knowledge of the location, grade and incidence of CEP is decisive on prevention and treatment of periodontal disease. It were studied 1200 molars (600 mandibular molars and 600 maxillary molars) separated from the collection of teeth on the Discipline of Anatomy in FOSJCampos - UNESP. Each group of 600 teeth was separated from the second side (300 teeth) and the second type (first, second or third molar). Each tooth had thoroughly inspected the cervical region, in all their faces, in order to verify the incidence and the grade of CEP in each surface. It was found that the CEP covered in 278 (23,17%) teeth was 146 (52,52%) mandibular molars and 132 (47,48%) maxillary molars. The CEPs were concentrated on a tooth surface in 222 (79,86%) teeth, in two surfaces 53 (19,06%) teeth, and in three surfaces in three (1,08%) teeth. From the total of 4.800 surfaces examined the CEPs were found in 337 surfaces, and 228 (67,66%) surfaces of the grade I, 60 (17,8%) grade II and 49 (14,54%) grade III. The buccal surface presented 207 (61,42%) CEP, the lingual surface in 57 (16,91%), the mesial surface in 35 (10,39%) and the distal surface in 38 (11,28%) CEP. The results of this study demonstrated that the CEPs have focused more on the mandibular teeth on only one surface of the tooth, the grade I was the most found and the buccal surface the most involved

Avaliação da prevalência do tipo de crescimento crânio facial nas diferentes más oclusões, de acordo com a classificação de angle

During the orthodontic correction planning in addition to dental-jaw correction, facial aesthetics is the orthodontist's and patient's major concern. To prevent facial aesthetics damage is really important to take into account the type of craniofacial growth: mesofacial (balanced), dolichofacial (vertical) or brachyfacial (horizontal). We evaluated 152 documentation files from the Department of Orthodontics of Dental University of Sao Jose dos Campos- UNESP in order to analyze what kind of growth occurs in most Class I malocclusions, Class II and Class III Angle of treated individuals from 6 to 12 years old. From the randomly collected samples, 15 of them belonged to Class I Angle malocclusions; 123 belonged to Angle Class II and 14 to Class III malocclusion. The results showed that in Class I, 66.67% were classified as dolicocephalic; in Class II, 64.23% were classified as dolicocephalic and in Class III, 50% were brachycephalic. We conclude that the dolichofacial was the type which ocurred the most, both in females and males and both in malocclusion Class I and Class II. The brachyfacial type most occurred in Class III malocclusion and the mesofacial type occurred in smaller numbers in the three malocclusions studied

Diagnóstico e tratamento precoce da Classe III: relato de um caso clínico

In malocclusion studies, may happen not only dental discrepancies but even skeletal discrepancies. In Class III malocclusion can be observed underdeveloped maxilla, mandible protraction or both of them, and, in most of the times associated with a narrow maxilla that causes anterior or posterior crossbites, in one side or in two sides. The aim of this case report is to evaluate the facial profile and occlusal effects of interceptive orthodontics therapy. The treatment with upper arch expansion and maxilla protraction was done in an early age to be effective in the circummaxillary sutural system and to make the orthopedic effect easier. The facial mask used is positioned on two facial points and allows an anterior maxillary replacement. Patients’ compliance is important to reach treatment success, this because using the mask still in this growth and development phase is essential to make the facial and occlusal effects happen. It is important to mention that patients with Angle Class III malocclusion need to be followed till the end of their growth.