Métodos de controle químicos e físicos de Marchantia polymorpha

Marchantia polymorpha develops under environmental conditions of high relative humidity and shading. As this habitat is the usually used in nurseries for the growth of seedlings of native tree species that species grows very quickly among developing tree seedlings and causes severe losses. This study was undertaken viewing more efficient either physical or chemical methods for the control of M. polymorpha. Two experiments were conducted under greenhouse conditions. In the first acetic acid (10, 20, and 40% of concentration), oxygenated water (50 and 100%) and the herbicides glyphosate (1,680 g AI ha) and fomesafen (375 g AI ha-1 ) were applied to the seedlings. In the second, the treatments consisted of soil previously submitted to a temperature of 105 °C for 48 hours, soil submitted to solarization in black plastic and in transparent plastic bags for 30 days, preemergence application of diuron (1,750 g AI ha-1 ) and trifluralina (1,575 g AI ha-1 ). The visual evaluations of the methods were performed 7, 14, 21, and 28 days after the application (DAA) and at 60 and 120 DAA, respectively, for the first and the second experiment. Only diuron and trifluralina resulted in a 100% control of M. polymorpha 120 DAA.

Intervenções para aumentar adesão às precauçôes padrão e/ou baseadas nas vias de transmissão de micro-organismos aos cuidados do paciente: revisão sistemática de ensaios clínicos randomizados e não randomizados, séries temporais e estudos controlados antes e depois

Pós-graduação em Enfermagem - FMB

Comportamento do carbono orgânico e de atributos químicos, físicos e microbiológicos de um solo arenoso em área de conversão pastagem - Eucalipto

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Incorporação de nanopartículas de óxido de zinco a um cimento de ionômero de vidro por meio da calcinação: avaliação de propriedades mecânicas e físicas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Controle das propriedades dinâmicas de sistemas mecânicos através da utilização de molas inteligentes

Pós-graduação em Engenharia Mecânica - FEIS

Propriedades físicas e mecânicas de cimentos de ionômero de vidro encapsulados e não encapsulados

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Colunas de Winogradsky com águas contaminadas por petróleo e derivados monitoradas por ensaios ecotoxicológicos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo da resistência à corrosão de ligas Ni-Cr-Mo-Ta E Ni-Cr-Mo-W em solução NaF 0,08 mol/L, pH 4,7 para aplicações odontológicas

A large number of metal alloys are used in Dentistry for the manufacture of fixed and removable dentures. In the oral cavity, these structures are exposed to a chemically aggressive medium, like saliva and mechanical efforts, like mastication. In addition, acidic solutions containing fluoride ions are also frequently used in dental treatments to prevent dental plates and decays development. In this context, it was considered important to investigate the influence that a fourth element could exert when added to the ternary alloy Ni-Cr-Mo, largely used in Brazil. Therefore, electrochemical tests were done to evaluate the resistance to corrosion of quaternary alloy 65Ni-25Cr-5Mo-5Ta and 65Ni-25Cr-5Mo-5W in NaF solution 0,08mol / L, pH = 4.7. For greater understanding the microstructure and morphology of alloys were studied, through metallographic analysis, using optics microscopy and electron microscopy scanning. For the electrochemical tests were applied techniques traditionally used in corrosion researches, such as: potential measures in open circuit (OCP) and cyclic polarization (CP). It was found that both quaternary alloys showed very similar results. Comparing these quaternary alloys with the ternary 65Ni-25Cr-10Mo, it was found that the quaternary alloys exhibit greater resistance to corrosion, in other words, less passivation current density than the ternary alloy, showing that it is advantageous to add a fourth element in the alloy

Concepção detalhada de uma bancada para simular esforços mecânicos em colunas de perfuração

In this work we study the construction of a test rig made to simulate the Mechanical efforts in wich a drillstring is submitted. The model is based on the rig built at IDS, Germany. There are some fault liabilities while doing the project of the axis. Therefore it's important to analyze and take knowledge of this efforts in order to predict failures like rupture or fatigue collapse. The main objective of this theis is to show the operating principle of the test rig and it's construction. The accomplished study allow us to predict the drillstring behavior and from the economic point of view that is very important because failures results in equipments maintenance that requires time and money causing prejudice to the company. Using SolidWorks, a simulation software, the thesis approaches all the mechanical parts required for it's construction as well as it's working principle. Acquisition sensors like strain gauges, accelerometer, and torque transductor were also used in this model. The objective of this thesis is to create a simulation model to be eventually at FEG(UNESP). During the development of the study, it was possible to learn more about the drilling process and the mechanical efforts in which the drill pipe is submitted. The accomplished contributed with knowledge for the student in the drilling process area. Also during the development of the study it was possible to have contact with different areas of engineering but the study is specifically directed to the construction of the test rig. Therefore the main theme of this thesis is to show the operating principle of the test rig and it's construction

Projeto de adaptação do sistema de injeção do túnel transônico para ensaios em bocais de foguete

In this work, the project of a new experimental facility to be installed at the Aerodynamics Division of the Institute of Aeronautics and Space is presented. This new facility will provide means to perform experimental campaigns to analyze the flow behavior at different rocket nozzle concepts using cold gas that will be obtained from a modification of the Pilot Transonic Wind Tunnel air system. The new installation will enable less expensive experiments in a more secure environment, since the cold gas experimental procedures do not demand fuel storage and burn and security procedures are much less severe. Furthermore, experiments can be carried with different types of sensors, commonly used in wind tunnel tests. Also, the optical access is facilitated enabling the use of optical techniques for the characterization of flow properties inside the nozzles, such as pressure and temperature sensitive painting. The full project design and the operation conditions will be showed, as also some technical considerations about the flor behavior in the facility

Exposição de pacientes com síndrome de dor miofascial (SDM) à capsaicina: desenvolvimento de forma farmacêutica de uso tópico com possível ação analgésica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Intervenções cirúrgicas para o tratamento do pectus excavatum: revisão sistemática

Pós-graduação em Bases Gerais da Cirurgia - FMB

Influência da miliamperagem sobre a qualidade do diagnóstico das fraturas radiculares por meio de tomografia computadorizada de feixe cônico: estudo in vitro

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)