Produção de etanol a partir de sorgo sacarino com tratamento enzimático

Pós-graduação em Microbiologia Agropecuária - FCAV

Alimentação alternativa de frangos tipo colonial com resíduo agroindustrial de fruta

Pós-graduação em Ciência Animal - FMVA

Fluorescence Intensity of Composite Layering Combined with Surface Sealant Submitted to Staining Solutions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mathematical modeling of a continuous alcoholic fermentation process in a two-stage tower reactor cascade with flocculating yeast recycle

Experiments of continuous alcoholic fermentation of sugarcane juice with flocculating yeast recycle were conducted in a system of two 0.22-L tower bioreactors in series, operated at a range of dilution rates (D (1) = D (2) = 0.27-0.95 h(-1)), constant recycle ratio (alpha = F (R) /F = 4.0) and a sugar concentration in the feed stream (S (0)) around 150 g/L. The data obtained in these experimental conditions were used to adjust the parameters of a mathematical model previously developed for the single-stage process. This model considers each of the tower bioreactors as a perfectly mixed continuous reactor and the kinetics of cell growth and product formation takes into account the limitation by substrate and the inhibition by ethanol and biomass, as well as the substrate consumption for cellular maintenance. The model predictions agreed satisfactorily with the measurements taken in both stages of the cascade. The major differences with respect to the kinetic parameters previously estimated for a single-stage system were observed for the maximum specific growth rate, for the inhibition constants of cell growth and for the specific rate of substrate consumption for cell maintenance. Mathematical models were validated and used to simulate alternative operating conditions as well as to analyze the performance of the two-stage process against that of the single-stage process.

Reflexos da clarificação do caldo de cana com moringa sobre compostos inorgânicos do açúcar VHP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Seleção de famílias e progênies de irmãos completos de cana-de-açúcar para atributos tecnológicos e de produção pelo método de REML/BLUP

The objective of this study was to assess families and highlight the superior progenies of sugarcane originating from 38 biparental crosses for the following attributes: tons of cane per hectare (TCH), tons of biomass per hectare (TBIOH), brix (% cane juice), fiber content, purity, pol and total recoverable sugar (TRS). The data were analyzed by mixed model REML / BLUP in the REML (Restricted Maximum Likelihood) allowed us to estimate genetic parameters and BLUP (best linear unbiased prediction) to predict the additive and genotypic values. The best family for the attributes TCH and TBIOH was 41, whose parents are cultivars IACSP022019 x CTC9. In individual selection for TCH, the plant number 3 of Block 2, the crossing 78, showed the best results. To TBIOH the plant number 33, Block 1, family 41, showed the best results. Families 40, 41, 43, 68, 69, 79, 91, 92 and 147, were higher for the variables brix, pol, purity, and ATR, where as 85 families, 147, 148, 149, 161, 163, 177, 178, 179, and 183 were higher for fiber. The family 147 whose parents are IACSP042286 x IACSP963055, showed three progenies ranked among the top ten for both brix, and for fiber, which identifies the combination as a potential source of progenies for bioenergy production.

Does the gastroprotective action of a medicinal plant ensure healing effects? An integrative study of the biological effects of Serjania marginata Casar. (Sapindaceae) in rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comportamento do cálcio e fósforo plasmáticos, em pacientes com hipoparatireoidismo, após administração de carbonato de cálcio em diferentes formas de ingestão

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência do consumo de suco de laranja sobre marcadores bioquímicos, imunológicos e de estresse oxidativo em pacientes com hepatite C crônica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Emprego do extrato de Moringa (Moringa oleífera Lamarck) na clarificação do caldo de cana para produção de açúcar e etanol

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Alteração cromática de resinas compostas laboratoriais submetidas à imersão em diferentes soluções

The pigmentation of indirect composite resins has been one of the most common reasons that lead the restorative treatment to failure. The purpose of this study was to investigate the effect of different solutions on color stability of indirect composite resins. Five brands of indirect composite resins were tested: Adoro, Resilab, Cristobal, Sinfony and Epricord. The samples were immerged in eleven solutions (n=10): common liquid foods (coke soft drink, red wine, coffee and orange juice), mounthrinses (Listerine, Oral-B, Colgate Plax and Periogard) and bleaching agents (carbamide peroxide 16%, 7.5% and hydrogen peroxide 38%) and artificial saliva (control group). The color was measured by a spectrophotometer before and after 7, 14 and 21 days of immersion in common liquid foods, after 12, 24, 36 and 60 hours of immersion in mounthrinses and after 7 and 14 days of immersion in bleaching agents. The Cristobal and Adoro resins showed highest values of ΔE statistically significant compared to the others resin brands. Adoro’s ΔE values changed significantly after the immersion process in red wine and coffee and also between periods measured. The resins Cristobal and Sinfony showed the highest values of ΔE after the immersion process in Listerine with difference statistically significant in comparison to control group. Besides, there was difference statistically significant of the ΔE values  for  Cristobal  after  immersion  in hydrogen peroxide 7,5% in comparison to control group. It can be conclude that all the solutions promoted color change on the indirect composite resins. However, ΔE values  are  whitin  the  values clinically acceptable.

Effect of different solutions on knoop hardness of indirect composite

Introduction: Indirect dental composites may have adequate clinical performance. However, the literature is scarce regarding indirect composite resins and these solutions should be considered to maintain their properties. The aim of the study was to evaluate the influence of beverages, mouthwashes and bleaching agents on the hardness of indirect composite resins. Methods: Five different brands of indirect composite resins were evaluated: Adoro, Resilab, Cristobal, Sinfony and Epricord. Ten specimens of each brand were immersed in eleven different solutions: four mouthwashes (Listerine, Oral-B, Plax, Periogard), four beverages (coke soft drink, red wine, coffee, orange juice), three dental bleaching agents (16% peroxide of carbamide, 7.5% and 38% peroxide of hydrogen) and artificial saliva (control group). The Knoop hardness was measured before (baseline) and after 12, 24, 36 and 60 hours of immersion in mouthwashes; after 7, 14 and 21 days of immersion in beverages and after 7 and 14 days of immersion in dental bleaching agents. The results were analyzed using 3-way repeated measures ANOVA and Tukey’s test (p<0.05). Results: All resins presented significant decrease on hardness values after immersion process whereas this reduction was higher for Resilab and Sinfony. The latter exhibited the lowest initial values of hardness while Cristobol resin presented the highest hardness values. The mouthwashes promoted a significant decrease in the hardness of specimens.

Yeast CA-11 fermentation in musts treated with brown and green propolis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Reflexos do processamento de cana-de-açúcar bisada na qualidade do açúcar VHP

The aim of this study was to compare the quality of clarifi ed juice and VHP (Very High Purity) sugar produced from “bisada” sugarcane and an early maturation variety, at the beginning of harvest. The experiment was conducted at Usina São Martinho S/A, Pradópolis,SP (Brazil). The process of juice clarifi cation and sugar production was conducted at the Laboratory of Technology of Sugar and Alcohol in the College of Agricultural and Veterinary Sciences at the Universidade Estadual Paulista (FCAV/UNESP), Jaboticabal (SP). The experimental design was randomized, and two varieties were used: SP83-2847 (“bisada” sugarcane) and RB855156 (early maturation), with twelve replications for technological analysis and four replications for sugar production. The clarifi cation process and the clarifi ed juice was evaluated in terms of settling rates, volume of sludge that formed, total soluble solids, pH, turbidity, total phenolic compounds, starch and color. The sugar was characterized regarding the percentage of apparent sugar, color, total phenolic compounds, starch, fi lterability, humidity and safety factor. It was verifi ed that the processing of the juice clarifi cation was not affected by the processing of the “bisada” sugarcane. However, the clarifi ed juice from the SP83-2847 variety had a more intense color and a higher total soluble solids value. The sugar produced from the “bisada” sugarcane presented similar quality to the early maturation variety. It was concluded that the processing of “bisada” sugarcane at the start of the harvest did not affect the juice clarifi cation and resulted in VHP sugar of a quality similar to that of the early maturation variety.

Chemico-technological parameters and maturation curves of sweet sorghum genotypes for bioethanol production

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)