Estudo do conteúdo de partículas inorgânicas, da contração de polimerização e da resistência à flexão de materiais restauradores estéticos diretos indicados para dentes posteriores

Recentemente, foram lançados no mercado odontológico novos materiais estéticos para restaurações diretas em dentes posteriores, aos quais são atribuídas propriedades mais adequadas para essa indicação. Entretanto, as informações disponíveis são ainda muito escassas, gerando dúvidas quanto à sua real eficácia, sobre quais as diferenças de suas composições e propriedades físicas e mecânicas em relação aos materiais até então disponíveis e se, de fato, apresentam melhor performance clínica. Em vista do exposto, nos propusemos a estudar contração de polimerização, resistência à flexão e concentração de partículas inorgânicas, por massa e volume, de sete resinas compostas (Alert, Ariston, Solitaire, Definite, Filtek P60, Z-100 e Tetric Ceram). A contração de polimerização foi medida nos materiais inseridos em um anel plástico, e o registro das alterações, durante a polimerização, foi feito por meio de instrumento eletrônico de medida linear, que registra as alterações dimensionais, com sensibilidade de 1 mm. A resistência à flexão foi medida na máquina de ensaios mecânicos MTS 810 e a confecção dos corpos-de-prova e dos dispositivos para o ensaio foi orientada pela norma ISO no 4049:1988. A determinação do conteúdo de partículas inorgânicas por massa foi feita através da pesagem de uma porção de resina composta polimerizada antes e após a eliminação da fase orgânica em forno, à temperatura de 700oC. O porcentual volumétrico de partículas inorgânicas foi calculado com base no Princípio de Arquimedes. Foi determinado o volume da resina composta polimerizada, antes e após a eliminação da fase orgânica, pela diferença da massa do material pesado ao ar e imerso em água. Os dados de conteúdo de partículas inorgânicas por massa e por volume, de contração de polimerização e resistência à flexão foram submetidos...(Resumo completo, clicar acesso eletrônico abaixo)

Avaliação da influência dos parâmetros de processo de soldagem MIG no surgimento de poros em tubos de alumínio

The process of electric arc welding with shielding gas (GMAW) is being increasingly used in various industrial applications. This process occurs by which an electric arc is established between the work piece and a consumable in the form of wire, the arc melts the wire continuously as it is fed to the weld pool. The weld metal is protected from the atmosphere by flowing a gas (or gas mixture) inert or active. This paper presents a study of the welding process GMAW - MIG on aluminum tubes, alloy 6101 - T6, used in the manufacture of armored busbar, intended for driving electric power plants. 5(five) were welded specimens, changing certain welding parameters at each time was monitored welding joint as well as the interpass temperature. Tests were performed bending, tensile and macrographical analysis of body-of-evidence and through its results was possible to reach a better welding condition, which minimizes the appearance of pores, since the porosity has great influence on the mechanical strength and electrical conductivity of welded pipes

A cor do citrino: efeito de irradiação e tratamento térmico

Quartz crystals under natural or artificial irradiation can acquire dark shades and variations btween smoky, black and brown but when submitted at heat-treatment they can become greenish, yellowish or brownish, called citrine at gem shops. In this work a lot of samples was collected from different places in Brazil (Corinto - MG, Diamantina - MG, Sento Sé - BA and Santana do Araguaia – PA) and at first they were submitted at artificial irradiation resulting in dark colours. After that they were submitted at heat-treatment in differents temperatures and time of exposure to record when color change happened to light colours. It variated according to each origin, temperature, time of expousure and different aluminiun and other chemical elements content. Its was possible to define the ideal conditions to results better colours and related it with geology and chemical quartz composition.

Avaliação dos gases de efeito estufa a partir do carvão

This paper addresses the context of emissions of Greenhouse Gases (GHG) from activities related to Coal, called fugitive emissions. The survey of factors, development, analysis, and suggestions for controlling emissions are conducted in order to reduce risks to the environment and people around it. The greenhouse gases absorb radiation, emitted by the Earth’s surface, and hinder their escape into space. This process is essential to terrestrial life. Increasing the concentration of those gases in the atmosphere has led to an increase in the terrestrial temperature. A selection of processes that emit gases and the study and development of calculations for measuring fugitive emissions applied in different sources from coal are performed. The greenhouse gases can be released from the extraction, processing, storage, and transportation of fossil fuels to the end consumer. Coal has 4 main fugitive factors: mining, post-mining, oxidation at low temperature, and uncontrolled combustion. The coal formation process produces methane (CH4) and carbon dioxide (CO2), being the methane, the main greenhouse gas from the coal mining and handling. The types of activities and the weight of each in the issuing process are observed. It is also made comparisons between the countries with the highest emissions rates. Are evaluated what has been done and what is needed to decrease emissions, for example the use of gas as an alternative fuel for energy generation

O clima urbano de Assis/SP: estudo comparativo da temperatura e umidade relativa entre a cidade e o campo

It is known that the urban environment modifies the energy balance between the surface and the atmosphere, causing changes in temperature, relative humidity, among other things, opening the way for studies aimed at urban climatology. Based on the theme of urban climate, this research focuses on the city of Assis, located west of São Paulo. The generation of urban climate is a result of various factors, among which stand out: the use and different land use, the thermodynamic properties of buildings, number of buildings in the urban, socioeconomic activities, etc.. In general, this increases the temperature and reducing relative humidity, providing thermal discomfort. The rural environment is used for comparison studies to this theme by presenting different characteristics in relation to the structure, morphology and urban functionality. The main objective of this study is to determine the characteristics of temperature and humidity environments with the habits and occupations of the different soils in winter, at night, one inserted into the urban fabric of Assis and the other in the rural environment, to verify for evidence of changes in climatic elements because of urbanization. To collect the data will be used mini automatic weather stations that record data on temperature and humidity. For analysis of the results will be made between the data obtained in the city and the countryside, developing graphics application using Excel to tabulate the data. It was found that there were differences in the thermo-hygrometric data collection points, showing a specific urban climate in the city of Assis

Levantamento de diferentes técnicas de controle de cupins subterrâneos (Isoptera, Rhinotermitidae) em áreas urbanas e rurais

Os cupins são conhecidos também como térmitas ou térmites, formam um grupo extenso e diverso e, atualmente, há mais de 2.800 espécies descritas que se distribuem em sete famílias. Pertencentes à ordem Isoptera, os térmitas são insetos eussociais que apresentam uma organização social altamente desenvolvida e vivem em ninhos denominados de cupinzeiros, geralmente, construídos no solo. Os cupinzeiros podem ser bem resistentes e estruturalmente complexos, e neles são encontrados indivíduos morfologicamente distintos adaptados a determinadas funções que constituem as diferentes castas (reprodutores, operários e soldados), além de indivíduos imaturos (“ninfas” e “larvas”) e ovos. A presença dos cupins nos ecossistemas é de extrema importância em diversos e diferentes processos. Em linhas gerais, os cupins são bastante importantes como decompositores de matéria orgânica fragmentando os detritos orgânicos, são mediadores da humificação, participam da ligação e formação de agregados e complexos minerais argilosos, e também atuam na fixação do nitrogênio, pois seus simbiontes têm a capacidade de fixar o gás nitrogênio da atmosfera, contribuindo, dessa forma, com a fertilidade do solo. Contudo, os cupins são bem conhecidos porque causam prejuízos enormes, ou seja, pelo potencial como pragas, danificando diversos tipos de materiais celulósicos e não celulósicos, além de edificações, monumentos, plantações, etc. Os cupins subterrâneos são os que causam maiores problemas, pois possuem grande capacidade de dispersão e são animais, que devido aos hábitos crípticos, têm o estudo e o controle dificultado. Além disso, estão entre os insetos mais abundantes, sendo a maioria pertencente à família Rhinotermitidae. O controle de cupins subterrâneos é um controle diferenciado, já que possuem o ninho sob o solo e com um grande número de indivíduos. A eliminação de uma parte da colônia muitas...

Estimativa da Radiação Solar em Presidente Prudente – SP nos anos de 1999-2007

The wide territorial extension of Brazil derails the installation and maintenance of instruments for measuring solar radiation, which makes necessary the development and application of models that are able to estimate reliable and sufficient data for many different activities that use such data. And these, in most cases, are estimated from the Ångström equation. Based on this model, this project aimed to estimate the global solar radiation at Presidente Prudente-SP, Brazil, using daily data from 1999 to 2007. The solar radiation data have been extracted from the paper tapes of actinograph bi-metallic (Robitsch) daily records at the meteorological station in the Faculty of Science and Technology, UNESP. These tapes were scanned, resulting in digital images with x and y coordinates pairs (x = time; y = solar radiation, cal/min.cm²). The daily global solar radiation is the area under the curve of the image. This value has been calculated by computer algorithms. After the acquisition and calculation of the values needed to develop the Ångström equation have been determined the constants a and b, using linear regression between the values of Rg/R0 (solar radiation/solar radiation on a horizontal surface at the top of atmosphere), as ordered, and n/N (number of hours of sunshine/day length in hours) as abscissa. The slope of the line will be the constant b and the linear coefficient, the constant a. The estimated results were compared to the observed using the Kolmogorov-Smirnov test, realizing that the models can be accepted. So, the equation to aim the solar global radiation is: Rg = R0 (0,2662+0,3592 n/N)

Análise granulométrica do compósito cimentício produzido com adição de resíduos de madeira e escória

Since the early twenty-first century, the construction sector has been the second largest on the rise in the Brazilian industrial sector, with a growth of 1.4% in 2012, and is likely to remain at this level for a long time. However, unlike decades ago, the industry has been seeking in its manufacturing process, sustainable materials, encompassing in their works the concept of sustainability. Thus, the timber sector seeks to satisfy a market increasingly demanding, innovating techniques and utilization being less aggressive to the environment. The purpose of this study was to produce and evaluate the mechanical strength of the composite cement with the addition of wood residues and slag low oven. Therefore, it was made 42 specimen cement-slag-wood, carried out in two steps. Since at the first, it was varied only the slag particle size, and at the second, through the best result of the previous step, it was varied the wood particles granulometry. The mechanical performance of the composite was evaluated by the results obtained in the compression test and the physical test for determining the density of the material. In the first step of the process can be concluded that the best result was achieved with the use of slag particles retained on the 60 mesh sieve. In the second phase of the study concluded that the best results were achieved with wood particles with the large particles, i.e. particles retained on the 10 mesh sieve. Both in the first and in the second step it can be seen that there has been the influence of the particle size of the waste materials. With the obtained results, could be evaluated that the use of waste for the production of cement-slag-wood composite showed lower performance when compared to the results obtained in studies without the use of waste. However, some applications are feasible to be performed with the use of composite wood-cement-slag

Proposta para melhoria da qualidade dos produtos cerâmicos e de criação de um polo cerâmico artesanal na cidade de Indiana - SP

This work presents a proposal to create a Polo Ceramic Craft in the town of Indiana - SP, through the potter’s organization in a cooperative that will coordinate activities to add value to ceramic pieces. To achieve this, two things are essential: improving the ceramic body and improve the properties of the ceramic material. For the first action it’s necessary to create a Central Mass Production of Ceramics, to provide raw materials and homogeneous composition that results in differentiated ceramic after burning process (sintering). To this end, we propose the incorporation of additives (which act as fluxes) to the clay material. These additives can be mineral such as feldspar and nefelinas or leavings, such as glass powder obtained from disposable containers. For the second action is necessary to acquire an oven, electric or gas, it reaches higher temperatures (around 1200 ° C). The presence of the additive and burning at higher temperatures will enable better production of sintered ceramic material with less porosity and water absorption and higher mechanical strength, and pieces vitrified and glazed, allowing them to assign a higher value. For the production of these materials (thinner walls) requires a smaller volume of clayey raw materials. Besides benefiting the ceramic pieces, the proposed changes reduce the environmental impact caused by burning wood, since it will be replaced by natural gas (or electricity), and even will reduce the disposal of glass containers in the environment by recycling and incorporating this material in the clay. From a social standpoint, the cooperative is crucial to the viability of the proposed project, to coordinate activities and commercial production, which will result in better wages and profits for companies and consequently for the city and its population

Viabilidade de turbinas eólicas de pequeno porte no Brasil

Facing a global scenario where oil is scarce and the emission of CO2 in the atmosphere is a world concern, the search for new methods of energy production becomes the focus of all countries. Based on these assumptions, the wind power gains highlight and happen to be the most exploited around the world, since this does not produce toxic waste, since it uses the wind, no raw material shortage and its cost and efficiency are increasingly attractive. Taking advantage of the geographical features of Brazil, coastal and territorial extension, this study aims to analyze the feasibility of using wind turbines widely used in Germany, one of the countries with the highest production of energy through wind, in Brazil. In order to increase the energy production without causing more environmental impacts, geographical analyses will be made, and to determine the features and costs of production of this type of energy generation, and at the end of this dissertation, will finish for one of the turbines, Montana, is it feasible to install, however due to the Government's little incentive return is not very expressive. With respect to the turbine Passaat, this is infeasible to install under current conditions

Avaliação das taxas de erosão química da bacia hidrográfica do Ribeirão Monjolo Grande, Ipeúna (SP)

The development of human societies and their activities generate many impacts on the environment and natural resources. The consequence of these problems is a disturbance of the systemic dynamics of Planet Earth. Study these impacts are a way to understand the workings of this system and undertake efforts to prevent minimize and anticipate scenarios caused by environmental impacts. In this sense, from a systemic approach seeks to understand the way how is the interaction of the components of the ecosystems, adopting for this task the hydrographic basin as a natural unit of planning and management in view of the fact all landscape elements (atmosphere, hydrosphere, biosphere and geosphere) interact so that the reflections of human activities can be represented in this unit. Thus, this study aims to quantify chemical erosion rates in the hydrographic basin of Ribeirao Monjolo Grande, Ipeúna (SP), which is relevant to analyze the geomorphological characteristics of the area, which may serve to better exploitation of natural resources

Desenvolvimento de vasos digestores de amostra para microondas doméstico

The application of microwave radiation on the sample preparation has been expanding increasingly in areas involving decomposition by wet and dry roads, fusion, extraction, acceleration of chemical reactions, for example. Currently, the use of microwave ovens for analytical purposes are recognized for having excellent performance for organic and inorganic samples. In the international market there are several kinds of microwaves oven which adapt the varied purposes, however yet with elevated prices which incapacitate your use as routine equipment in laboratory. Thus, many researchers have been choosing for developing own projects of microwaves oven production or to use domestic oven for the laboratory, with or without adaptations. For the evaluation of the proposed method was used in the Kjeldahl methodology for determining total nitrogen in samples of crude protein, using a domestic microwave oven and a digester pot made up in TeflonTM and distillation by steam. Were made to adapt and characterization of a domestic microwave oven, the confeccion vessel digester and the metal support for the vessel. The accuracy of the proposed method was confirmed by comparison of two methods, the standard method for conventional heating and by the proposed method, with heating by microwave radiation through the calculated values of relative standard deviation analysis

Avaliação da toxicidade do dióxido de carbono no sistema nervoso de Apis mellifera (Hymenoptera, Apidae)

A concentração de dióxido de carbono (CO2) global eleva-se a cada ano, isso deve-se a um desequilíbrio entre as taxas de emissão deste gás por atividades antropogênicas e fontes naturais e a taxa que a biosfera e oceanos o removem da atmosfera. O CO2 é um importante constituinte químico do ambiente, pois este é um gás que aprisiona radiação infravermelha emitida pela superfície da Terra, contribuindo, assim, para a manutenção da temperatura global necessária a vida. As alterações na concentração de CO2 na atmosfera afetam inúmeros animais que dependem que estas estejam altamente controladas para poderem sobreviver. Em abelhas Apis mellifera valores elevados de temperatura ou níveis de CO2 dentro da colméia podem ter efeitos deletérios. Estes insetos são considerados bioindicadores naturais, pois apresentam diferenças fisiológicas conforme as condições do ambiente, sendo utilizadas na avaliação de efeitos a várias substâncias presentes no meio. Atualmente uma das técnicas utilizadas para a avaliação do efeito de estímulos externos é a utilização da marcação da proteína c-Fos através da expressão do gene c-fos, que indicam tanto a existência de atividade celular como também possibilita a identificação de áreas cerebrais determinadas. Esta proteína foi utilizada com o intuído de verificar se concentrações elevadas de gás carbônico são capazes de alterar as funções cerebrais da abelha Apis mellifera, comprometendo sua atividade de orientação e, conseqüentemente seu forrageamento. Marcações positivas à proteína Fos foram observadas nas regiões dos lobos ópticos e ocelos tanto do grupo controle quanto dos grupos Resumo Jacob, C. R. O. 9 expostos ao gás dióxido de carbono para todas as idades coletadas, estes resultados estão relacionados com a...(Resumo completo, clicar acesso eletrônico abaixo)

Auditoria energética em caldeira de monóxido de carbono

Within the concepts of sustainability, energy audit magnified its importance in managing systems in industrial plants. Can reduce waste and save energy representative, the improvement and development of thermal and electrical systems can be very attractive to business. With the focus on a boiler generating steam, the energy audit aimed to increase efficiency and eliminate energy losses of the heat engine. The boiler in question is commonly called CO boiler because most of the calorific power provided comes from this. Using a fuel gas from the catalyst regeneration process, it has featured in the boiler power generation system of the refinery. Burning a mixture of gaseous components from discarded into the atmosphere, the heat engine can generate tons of steam just as the other boilers installed. The challenge was to work with this gas mixture and obtain maximum efficiency, reduce moisture and enjoy the warmth of the heat exchange have been studied and recommended. Every project, from evaluation of the variables in the composition of fuel gas, to the using of heat exchangers and refrigeration system are suitable for evaluation and improvements

Atenção farmacêutica: adesão ao tratamento

O trabalho se baseia em uma revisão bibliográfica de trabalhos da literatura que abordam o tema adesão ao tratamento medicamentoso. Segundo a Organização Mundial da Saúde, a efetividade do tratamento é caracterizada pela relação estabelecida em uma atmosfera na qual as alternativas terapêuticas são exploradas, o regime terapêutico é negociado, a adesão é discutida e o acompanhamento planejado. Para a manutenção da adesão ao tratamento, o paciente precisa ser esclarecido e auxiliado quanto suas próprias decisões. Além disso, é imprescindível entender as características do indivíduo, do processo de atendimento à saúde e de aspectos referentes aos elementos envolvidos. Portanto, faz-se necessário o conhecimento do farmacêutico sobre a importância da realização de intervenções personalizadas e com divisões de responsabilidades, que juntamente com a mudança de comportamento do profissional de saúde e com a existência de um sistema de saúde que garanta o acesso aos recursos terapêuticos irão contribuir para o aumento da adesão. Neste trabalho, a adesão ao tratamento em doenças crônicas tais como diabetes, epilepsia, hipertensão, tuberculose, e HIV/AIDS é avaliada, assim como as possíveis intervenções que visam o aumento da adesão e, consequentemente, proporcionam uma melhor qualidade de vida para o paciente.