Experimental and field record of preferred temperature in the neotropical amphisbaenid Amphisbaena mertensi stauch (reptilia, amphisbaenidae)

1. 1. Temperature preference in experimental thermal gradient in the laboratory was determined and field preferred temperature was recorded, for Amphisbaena mertensi. 2. 2. Mean preferred temperature in 52 experiments averaged 21.4°C which was close to those recorded in 16 specimens measured in the field (21.1°C). 3. 3. Selected temperature varied from 12 to 27°C in the laboratory, and data taken in the field ranged from 18 to 26°C. © 1984.

The effects of temperature and busulfan (Myleran) on the yellowtail tetra Astyanax altiparanae (Pisces, Characiformes) spermatogenesis

We aimed to standardize a protocol to suppress spermatogenesis in the characiform fish, Astyanax altiparanae, for future use as a host in germ cell transplant research, opening opportunities for a range of studies, such as spermatogenesis analyses and transgenesis because this species presents livestock characteristics to be used as a biological model. The effects of the chemotherapeutic busulfan (formulated as Myleran), which is used as medicine, therefore not as toxic to humans manipulation as analytical grade busulfan (Fluka) used in previous studies, were evaluated at physiological temperature of 28 °C, ideal for growth and reproduction of A altiparanae, and also at increased temperature 35 °C. The temperature groups were divided into three treatment groups: busulfan, DMSO only, and an untreated control. Macroscopic, histologic, stereological, and ultrastructure analysis showed that, at 28 °C, busulfan did not cause depletion of germ cells in A altiparanae. However, at 35 °C, sterilization was observed 3 weeks after the initial application. Similar results were obtained with maintenance of fish at 35 °C for a longer period with no accompanying Myleran treatment. This procedure allows reduction in stress and lower mortality resulting from manipulation during busulfan injection and is also suitable for mass treatment because large numbers of fish can be incubated in warm water.

Influence of Nd:YAG laser on intrapulpal temperature and bond strength of human dentin under simulated pulpal pressure

The aim of this study was to evaluate the effects of simulated pulpal pressure (SPP) on the variation of intrapulpal temperature (ΔT) and microtensile bond strength (μTBS) to dentin submitted to an adhesive technique using laser irradiation. One hundred sound human molars were randomly divided into two groups (n = 50), according to the presence or absence of SPP (15 cm H2O). Each group was divided into five subgroups (n = 10) according to Nd:YAG laser energy (60, 80, 100, 120, 140 mJ/pulse). The samples were sequentially treated with the following: 37 % phosphoric acid, adhesive (Scotchbond Universal), irradiation with Nd:YAG laser (60 s), and light curing (10 s). ΔT was evaluated during laser irradiation using a type K thermocouple. Next, a composite resin block was build up onto the irradiated area. After 48 h, samples were submitted to microtensile test (10 kgf load cell, 0.5 mm/min). Data were analyzed by two-way ANOVA and Tukey tests (p = 0.05). ANOVA revealed significant differences for ΔT and TBS in the presence of SPP. For ΔT, the highest mean (14.3 ± 3.23 °C)(A) was observed in 140 mJ and without SPP. For μTBS, the highest mean (33.4 ± 4.15 MPa)(A) was observed in 140 mJ and without SPP. SPP significantly reduced both ΔT and μTBS during adhesive procedures, lower laser energy parameters resulted in smaller ΔT, and the laser parameters did not influence the μTBS values.

Incubation temperature manipulation during fetal development reduces adiposity of broiler hatchlings

Broilers are known as an efficient source of lean meat. Genetic selection resulted in broiler strains with large body size and fast growth, but a concomitant increase in fat deposition also occurred. Other than reducing nutrient intake, there is a lack of alternative methods to control body fat composition of broilers. The present study assessed whether incubation temperature (machine temperatures: 36ºC, 37.5ºC, and 39ºC; eggshell temperatures: 37.4 ± 0.08°C, 37.8 ± 0.15ºC, and 38.8 ± 0.33°C, respectively.) from d 13 affects broiler hatchling fat deposition. We analyzed adipocyte hypertrophy and proliferation in 3 body regions; weight and chemical composition of yolk-free chicks and yolk sacs; and serum lipid profile. Increased incubation temperature reduced abdominal and cervical adipocyte size. Independently of temperature, cervical adipocytes were smaller and showed higher proliferation than adipocytes in the abdominal and thigh regions. Smaller cervical adipocytes were observed in birds from eggs incubated at 36ºC and 39ºC. With regard to weight and composition of chicks, ash content as a percentage of dry matter was the only variable affected by temperature; it was higher in chicks from eggs incubated at 36ºC than at 39ºC and showed no significant difference between chicks incubated at 39ºC and 37.5ºC. Absolute and relative weights of yolk sacs were higher from eggs incubated at 39ºC than at 36ºC, and these two treatments did not differ from the 37.5ºC control. Absolute measures of yolk sac lipids, moisture, dry matter, and crude protein content were lower in chicks from eggs incubated at 36ºC, and no significant differences were found for these variables between chicks from eggs incubated at 37.5ºC and 39ºC. Hatchlings from eggs incubated at 36°C had significantly higher cholesterol levels than chicks incubated at the other 2 temperatures, but no additional effects on blood lipids were detected. Incubation temperature manipulation during fetal development altered cervical and abdominal adipocyte size in broiler hatchlings and could become a tool in hatcheries to manipulate chick quality, although further studies are needed to evaluate its long-term effects.

Assessment of broiler surface temperature variation when exposed to different air temperatures

This study was conducted to determine the effect of the air temperature variation on the mean surface temperature (MST) of 7-to 35-day-old broiler chickens using infrared thermometry to estimate MST, and to study surface temperature variation of the wings, head, legs, back and comb as affected by air temperature and broiler age. One hundred Cobb(R) broilers were used in the experiment. Starting on day 7, 10 birds were weekly selected at random, housed in an environmental chamber and reared under three distinct temperatures (18, 25 and 32 degrees C) to record their thermal profile using an infrared thermal camera. The recorded images were processed to estimate MST by selecting the whole area of the bird within the picture and comparing it with the values obtained using selected equations in literature, and to record the surface temperatures of the body parts. The MST estimated by infrared images were not statistically different (p > 0.05) from the values obtained by the equations. MST values significantly increased (p < 0.05) when the air temperature increased, but were not affected by bird age. However, age influenced the difference between MST and air temperature, which was highest on day 14. The technique of infrared thermal image analysis was useful to estimate the mean surface temperature of broiler chickens.

Temperature dependence of conformational properties of short polyelectrolytes from simulations at a single temperature

We use a series expansion method introduced recently by Rickman and Phillpot (Phys. Rev. Lett. 1991, 66, 349) to study the temperature dependent conformational properties of short ionized polyelectrolyte chains in ionic solutions by conducting simulations at a single temperature. The charged beads located at the sites of a cubic lattice interact through screened Coulombic interactions. It is shown that this method provides results that correlate with other Monte Carlo simulations, performed over a range of temperatures, where conformational transitions induced by thermal and screening effects occur. It is also shown that the method can be used successfully when the potential is weakly dependent on temperature. © 1994 American Chemical Society.

Low-temperature plasma: an effective approach against Candida albicans biofilm

This study evaluated the antifungal potential of low-temperature plasma (LTP) on a 72-hour Candida albicans biofilm. A growth inhibition zone test was conducted with agar plates inoculated with C. albicans and submitted to LTP and argon application at 3 and 10 mm for 10, 30, 60, 90, and 120 seconds. The groups for biofilm assays were 60 seconds of LTP application with a tip-to-sample distance of 3 mm (LTP-3) and 10 mm (LTP-10); –application of only argon gas for 60 seconds with a tip-to-sample distance of 3 mm (Ar-3) and 10 mm (Ar-10); and no treatment. The C. albicans biofilm was grown on saliva-coated discs. The medium was replaced every 24 hours. Confocal laser scanning microscopy revealed the proportion of live and dead cells, and variable pressure scanning electron microscopy (VPSEM) showed biofilm/cell structure. No inhibition zone was observed for control and either Ar groups. For the LTP groups, a progressively increasing of inhibition zone diameter was observed for different treatment durations. The LTP-3 and LTP-10 groups presented higher proportions of dead cells compared with the Ar-3 and Ar-10 groups. VPSEM revealed cell perforations in the LTP-3 and LTP-10 groups. A short period of LTP exposure demonstrated an antifungal effect on C. albicans biofilm.

Temperature Dependent Luminescence Spectra of Synthetic and Natural Alexandrite

Results of photoluminescence measurements for natural and synthetic alexandrite (BeAl2O4:Cr3+) are presented, where the samples are excited by the 488 nm line of an Ar+ laser, at different temperatures. The main issue is the analysis of the Cr3+ transition in the chrysoberyl matrix (BeAl2O4), with major technological application as active media for laser action. Results indicate anomalous behavior of Cr3+ transition depending on the measurement temperature. A simple model to explain the phenomena is suggested.

Development of technologies and methods for monitoring the spatial variability of air temperature in greenhouse environment

Climatic factors directly influence growth and productivity of plants inside greenhouses, where temperature can be considered one of the major parameter in this context. Thus, the aim of this research was to develop a low cost device for thermal sensing and data acquisition, and use it in data collection and analysis of spatial variability of temperature inside a greenhouse with tropical climate. The developed equipment for thermal measurements showed a high degree of accuracy and fast responses in measurements, proving its efficiency. The data analysis interpretations were made from the elaborations of variograms and of tridimensional maps generated by a geostatistical software. The processed data analysis presented that a greenhouse without thermal control has spatial variations of air temperature, both in the sampled horizontals layers as in the three analyzed vertical columns, presenting variations of up to 3.6 ºC in certain times.

Regulation of the abundance and turnover of copepod species by temperature, turbidity and habitat type in a large river basin

Freshwater copepods were sampled in the La Plata River basin to identify the processes that affect beta diversity and to determine the main factors influencing their geographical distribution and patterns of endemism. Beta diversity patterns exhibited strong dissimilarity between locations; the turnover process was predominant and indicated a replacement of species along the basin. Redundancy analysis indicated the presence of two large sets of species separated geographically by a boundary zone, with several associated variables. Northern species were associated with water transparency and temperature, mean air temperature, mean air temperature during winter and minimum air temperature of coldest month, indicating that these species are not tolerant to low temperatures and are abundant in reservoirs that are common in the upper stretch of the Paraná River basin. Southern species were related with amplitude of air temperature, turbidity, total phosphorus and total suspended matter, indicating that these species are polythermic and have adapted to live in river stretches. From 20 environmental variables analyzed in our study, partial least squares analysis indicated four variables with increased retention of effects on copepod abundance: air temperature, minimum temperature of coldest month, turbidity and transparency. Because almost all of the species found in this study occurred across a wide range of habitat types, the cause of the separation between river and reservoir species could be considered to be more anthropogenic than natural, and it primarily affected species abundance. For certain members of the northern group of copepod species, distribution was dependent on high temperatures, whereas the distribution of the southern group indicated that the species were polythermic.

Analysis of simple hardware efficiency for temperature measurement in agriculture and environment

This work focuses basically on the design and analysis of simple and low cost hardware systems efficiency for temperature measurement in agricultural area. The main objective is to prove quantitatively, through statistical data analysis, to what extent a simple hardware designed with inexpensive components can be used safely in the indoor temperature measurement in farm buildings, such as greenhouses, warehouse or silos. To verify the of simple hardware efficiency, its data were compared with data from measurements with a high performance LabVIEW platform. This work proved that a simple hardware based on a microcontroller and the LM35 sensor can perform well. It presented a good accuracy but a relatively low precision that can be improved when performed some consecutive signal sampling and then used its average value. Although there are many papers that explain these components, this work has the distinction of presenting a data analysis in numerical form and using high performance systems to ensure critical data comparison.