Síntese de microesferas de quitosana para aplicação em liberação controlada de drogas pelo método de atomização e coagulação

Chitosan is a natural biodegradable polymer with great potential for pharmaceutical applications due to its biocompatibility, high charge density , nontoxicity and mucoadhesion. Gel formation can be obtained by the interactions of chitosans with low molecular counterions such as polyphosphates, sulphates and crosslinking with glutaraldehyde. This gelling property of chitosan allows a wide range of applications such as coating of pharmaceuticals and food products, gel entrapment of biochemicals, whole cells, microorganisms and algae. One of its main applications is the synthesis of microspheres for coating of pharmaceuticals , magnetic particles an other substances. In such a way, we can build targeted drug delivery systems. In the present work, we applied the method of spraying and coagulation. The resulting microspheres, then, were characterized by optical microscopy

Distribuição de tensões em bocais de vasos de pressão

This work is to analyze the behavior of context concentrated stresses generated around a nozzle connected to a pressure vessel. For this analysis we used the finite element method via a computer interface, the software ANSYS WORKBENCH. It was first necessary to study and intensive training of the software used, and also a study of the ASME Code, Section VIII, which is responsible for the standards used in pressure vessels. We analyzed three cases, which differ primarily in the variation of the diameter of the nozzle in order to analyze the variation of the stresses according to the variation of the diameters. The nozzle diameters were 35, 75 and 105 mm. After the model designed vessel, a pressure was applied on the innervessel of 0.5 MPa. For the smallest diameter, was found the lowest tensions concentrated. Varying between 1 and 223 MPa. Increasing the diameter of the nozzle resulted in increased tensions concentrated around the junction nozzle /vessel. The maximum stresses increased by 78% when the value was increased in diameter from 35 to 75 mm. Since the increase in diameter from 75 to 105 mm, the values of the tensions increased around 43%. These figures emphasize that stress concentrations increased with increasing the diameter of the nozzles, but not linearly

Influência do etil-trinexapac no crescimento inicial do eucalipto

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Controle quimioterápico da mosca Stomoxys calcitrans (Insecta: Muscidae)

Pós-graduação em Medicina Veterinária - FCAV

Aplicação de produtos fitossanitários na cultura dos citros utilizando pulverizador envolvente

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Efeito Pesticida de Ésteres de Sacarose Sobre Calacarus heveae Feres (Acari: Eriophyidae) em Dois Clones de Seringueira

Sucrose esters are biodegradable, non pollutant and safe for health; moreover, they have shown great potential in the pest control. We tested a crude mix of sucrose esters on the survivorship and oviposition of Calacarus heveae Feres (Acari: Eriophyidae) females, an important rubber tree pest mite. The females were collected from rubber leaflets of the GT 1 and RRIM 600 clones. The mites were kept on stock arenas placed in rearing chamber at 28 + 0,1°C, 80 + 10% of relative humidity and 12h of light phase about two weeks before the assays. After this period, the mites were transferred to assay arenas made with leaflets from the same clone of stock arenas. The survivorship of females sprayed with sucrose esters in the concentrations of 1, 2, 3 and 4 g/L and their oviposition effect with 0.5 and 1 g/L were analyzed. The mites sprayed with 4 g/L had about 80% of mortality, while those with 1 g/L around 60%. All mites that died in the treatments with sucrose ester became dark with wrinkled tegument and decreased their body volume, suggesting dehydration. We also observed the efficacy of 1 g/L concentration to decrease the female oviposition in about 50%, in the third day after spraying. No differences were observed in the mortality and oviposition between females kept on both clones.

Efeito da aspersão de água sobre a contaminação microbiológica em esteiras transportadoras de cortes de frango

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Hormesis de glyphosate em cana-de-açúcar

Pós-graduação em Agronomia (Agricultura) - FCA

Dinâmica do nitrogênio em sistemas de produção sob semeadura direta

Pós-graduação em Agronomia (Agricultura) - FCA

Avaliação da deposição e da agitação de calda em reservatórios de pulverizadores agrícolas utilizando uma análise numérica (CFD) e experimental

Pós-graduação em Engenharia Mecânica - FEB

Efeito de protocolos de jateamento na resistência à flexão e transformação de fase cristalina em cerâmicas de Y-TZP

Pós-graduação em Odontologia Restauradora - ICT

Diretrizes básicas para projetos de vasos de pressão segundo a ASME Trabalho

In this work it was made analysis of a simple pressure vessel, using the analytical development studied in Mechanics of Materials disciplines, and then using the standard required by ASME. Following the simulation was realized using Autodesk Mechanical Simulation software to calculate the principal stresses in a pressure vessel. The simulation was done in a single vessel without nozzles, compared with the analytic calculation. After that, the simulation of another fictitious pressure vessel was done by adding three nozzles to verify the influence of the nozzles in the principal stresses and compared with the analytical results. After the simulation, it was found that the principal are bigger in the pressure vessel with nozzles, but they decrease at a small distance from the nozzle becoming equal to the stresses in the vessel without nozzles. The analytical results calculated according to the ASME agree with simulated results

Avaliação da alteração dimensional de modelos obtidos a partir de moldagens com alginato tradicional e outro com desinfetante

The present study aims at evaluating dimensional alteration of stone casts made from impressions with a standard irreversible hydrocolloid and an antimicrobial one. For this, an alginate without disinfectant (Type II Jeltrate) and other containing chlorhexidine (Type II Avagel) were used, which rose by the same regime of treatment: without disinfection; immersion; and spraying. A 1% sodium hypochlorite solution was used for 10 minutes. To obtain the impressions, a perforated impression tray was made from a standard metal model. After molding, the molds were washed in running water for 30 seconds to simulate removal of saliva. Then, with the exception of the control group, these molds were subjected to disinfection treatment. After 10 minutes they were washed again. 60 samples poured with type V special gypsum (Durone) were obtained, that were measured 3 times in a stereomicroscope (SZX12, Olympus) to record the average of dimensional alterations. The disinfection treatment did not bring significant changes in the models obtained from both alginate tested (standard p = 0.7102; with chlorhexidine p = 0.5832). The results showed a statistically significant and additional advantage of the traditional alginate on alginate with chlorhexidine, with respect to dimensional alteration (p < 0.05).

Aplicação de produtos de efeitos fisiológicos na pro- dução de brócolis tipo ramoso

Pós-graduação em Agronomia (Horticultura) - FCA

Controle de populações de Periplaneta americana (Linnaeus, 1758) (Blattodea: Blattidae) utilizando inseticida químico ou biológico

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV