Monitoramento espacial e análise das características climáticas na influência sobre a cultura de soja no estado do Paraná

In the past years, soya has increased itself as the mean agro export culture in Brazil, encouraging the expansion of its agricultural frontier throughout the country. Brazil is the second biggest soya producer around the world, with a 59,8 million ton production in 2008, according to the Instituto Brasileiro de Geografia e Estatística (IBGE), only behind United States. Around the country, the four leading producer states are Mato Grosso, Paraná, Rio Grande do Sul e Goiás. Therefore, geotechnologies may be used to monitor use and soil occupation in various analyzes periods. In this review, the tools are important to illustrate the soya production areas and also the weather behavior around its production evolution in the territory through the years. Its utilization can contribute to the evolution and optimization around real time monitoring of the Agricola cultures, without being necessary to be in the area with a low financial cost. Generally, this information is strongly important for decision makers in both government and private sector, as soon as the achievement information regards the quantification of area, yield and development of agricultural crops are essential to the economic behavior of culture during the season and even beyond. By obtaining data regarding climate crops 2008/09 and 2009/10, held the climatic water balance calculation based on the dynamics of water storage in soil temperature and precipitation data, interpolation of the data through the interpolator (IDW) that generated thematic precipitation maps. Overall, the use of geotechnology to monitor agricultural areas, can strongly contribute to this monitoring, generating raw material for further analysis at low cost

Análise estrutural de treliças espaciais no software Excel utilizando o médodo dos elementos finitos

The following paper means to develop a program to make structural analysis of space trusses. The program to be implemented was based on the concepts of the finite element method and used the programing resources of Visual Basic for Applications (VBA) for the Excel Software®. Being Excel® a software of easy access, low cost, capacity to make matrix calculations and with advanced resources of VBA programing, it is possible to develop an economic solution, efficient and precise for structural analysis of space trusses. Firstly is presented a finite elemento method and the space truss. Then is developed a few important algorithms to be used during the development of the program and also the use of a few resources of VBA. And to validate the quality, efficiency and precision of the results, these are compared with the established commercial software Ansys

Cálculo estrutural de barreiras: Desenvolvimento de um programa computacional de interface online

This study aimed to develop a computer program which systematizes the structural shielding design calculation in diagnostic radiology facilities. For this purpose methodology of the National Council of Radiation Protection and Measurements (NCRP 147[5]) was used. By comparative statistics studies, it was verified if reference parameters values suggested by the US publication correspond to the average national values. The World Wide Web was chosen because of its characteristics as a powerful mean of communication, especially in terms of the wide variety of useful resources and easy access. To compare the reference values of some parameters proposed by NCRP 147 to Brazilian average, studies about the normalized workload per patient, performance of X-ray tube and primary air kerma, unshielded, at one meter from the focal point of the X-ray tube were made. Through this research, relative differences were found. In workload values this differences reached up to 50% in mammography compared to those presented by the NCRP 147; in X-ray tube performance the percentage differences reached 69% in dental radiology, and air kerma results amounted 31% in fluoroscopy. This demonstrates the importance of validation of international protocols to local realities

Análise estrutural e microtectônica da inflexão do jordino e depósitos de ouro associados no greenstone belt de Pilar de Goiás

The study area is included in the geological context of the Goias Median Massif, a region where there are associations of Archean granite-gneiss complex (Block Moquém) and a Paleoproterozoic metavolcano-sedimentary sequence ( Pilar greenstone belt ). At the south of area, the greenstone sequence is partially overlain by Neopreoterozoic metasediments of the Araxá Group. The lithostratigraphic units of the Pilar greenstone belt define a shift from about N30W direction (north of the deposit) to N60 and 70W in the region south of the Jordino deposit, where are truncated by the Araxá Group rocks. Mineralogical associations described in this paper allow to indicate that the regional metamorphism that affected the rocks of the greenstone belt and Araxá Group, in the mapped area, reached the upper greenschist facies (garnet zone). Data obtained during mapping and by microtectonics analysis allow to indicate the existence of at least four deformational events that acted on the rocks of the Guarinos greenstone belt and Araxá Group, represented by the phases called Dn-1, Dn, Dn + 1 and Dn+2. It was observed that the pattern of sulphide porfitoblasts in mineralized levels is similar to garnet, biotite and muscovite porfiroblasts (tardi to post Dn) that marks the metamorphic peak of the area

Caracterização estrutural da mineralização da mina de Fazenda Nova - GO

The study area is includes in the geological context of Arenópolis Magmatic Arc, a region where there are neoproterozoic associations of granodioritic and tonalitic composiotion. (Ortogneisses of the western Goiás) and sequences metavolcanic-sedimentary (Jaupaci Metavolcanic-sedimentary Sequence ). In the mapped area, both units are covered by a cover-laterite. The Ortogneisses from Goiás West consist of a source granodioritic gneisses, corresponding to the Biotite granodiorite gneisse, and also by tonalitic gneiss composition corresponding to Metatonalit. The Jaupaci Metavolcanic-sedimentary Sequence is formed by Chlorite Schist (Metabasalt), Biotite Schist (Metadacite) and Sericite Schist (Metarhyolite), and even intrusions Sin/Tardi e Post Tectonic, granite to diorite composition (Diorites), and alson tonalitic (Bacilandia Tonalite). Post tectonic intrusions are observed, wich were Hornblend Diorite Porphyry and Lamprophyres, Structural analysis allowed the identification of three deformational events, Dn-1, Dn and Post-Dn. The first event is associated with a bygone foliation, lineation which generates an intersectional event, generating the foliation Sn, this being the most important structure in the study area, generating even the type mineral lineation and stretch. The last deformational event is characterized by folds on different scales, affecting the Sn foliation. The rocks of the region have features s active hydrothermal and regional metamorphism, and are composed os assembly indicative of mineralogical facies metamorphism Green Schist, in chlotite zone, with evidence of retro metamorphism. Locally there are sulfides as pyrite, arsenopyrit and pyrhotite, and te mineralization is associated with the arsenopyrite

Caracterização estrutural da Liga Al-1% Si

The aim of this study is to characterize the macrostructure and microstructure of Al - 1%Si alloy obtained in sand and metallic molds. Aluminium has good mechanical properties, but adding silicon, even in small quantities, can change the microstructure and improves mechanical behavior. Workpieces were castings in metallic and sand molds and one can see a difference in their cooling curve, macroscopic and microscopic structures. The sand mold casting has lower cooling rate and so its grains are larger. Due to the lower concentration of grain boundary, the hardness is lower compared to that found in metallic molds, which has smaller grains and a higher hardness. Therefore, it can be concluded that the cooling rate and alloying elements affect the final microstructure of the workpiece

Simulação de contaminação de sedimentos e águas subterrâneas por gasolina e álcool: um estudo de monitoramento de variações das propriedades físico-químicas

Geophysics studies in areas impacted by petroleum derivatives describe abnormalities of both low and high electrical resistivity (the opposite of electrical conductivity), confirmed as contaminant phase by chemical analysis: this contradiction can be explained by degrading processes that naturally occur and create sub products that can change the environment conductivity. Monitoring the variation of the parameters mentioned serves as a comparative basis to the variation in geoelectrical parameters, which identified the correlation between the same contaminant parameters and the difference between their behavior studied apart, as well as its relations with the biodegradation process. The results are applied to the fuel distribution and storage sectors, leading to the diagnosis and monitoring of possible groundwater contamination scenarios, and the knowledge of the area exposure time to the contaminant, besides the better remediation alternative and impacts control. Among some conclusions, the most significant are the decrease in conductivity over time, so as the increase in Eh value in the gasoline contaminated tank, as well as the decrease in the pH value in the second tank with ethanol, which can be attributed to its degradation. Comparing the variations in both tanks, it is evident that Eh, pH and electrical conductivity do not behave temporally in a similar way, although some correlations between Eh and pH can be related.

Integridade dos dados meteorológicos obtidos por duas estações meteorológicas automatizadas

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Monitoramento da condição da ferramenta de dressagem usando sinais de vibração e modelos neurais

Pós-graduação em Engenharia Elétrica - FEB

Expressão, purificação e caracterização estrutural de proteínas codificadas por dois fitovírus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo para correção dos sensores da rede de monitoramento do campo elétrico em função do campo elétrico de tempo bom

A monitoring network of atmospheric electric field covering the Vale do Paraiba region was implemented. The sensors were located on different sites with different altitude and geographic topology. The present work reports the study carried on those sensors in order to verify the necessity of using some correction factor to the measured local electric field intensity due to effects of local environment. The measurements were done in continuous 24 hours per day with the data recorded on registers in each device accumulating information during a period of four months. The relation between the electric field values by each sensor was compared to the reference located on Sao Jose dos Campos city using the same period. In a graphical analysis using the local field intensity and the reference, the data were fitted to a straight line obtained by minimum square method. Variation up to 95% was observed between the field values in some sensors. Another method was proposed, comparing the mean values of the electric field in a function of time. The variation in some sensors reached up to 133%. We conclude that the variations are due to local atmospheric conditions and no correction factor is required on the electric field sensors

Usinabilidade e integridade superficial de implantes dentários

Pós-graduação em Engenharia Mecânica - FEIS

Justiça do capital: violência estrutural nas relações de trabalho dos eletricitários em Minas Gerais

Pós-graduação em Serviço Social - FCHS

Monitoramento do perfil microbiológico de dentes com infecção endodôntica primária durante terapia com diferentes medicações intracanal

Pós-graduação em Odontologia Restauradora - ICT

Caracterização estrutural de substâncias húmicas aquáticas extraídas dos rios Itapanhaú e Ribeira de Iguape

The knowledge of the structure characteristic of the Organic Matter is important for the understanding of the natural process. In this context aquatic humic substances (principal fraction) were isolated from water sample collected from the two distinct rivers, using procedure recommended for International Humic Substances Society and characterized by elemental analysis, electron paramagnetic resonance and nuclear magnetic resonance (13C NMR). The results were interpreted using principal component analysis (PCA) and the statistical analyses showed different in the structural characteristics of the aquatic humic substances studied.