388 resultados para Interface solo-água


Relevância:

30.00% 30.00%

Publicador:

Resumo:

Expansion of agricultural practice, cattle raising and forestry, in a disorderly way and no limits of land use, generates the degradation of natural resources such as soil, water and vegetation. That fact brings consequences, impacts the environment and the rural landscape. This study aimed to identify and quantify the land use in nine watersheds included in the watershed of Faxinal creek, located in western Botucatu, São Paulo State, Brazil, at 22º 51’ 35” and 22º 57’ 02” – Latitude S and 48º 39’ 42” and 48º 38’ 01” – Longitude W. The basin was subdivided into 9 subunits, being eight from second and one from third-order branch. The diagnosis of the subunits was carried out with geospatial technologies, in order to gather data on the use and occupation of the soil. Based on the obtained results, was concluded that the sub watersheds are occupied by the sum of areas of Citrus, horticulture, coffee plantation and small other occupations (25,81%), followed by reforestation (24,80%), as an isolated occupation element, has occupied the largest area.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The misuse of land by man and is causing serious problems to the environment, resulting in ecological imbalance and depletion of natural resources, especially when it comes to areas of permanent preservation, that ecosystems are essential for balance and water conservation importance . Conflicts of land use is a major cause of silting of rivers and water bodies, causing significant losses in soil and decaying natural water resources both in quantity and in quality. Within this scenario, the planning becomes essential for the control of environmental impacts to the environment factor. This study aimed to evaluate land use conflicts in permanent preservation areas of the stream Água Fria watershed, Bofete (SP) using Geographic Information System and satellite image of LANDSAT - 5 of 2010, scale 1:50000. The results show that 51.16% of the permanent preservation areas of the watershed are conflicting, especially for pasture (88.94%) and reforestation with eucalyptus (11.06%). The GIS IDRISI Selva and Cartalinx along with GIS techniques demonstrated speed and efficiency in identifying, measuring and editing maps of land use, preservation and ongoing conflicts in areas of permanent preservation.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

No-till has been used in many different regions of Brazil. However, depending on the location and intensity of machinery traffic, this has caused the problem of soil compaction and many producers are scarification the land as a solution to break through the layer that is restricting plant growth. The objective of this study was to evaluate the influence of scarification (0.30 m) in the physical properties of a dystrophic Alfisol comparing the results with a non-scarified contiguous area; both were previously conducted using no-till. The density and pressure of pre-consolidation were sampled in two areas of non-tillage, one with chiseling (PDCE) and one without (PDSE) by using the UMAS -Mobile Soil Sampling Unit built by NEMPA – Agroforestry Machinery and Tire Testing Center/FCA / UNESP, Botucatu ,SP. The UMAS is equipped with GPS which allows the samples to be georeferenced. The samples were evaluated in the laboratory through the collection of standardized rings. Sampling was performed at a dimension of 15 x 50 m, with 160 rings being collected. The samples containing rings which were used in determining the density and also for testing the consolidometer, were collected from the layers of 0 to 0.10 m, 0.10 to 0.20 m, 0.20 to 0.30 0.30 to I 0.40 m. For the odometer test the undisturbed sample rings were used in obtaining the load bearing capacity of the soil. The soil management adopted provided a decrease in soil density using no-tillage with scarification depths from 0.0 to 0.10 0.10 to 0.20 m while the other depths did not show any decrease. The pre-consolidation pressure in combination with soil aggregate resistance identified that the management process PDCE within all layers was subjected to water content reliability regarding a greater load bearing capacity of the soil. For the PDSE that only was possible in the 0 to 0.10 m, showing greater consolidation of this layer.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Evaluation and adequacy of land occupation in Permanent Preservation Areas (PPAs) are important to ensure quantity and quality of water and local biodiversity. The objective of the study was mapping PPAs according to the Brazilian Forest Code and quantifying land cover and use, establishing the conflict of PPAs occupation in the Ribeirão Lavapés sub watershed. The area is 11,154.58 ha, and is located in Botucatu city, Midwestern region of São Paulo state. For this reason, geoprocessing tools, such as Remote Sensing and the Geographic Information System (SIG) were used. The dominant classes of land use and cover were the Urban Zone in Reverse Cuesta, 4,394.27 ha (39.39%) and Annual Crops in the Peripheral Depression, 3,670.89 ha (39.39%). The mapped area of native forest vegetal cover in the sub watershed was of 1,109.70 ha. Regarding the mapping of PPAs, considering the total area of 1,721.80 ha, a total of 532.15 ha (30.91%) are covered by Riparian Forest and 1,189.65 ha (69.09%) had no native riparian vegetation, therefore, requiring its reforestation.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The objective of this work was to evaluate the sediment production in the initial part of the Pardo River Basin - Botucatu/SP from 1994 to 1999, using the mathematical hydrological model SWAT. It was used topographic maps and satellite data manipulated in GIS using the software SPRING 5.1.6. The simulation of sediment production was generated with the aid of an interface between the hydrological model SWAT 2009 with ArcView ®, version 9.3. The maps of Soil, Land Use and Digital Elevation Model (DEM) were generated in the GIS-SPRING 5.1.6 and exported to ArcSWAT 2009. The tabular data related to the parameters of soil and meteorological parameters were entered directly to the SWAT. The model allowed to estimate the sediment production. A sediment average production rate of 33.866 ton ha-1 over the six years of study was computed in the point of discharge of the basin.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The experiment was conducted in the experimental field of the University of GoiásUEG, UNU Ipameri - GO with the objective of evaluating the effect of different doses of vinasse on the vegetative development of degraded pasture and soil physical properties in two seasons. The pasture used in the experiment was in a state of degradation, and had eight years of formation. The experimental design was randomized blocks consisted of eight treatments and four blocks, totaling 32 experimental units. We evaluated the following soil physical properties: density the soil, particle density, total porosity, infiltration velocity, soil water. We also evaluated the following parameters of vegetative development of grassland: green and dry mass of shoots, effective depth of the root system, the grass height. The results were submitted to analysis of variance at 5% significance level and after we performed regression testing. The vinasse promoted significant effect on all parameters related to vegetative development of both grazing during the rainy season as in the dry. In this case, a model that best fit the dataset vegetative pasture was quadratic. It appeared that the vinasse different doses did not cause changes in the physical properties of the soil.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The electrical measures of the soil have been used as variables that correlate with its characteristics. This study aimed at developing an electrical capacitance sensor of low cost, to evaluate its performance on the field and verify the correlation between the measurements of electrical capacitance with physical properties (sand, silt and clay) and chemical properties of soil (pH, MO, P resin, H + Al, K, Ca, Mg, SB, CTC and V%) and the moisture content. The data sampling was performed at the farm named "Capão da Onça" which belongs to the State University of Ponta Grossa. The samples collection was conducted in an area of approximately 13 hectares, totalizing 81 samples. In each sampling the electrical capacitance of the soil was measured. After the sensor withdrawal, soil samples were collected and sent to be analysed in the laboratory of the College of Agronomics Science of the Paulista State University. The measuring instrument used to collect data on electric capacitance of the soil a digital multimeter was used. The data were submitted to the analysis of correlation and regression. The developed system presented a low cost and it was capable to measuring variation of the electrical capacitance of the soil. The obtained measures satisfactorily correlated with the levels of clay and sand, and weakly with the moisture content. This had demonstrated the possibility to use a sensor to verify the soil texture in not homogeneous areas. The measures of the electrical capacitance of the soil obtained by the sensor had significantly correlated with the soil attributes: calcium, magnesium, pH, SB and CTC. These results had demonstrated the possibility to use a sensor for soil fertility control.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Pós-graduação em Agronegócio e Desenvolvimento - Tupã

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This study aims to develop a computer program based on VBA programming language, using Microsoft Excel, for designing pumping systems of water. The program allows the user to determine the economical diameter, using the equation of Bresse, for a given installation, since the geometric elevation, the material of the tube, the accessories along the line and the volumetric flow are known. In addition, the program estimates the total annual cost of the installation for three different diameters, in order to compare which diameter is more advantageous from an economical perspective. The program interface is designed to be simple and intuitive with the intention of being didactic and offering to engineering students an advantageous tool to analyze this type of project. Microsoft Excel was chosen for this work because is present in virtually all personal computer, and is an indispensable tool for educational purposes

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Ciência do Solo) - FCAV