Produção e qualidade da cana-de-açúcar em diferentes formas do relevo

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Comparação de métodos para extração de dna na reação em cadeia da polimerase para detecção de Salmonella enterica sorovar enteritidis em produtos avícolas

The identification of Salmonella spp. in food samples by microbiological diagnosis is time consuming, with approximately five different stages, requiring about 120 hours until the final result. The utilization of the polymerase chain reaction technique (PCR) can reduce this time, but substances present in samples may affect the reaction. The present work aimed to compare DNA extraction by thermic treatment and by the use of cetyltrimethil ammonium bromide (CTAB), in products originated from poultry houses corresponding to raw material (meat meal) and experimentally contaminated drag swabs. Materials obtained from the extractions were submitted to PCR, utilizing a pair of initiator oligonucleotides for amplification of Sdf 1 gene fragments. Comparing the methods of extraction, it was observed that when CTAB was employed, SE was detected in 70% of meat meal and in 80% of drag swabs, while the thermic treatment method yielded positive results in 20% of meat meal and in 40% of drag swabs. SE was detected under both methods utilized for DNA extraction, but the use of CTAB detected a greater number of positive samples, compared with thermal treatment.

Orange and mango byproducts: agro-industrial waste as source of bioactive compounds and botanical versus commercial description: a review

Vegetal origin agro-industrial wastes are seen as a problem since the beginning of the industrial processes; however, they are becoming attractive as raw material for numerous purposes such as active enzymes and in the molecule bioprospecting area. Moreover, it is difficult to understand what the studied residue is consisted of in studies on agro-industrial waste, since the wastes names and constituents may vary according to the used equipment, as for waste from orange and mango processing. Thus, defining a specific waste, including comparisons between botanical and industrial descriptions, can help in understanding studies about wastes. The current review sought to contextualize such a scenario by gathering definitions, relevant information and studies on agro-industrial wastes and by-products, international enzymes market, and recent studies on bioactive compounds. In this context, waste from orange and mango are interesting because of the expression of these fruits on the world market; moreover, the processing does not include steps that could disrupt these biomolecules.

Comparação do custo de produção do crambe (Cambe abyssinica Hochst) com outras culturas oleaginosas em sistema de plantio direto

Biodiesel is a reality in Brazil, due to the National Program of Biodiesel Production and Use (PNPB), which became mandatory in 2008 in adding 2% biodiesel in all diesel sold in a blend known as B2. The agribusiness sector responded to the federal program, facing many difficulties in biodiesel production, which highlights the supply of raw material. Problems related to biodiesel production were mainly the shortage of vegetable oil, because of demand from domestic and foreign markets, and rising prices of raw materials available for production, making this biofuel production economically feasible, even in Brazil, where agricultural production costs are among the most competitive in the world. The crambe is a specie that has aroused the interest of Brazilian producers due to oil content, hardiness, and mechanized cultivation, mainly for being a winter crop, it becomes one more option for farmers in this period. In addition, you can compose systems of crop rotation as well as being used as ground cover in winter. The aim of this study was to evaluate the potential for productive and cost of production of crambe, conducted in no-tillage system, to compare these parameters with other oil crops such as sunflower, canola and soybean. The trial was conducted in the agricultural year 2008 at the Experimental Farm Lageado belonging to the Faculty of Agronomic Sciences - UNESP, located in Botucatu - SP. The estimated yield was 1.507,05 kg ha-1, resulting in a production of 561,94 liters of oil per hectare. The cost of installation and conduct of crambe per hectare was R$ 875,87, resulting in a cost of R$ 1,56 per liter of oil, the lowest cost among the oilseed crops analyzed.

Ocorrências e usos do Tucumã (astrocaryum vulgare mart) em comunidades ribeirinhas, quilombolas e de agricultores tradicionais no município de Irituia, Pará

The aim of the study is to demonstrate the occurrence and usage of the Tucumã (Astrocaryum vulgare Mart.) in rural areas of the Municipality of Irituia, in the State of Pará (Brazil), since the use of the palm part of the traditional culture of communities of farmers, riparian and quilombola, used in curing diseases in human and domestic animals, building shelters, obtaining fibers, production of tools and crafts, hunting and fishing. In addition to the uses reported by the population, tucumã has potential for the production of oil and biodiesel. In this sense, the Federal University of Pará – UFPA, in a partnership with the Irituia’s Municipal Government, is studying the implementation of an oleaginous processing plant in the municipality, among them, and includes the Tucumã as a potential source. Such proposal stipulates the production in the agroforestry system, as an alternative to the slash and burn agriculture in the region, reconciling environmental conservation with territorial rural development. Considering the results obtained in the field, it has been found an average of 9.4 stumps per hectare, each stump having 7.7 stipes and 4.7 racemes with up to 146 fruits. If all the Tucumã’s stumps were kept until they reached their average productivity capacity, it is estimated that the fruit production in the rural area of the municipality would be around 132.060 tons, which could produce up to 12.665,4 tons/year of pulp oil and 4.768,4 tons/year of nut oil, confirming the supply of raw material to move this productive chain.

Eficiência da calda bordaleza e sulfocálcica em diferentes concentrações e idade de planta no controle de doenças foliares de maracujá-doce em cultivo orgânico

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Cana-de-açúcar e álcool combustível: histórico, sustentabilidade e segurança energética

The cane sugar is important since the early days in the history of the country, following the discovery of Brazil since the colonial period, therefore, the culture has an important role in the Brazilian economy, being one of the main products. In the 1970s with the advent of the economic crisis, geopolitical and the possibility of depletion of oil, countries dependent on imported fuel, sought new energy alternatives. In Brazil, it was decreed in 1975 the creation of the National Alcohol Program - PROALCOOL, who had several years of rising, the increase of distilleries and marketing of cars powered with ethanol blend. Due to the decrease in the price of oil the importance of the program significantly reduced, returning to peak only in 1979, ie, the second phase of the program. Conceived as one of the vectors of the national response to the crisis in oil prices '70s, the program persisted at times rising in others not reaching for more than three decades. Brazil is the second largest ethanol producer, second only to the U.S., where the raw material comes from corn, which becomes a bottleneck biodiesel production because it competes with food production. New technologies developed to increase ethanol production combined with sustainability and economic viability are being held, the principal is the second generation ethanol, known as cellulosic ethanol, ethanol plus third and fourth generation.

Composição química e propriedades de pasta de farinhas de mandioca

This work aimed to analyze the chemical composition and paste properties of cassava flours, from several producers and classifications, marked in different Brazilian cities. Flours were characterized to moisture, ash, fibers, protein, lipids, total sugars and starch. The paste properties were analyzed in RVA. The results showed significant differences to chemical components in cassava flours. The moisture ranged from 4.39 to 10.26, starch (82.19 to 88.90%), ash (0.48 to 1.07%), fiber (3.23 to 6.41%), protein (1.15 to 2.13%), total sugar (0.05 to 0.56%) and lipids (0.40 to 1.24). These differences can be due the variations of raw material and process. The paste properties of flours were different, with viscosity peak ranged from 73.33 to 387.08 RVU, breakdown (2.42 to 248.83RVU, final viscosity (154.92 to 275.5 RVU) and retrogradation tendency (50.75 to 132.5 RVU), showing the influence of kind of processing on flour viscosity.

Composição físico-química e propriedades tecnológicas da farinha de folhas de mandioca

Cassava leaves can be considered an important nutritional source when compared to other commonly consumed vegetables leaves. Cassava leaves have high levels of protein, fiber and minerals, and arestill underexplored due to the lack of information regarding the use of them as afood product, as well as, their use as an industrial raw material. The consumption of cassava leaves in fresh form is impractical due to the presence of cyanide, thereby it is required a pretreatment to be performed to reduce this component. The objective of this study was to produce and characterize the four made with cassava leaves as its chemical composition, color, indices of absorption and water solubility, and pasting properties, aiming to provide information of interest for possible application as an ingredient in the food industry. Cassava leaf flour showed low moisture content (6.6 %)and significant amounts of fiber (30.68 %), protein (23.00 %), and total carbohydrate (22.27%). Drying and milling processes allowed to obtain a flour with a low content of total cyanide (0.3 mg 100g-1 ), and the presence of vitamin C (56.6 mg 100g-1 ) and β –carotene (38 mg 100g- 1 ). The color analysis of cassava leaf flour showed low lightness with, predominantly, green and yellow pigments. The cassava leaf flour presented good solubility (14.85 %) and water absorption (6.87 g gel. g-1 ). Pasting properties showed a low peak of viscosity and a higher final viscosity with a retrogradation tendency, indicating a low capacity of this flour to form gel. The flour of cassava leaves can be a good source of nutrition when used as a food ingredient in soups and pasta. However, it is not indicated to products that require high gel formation.

Propriedades de pasta e térmicas de misturas instantâneas de farinha de soja, fécula e farelo de mandioca

The application of extrusion technology in the food industry has enabled the development of new commercial products of fast preparation, and maintaining the nutritional characteristics after the process. During this process there are changes in raw material due to the action of temperature, humidity and mechanical friction resulting in a modified product which can be used in various industrial applications. This work aimed to evaluate the effect of the composition of the raw material and operating conditions of the extrusion process on the properties of paste and thermal properties in the development of a functional instant flour of cassava and soybean. The results showed significant effects of all operating parameters on the rheological properties studied. The extruded flours showed no residual gelatinization enthalpy, suggesting that the starch in the samples was gelatinized. The experimental conditions of the smallest percentages of cassava residue (10%) and high soybean flour (25%) mixed with cassava starch, extrusion temperature of 75ºC and low screw speed (170rpm) leads to obtain instant flour with desirable characteristics.

Production of alcoholic beverage from ginger: study of fermentation process and final product quality

Introduction: In Brazil part of the production of ginger is of inadequate quality for export. The production of spirit from felt-over rhizomes is an alternative of great interest to producers of these rhizomes. Aim: Aiming to increase the value of felt-over rhizomes, this work aimed to study the use of ginger as a raw material for alcoholic beverage production. It was evaluated the effect of fermentation conditions on the components of fermented alcoholic, as well as, the quality of alcoholic distilled beverage of ginger. Methods: Dehydrated ginger passed by enzymatic hydrolysis-saccharification processes. The hydrolysate obtained was analyzed for sugar profile in HPLC. The alcoholic fermentation process followed the central composite rotational design for three factors: fermentation temperature (23 to 37ºC), time of fermentation (17 to 33 h) and concentration of inoculum (0.22 to 3.00%). The fermented alcoholic obtained was analyzed in HPLC for the contents of ethanol, methanol, glycerol and residual sugars. The distillated alcoholic beverage of ginger was analyzed for ethanol, methanol, acetaldehyde, ethyl acetate and higher alcohols in the gas chromatography (GC). In addition, copper content and acidity were analyzed Results: Sugar profile of the ginger hydrolysate revealed the presence of 77.8% of glucose. Data analysis of fermentation process showed influence of temperature on ethanol and methanol content of the fermented alcoholic of ginger. Time of fermentation had effect on glycerol content. All parameters of process had influence on residual sugars contents. The HPLC analysis has shown presence of methanol, ethyl acetate, aldehyde, acids, higher alcohols and esters in distilled alcoholic beverage of ginger. Conclusion: Fermented alcoholic of ginger with higher levels of ethanol can be obtained under the conditions of 1.5% w/w of inoculum, 30°C of temperature and 24 hours of fermentation time. In this condition of fermentation process the beverage of ginger had good quality.

Tratamento de caldo e tipos de fermentos sobre os componentes secundários e qualidade da cachaça de alambique

Pós-graduação em Microbiologia Agropecuária - FCAV

Grupo de apoiadores e cooperlix em Presidente Prudente-SP, Brasil: modelo e evolução de suas relações durante quinze anos

Pós-graduação em Geografia - FCT

Produção de amilases de Rhizopus microsporus var. oligosporus e hidrólise enzimática do bagaço de mandioca visando a produção de etanol por Saccharomyces cerevisiae

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo comparativo para fabricação de peças aeronáuticas: forjamento x usinagem

This paper shows a technical-economic analysis of the substitution of raw material machined metal parts for a forged preform. At the end, it shows that the economic gain by the machining process substitution for a forged preform is significant for the samples analysed