Degree of conversion and hardness of two different systems of the vitrebond™ glass ionomer cement light cured with blue LED

This study investigated the physicochemical properties of the new formulation of the glass ionomer cements through hardness test and degree of conversion by infrared spectroscopy (FTIR). Forty specimens (n = 40) were made in a metallic mold (4 mm diameter × 2 mm thickness) with two resin-modified glass ionomer cements, Vitrebond™ and Vitrebond™ Plus (3M/ ESPE). Each specimen was light cured with blue LED with power density of 500 mW/cm2during 30 s. Immediately after light curing, 24h, 48h and 7 days the hardness and degree of conversion was determined. The Vickers hardness was performed by the MMT-3 microhardness tester using load of 50 gm force for 30 seconds. For degree of conversion, the specimens were pulverized, pressed with KBr and analyzed with FT-IR (Nexus 470). The statistical analysis of the data by ANOVA showed that the Vitrebond™ and Vitrebond™ Plus were no difference significant between the same storage times (p > 0.05). For degree of conversion, the Vitrebond™ and Vitrebond™ Plus were statistically different in all storage times after light curing. The Vitrebond™ showed higher values than Vitrebond™ Plus (p < 0.05). The performance of Vitrebond™ had greater results for degree of conversion than Vitrebond™ Plus. The correlation between hardness and degree of conversion was no evidence in this study.

ZnO nanostructures directly grown on paper and bacterial cellulose substrates without any surface modification layer

In this report, hierarchical ZnO nano- and microstructures were directly grown for the first time on a bacterial cellulose substrate and on two additional different papers by hydrothermal synthesis without any surface modification layer. Compactness and smoothness of the substrates are two important parameters that allow the growth of oriented structures. © 2013 The Royal Society of Chemistry.

Role of acidic and basic electrolytes on the structure and morphology of cathodically reduced indium tin oxide (ITO) substrates

In this report we track the structural changes suffered by ITO along galvanostatic polarization at different current densities by X-ray diffraction and SEM micrographs. The XRD shown that cathodic treatment induces structural change in ITO, characterized by appearing peaks set distinct from ITO original structure associated to metallic phase of the solid solution of In-Sn. It is interesting to note that although the different ions present in the solution are not, at least to a noticeable degree, incorporated in the metallic phase, the SEM images show that they do influence its formation, pointing to some type of adsorptive mechanism of the inert ions during the lateral diffusion of the metallic ions. © 2013 Elsevier Ltd. All rights reserved.

The impact of hydrofluoric acid etching followed by unfilled resin on the biaxial strength of a glass-ceramic

Objectives: To evaluate the null hypotheses that hydrofluoric (HF) acid etching time would neither decrease the biaxial flexural strength of a glass-based veneering ceramic nor enhance it after silane and unfilled resin (UR) applications. Methods: Disc-shaped IPS e.max ZirPress specimens were allocated into 12 groups: G1-control (no-etching), G2-30 s, G3-60 s, G4-90 s, G5-120 s, G6-60 s + 60 s. Groups (G7-G12) were treated in the same fashion as G1-G6, but followed by silane and UR applications. Surface morphology and roughness (Ra and Rq) of the ceramics were assessed by means of scanning electron microscopy (SEM) and profilometry, respectively. Flexural strength was determined by biaxial testing. Data were analyzed by two-way ANOVA and the Sidak test (α = 0.05). Weibull statistics were estimated and finite element analysis (FEA) was carried out to verify the stress concentration end areas of fracture. Results: The interaction (etching time vs. surface treatment) was significant for Ra (p = 0.008) and Rq (0.0075). Resin-treated groups presented significantly lower Ra and Rq than non-treated groups, except for the 60 s group (p < 0.005). SEM revealed that etching affected the ceramic microstructure and that the UR was able to penetrate into the irregularities. A significant effect of etching time (p = 0.029) on flexural strength was seen. G7-G12 presented higher strength than G1-G6 (p < 0.0001). None of experimental groups failed to show 95% confidence intervals of σ 0 and m overlapped. FEA showed lower stress concentration after resin treatment. Significance: HF acid etching time did not show a damaging effect on the ceramic flexural strength. Moreover, the flexural strength could be enhanced after UR treatment. © 2013 Academy of Dental Materials.

Luminescence quantum efficiency at 1.5 μm of Er3+-doped tellurite glass determined by thermal lens spectroscopy

Erbium doped tellurite glasses (TeO2 + Li2O + TiO2) were prepared by conventional melt-quenching method to study the influence of the Er3+ concentration on the luminescence quantum efficiency (η) at 1.5 μm. Absorption and luminescence data were used to characterize the samples, and the η parameter was measured using the well-known thermal lens spectroscopy. For low Er3+ concentration, the measured values are around 76%, and the concentration behavior of η shows Er-Er and Er-OH- interactions, which agreed with the measured lifetime values. © 2013 Elsevier B.V. All rights reserved.

Efeito da privação de ninho sobre a agressividade e o sucesso de acasalamento em machos de tilápia do Nilo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Uma contribuição para o estudo da estrutura de bandas de energia em filmes finos de 'SNO IND.2'

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Investigação da temperatura eletrônica da fase plasma e estudo da morfologia, estrutura molecular e crescimento do polímero proveniente de um plasma de benzeno excitado por tensão contínua

Pós-graduação em Física - FEG

Hibridos siloxano-polímero no comportamento hidrofilico de diferentes materiais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desenvolvimento de critérios para seleção de adesivos utilizados na fabricação de pás de turbinas eólicas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cornitermes cumulans Kollar, 1832 (Isoptera: termitidae ): preferência a diferentes substratos e avaliação de danos em plantas de Eucalipto

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência da adição de bioactive glass na liberação de íons do cimento de ionômero de vidro modificado por resina

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Materiais multifuncionais baseados em celulose bacteriana

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Preparação e caracterização de derivados celulósicos obtidos a partir da celulose bacteriana e obtenção de filmes para aplicações óticas

Pós-graduação em Química - IQ

Alternative substrates in the production of lettuce seedlings and their productivity in the field

Based on the hypothesis that alternative substrates should improve the yield of lettuce crops by producing better quality seedlings, the objective of this work was to evaluate the effect of different substrates on the production of seedlings of this species, and their growth in the field. The study was in two stages. The first consisted of the production of lettuce seedlings, and the second assessed their development in the field. Four alternative substrates were tested, obtained by mixing together a sieved vermicompost from which all clumps had been removed, sterilized sand, charred rice husks and basalt powder. The commercial substrate, Plantmax HA®, was also tested. In the first phase, which was conducted in a completely randomised design with four replications, the height, root length, number of leaves, leaf area and dry weight of the seedlings were all evaluated 28 days after sowing. In the second phase, which was carried out in the field in a randomised block design with four replications, the plants were harvested 50 days after transplanting and the head diameter, fresh weight, number of leaves and leaf and stem dry weight were evaluated. The alternative substrates produced larger seedlings in less time than the commercial substrate, resulting in a reduction of 10 days in the total crop cycle. The reduction in the time between sowing and harvesting, together with those aspects relating to sustainability, are the main advantages of the use of alternative substrates, since in the field crop production did not differ between treatments.