Criopreservação de oócitos de Prochilodus lineatus (Valenciennes, 1836) (Teleostei, Prochilodontidae)

Pós-graduação em Ciência e Tecnologia Animal - FEIS

Utilização de resíduos de tratamento de esgoto como suprimento hídrico e nutricional na cultura do girassol

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Biodessulfurização do biogás gerado no processo de digestão anaeróbia da estação de tratamento de efluentes de uma indústria cervejeira

Pós-graduação em Química - IQ

Desenvolvimento, implantação e avaliação do desempenho de biorreator anaeróbico de leito fluidizado e leito fixo com filtros biológicos em materiais diversos

This study aimed to develop, implement and evaluate the performance of a new type of bioreactor for anaerobic treatment of wastewater using different filling materials like trickling filters post-reactor. This bioreactor has mixed characteristics of the UASB reactors and horizontal flow from the point of view of removal of BOD (Biochemical Oxygen Demand) ssed (settled solids), TS (Total Solids), SS (Suspended Solid), SD (Dissolved Solids) and turbidity. The experimental model consists of a bioreactor with a volume of 12 m³, 2/3 filled by fluidized bed and 1/3 for fixed. The fluidized bed is made of polystyrene plates used as a system percolation and compartmentalized trickling filters, where each compartment was filled with a support medium with different characteristics (gravel number 4, plastic rings of polystyrene, PET and HDPE) . In addition, the output of a filter system was installed three entries filled with activated carbon. The bioreactor was installed in private residence in the city of Igarapava-SP (20° 02'40.18"S and 47° 45'01.36" W). The system was highly efficient as the removal of organic contaminant load 92% on average reducing the BOD, a significant result when compared to other anaerobic systems. For the other parameters, the mean reduction was 96% for turbidity, 99% ssed, 67.5% ST, 57% SD and 88% of SS. As for its operation the system was capable of operating in continuous flow without the need for maintenance during the entire period of evaluation and without energy, as it operates taking advantage of the natural slope of the terrain where it is installed. The environmental impacts were minimized due to the preservation of local vegetation allowing the ecosystem to remain unchanged beyond the prototype was completely sealed preventing exhalation of odors and therefore not causing inconvenience to neighboring populations. Given these facts it was concluded that the prototype is shown to be highly feasible deployed as a new alternative for treatment of sewage in rural and urban settings (individual homes, condos, farms, ranches, etc.) Due to ease of design and operability, and sustainability at all stages of execution.

COD, TSS, nutrients and coliforms removals in UASB reactors in two stages treating swine wastewater

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Co-digestão anaeróbia de resíduos vegetais e águas residuárias de suinocultura em reatores horizontais de leito fixo e alta taxa

Pós-graduação em Microbiologia Agropecuária - FCAV

Chromium in soil organic matter and cowpea after four consecutive annual applications of composted tannery sludge

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Reator anaeróbio compartimentado para o tratamento de águas residuárias de suinocultura

Water and soil pollution caused by the waste from the swine production causes severe environmental impacts in producing areas. An efficient alternative to reduce these impacts can be the use of high-rate anaerobic reactors. In this work, it was evaluated the effect of the swine wastewater with total suspended solids concentrations around 6.000 mg.L-1 in the anaerobic baffled reactor with three compartments. The volume of the first compartment was 210 L and of the second and third ones of 160 L. The anaerobic baffled reactor was submitted at hydraulic detention times of 56, 28 and 18 hours and to organic load rates of 5.0 to 10.1 g total COD (L.d)(-1). The highest total COD removals, of 42 to 68%, and volumetric methane productions, of 0.261 to 0.454 L CH4 (L reactor d)(-1), occurred in the second compartment.

Evaluation of the bleached human enamel by scanning electron microscopy

Since bleaching has become a popular procedure, the effect of peroxides on dental hard tissues is of great interest in research. Purpose: The aim of this in vitro study was to perform a qualitative analysis of the human enamel after the application of in-office bleaching agents, using Scanning Electron Microscopy (SEM). Materials and Methods: Twenty intact human third molars extracted for orthodontic reasons were randomly divided into four groups (n=5) treated as follows: G1- storage in artificial saliva (control group); G2- four 30-minute applications of 35% carbamide peroxide (total exposure: 2h); G3- four 2-hour exposures to 35% carbamide peroxide (total exposure: 8h); G4- two applications of 35% hydrogen peroxide, which was light-activated with halogen lamp at 700mW/cm2 during 7min and remained in contact with enamel for 20min (total exposure: 40min). All bleaching treatments adopted in this study followed the application protocols advised by manufacturers. Evaluation of groups submitted to 35% carbamide peroxide was carried out after two time intervals (30 minutes and 2 hours per session), following the extreme situations recommended by the manufacturer. Specimens were prepared for SEM analysis performing gold sputter coating under vacuum and were examined using 15kV at 500x and 2000x magnification. Results: Morphological alterations on the enamel surface were similarly detected after bleaching with either 35% carbamide peroxide or 35% hydrogen peroxide. Surface porosities were characteristic of an erosive process that took place on human enamel. Depression areas, including the formation of craters, and exposure of enamel rods could also be detected. Conclusion: Bleaching effects on enamel morphology were randomly distributed throughout enamel surface and various degrees of enamel damage could be noticed. Clinical significance: In-office bleaching materials may adversely affect enamel morphology and therefore should be used with caution.

Supressividade a Fusarium oxysporum f. sp. cubense por produtos orgânicos

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Terapia fotodinâmica na Endodontia: emprego de uma estratégia coadjuvante frente à infecção endodôntica

O tratamento endodôntico é de fundamental importância para abolir a infecção nos dentes com necrose pulpar. O sucesso desse tratamento depende: da eliminação eficiente da infecção no sistema de canais radiculares (SCR) e do correto selamento pela obturação dos canais radiculares. Devido à complexidade anatômica do SCR, certas áreas podem ser inacessíveis ao preparo biomecânico (PBM), portanto, o emprego de uma medicação intracanal potencializa a redução dos microrganismos (MO) e seus produtos tóxicos no SCR. Mesmo com o avanço técnico e científico da Endodontia, há MO que ainda sobrevivem ao PBM, sendo os principais responsáveis pela manutenção infecção endodôntica. Assim, novos tratamentos devem ser pesquisados. Com o advento dos aparelhos de laser e LED, surgiram alternativas de tratamentos na área da saúde, como a terapia fotodinâmica (TFD), que é um conjunto de procedimentos físicos, químicos e biológicos, que ocorrem após a administração de um agente fotossensibilizador (FS) ativado por meio de uma luz visível de comprimento de onda específico (laser ou LED) para destruir a célula-alvo, ou auxiliar no combate das infecções. Na Endodontia, foram demonstrados em estudos in vitro e in vivo que o emprego da TFD atua como um coadjuvante e potencializa a desinfecção do SCR, além de ser de fácil aplicação e não promover resistência microbiana. O objetivo da presente revisão é apresentar o estado atual da terapia fotodinâmica em Endodontia.

Reflexos do processamento de cana-de-açúcar bisada na qualidade do açúcar VHP

The aim of this study was to compare the quality of clarifi ed juice and VHP (Very High Purity) sugar produced from “bisada” sugarcane and an early maturation variety, at the beginning of harvest. The experiment was conducted at Usina São Martinho S/A, Pradópolis,SP (Brazil). The process of juice clarifi cation and sugar production was conducted at the Laboratory of Technology of Sugar and Alcohol in the College of Agricultural and Veterinary Sciences at the Universidade Estadual Paulista (FCAV/UNESP), Jaboticabal (SP). The experimental design was randomized, and two varieties were used: SP83-2847 (“bisada” sugarcane) and RB855156 (early maturation), with twelve replications for technological analysis and four replications for sugar production. The clarifi cation process and the clarifi ed juice was evaluated in terms of settling rates, volume of sludge that formed, total soluble solids, pH, turbidity, total phenolic compounds, starch and color. The sugar was characterized regarding the percentage of apparent sugar, color, total phenolic compounds, starch, fi lterability, humidity and safety factor. It was verifi ed that the processing of the juice clarifi cation was not affected by the processing of the “bisada” sugarcane. However, the clarifi ed juice from the SP83-2847 variety had a more intense color and a higher total soluble solids value. The sugar produced from the “bisada” sugarcane presented similar quality to the early maturation variety. It was concluded that the processing of “bisada” sugarcane at the start of the harvest did not affect the juice clarifi cation and resulted in VHP sugar of a quality similar to that of the early maturation variety.

Tratamento de águas residuárias de suinocultura em reatores anaeróbios horizontais de alta taxa seguidos de filtro biológico percolador

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção, imobilização e aplicação de lipase de Fusarium verticillioides

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da utilização de serragem de madeira como adsorvente para o tratamento de efluentes têxteis

The Brazilian textile industry has been a highlight in the global economy. Connected with this high economic performance there is the water consumption and the generation of great volumes of wastewater which present high concentrations of dyes and chemical substances. One of the main techniques used in the treatment of textile effluents is adsorption, which has the activated carbon as the main adsorbent. Recently, studies have been developed to find alternative materials to activated carbon and exhibiting good adsorption capacity of dyes. The aim of this work is to study the potential of sawdust as adsorbent of low cost to remove the dye Direct Green 26. The results of this type of dye removal were obtained through the study of adsorption isotherms obtained by spectrophotometry in the UV-visible region analyzed by the Langmuir model. Finally, a comparison was made of these results with those of other adsorbents. Results showed that the average removal of dye, using sawdust, was 78.8% for an initial concentration of 500mg / L and the maximum adsorption capacity of 119mg / g. These results demonstrate the great potential of sawdust as an adsorbent for the dye Direct Green 26.