Avaliação do comportamento mecânico sob deformação da liga Ti- 30Ta visando aplicações biomédicas

Titanium and its alloys have been used for biomedical applications due their excellent properties such as high corrosion resistance, biocompatibility and mechanical properites. In this study, microstructural and mechanical properties of Ti-30Ta alloy was evaluated during its processing. Ti-30Ta alloy ingots were produced from sheets of commercially pure titanium (99.9%) and tantalum (99.9%). Its melting was realized in arc melting furnace in an argon atmosphere. After homogenizing at 1200ºC, ingots were cold worked by swaging. Samples with 13 mm in diameter were obtained. They were forging at the reduction ratios of 15%. After deformation, microstructure was evaluated by optical microscopy in each condition. Also, Vickers microhardness of samples was measured and phase constitution was evaluated using XRD analysis

Vitrocerâmicas para blindagens balísticas

The use of ceramic materials in ballistic armor is considerable. Such materials can be very harder and lighter than metallic materials commonly used and it presents advantages to replace metallic materials when necessary toughness can be achieved. However, as SiC and Al2O3 ceramic, traditionally used for shielding, still have high manufacturing cost or low density do not have enough to shield applications such as aircraft. An alternative is the glass-ceramics, ceramics obtained by controlled crystallization of glasses, whose properties can be adjusted by choosing the chemical composition of glass, heat treatment of crystallization and special treatments such as ion exchange on the surface, resulting in increased mechanical strength . The objective of this project is to study the kinetics of crystallization of a glass composition based on cordierite (2MgO.2Al2O3.5SiO2), low density and high hardness, for the manufacture of glass-ceramics for ballistic tests. Shown in this report are results of heat treatment of crystallization and characterization by thermal analysis (DSC) glass obtained previously, indicating uneven distribution of crystals, and drying, weighing, mixing of raw materials and a new fusion of glass, the same composition

Estudo da reação de oxidação de metanol sobre fases intermetálicas ordenadas de AuIn, AuSn e AuSb2 em meio alcalino

The present work assessment materials can be used as fuel cells electrocatalysts. The alkaline fuel cell though was less studied, has some advantages compared to the acid configuration. The materials assesment were Au polycrystalline and intermetallics ordered phases of AuIn, AuSn and AuSb2. Your electrocatalytic properties were studied across cyclic voltametry and chronoamperometry techniques in Sodium Hydroxide 0,15M and Metanol 0,15M solution. The results obtained show a more efficiency to intermetallic AuIn as electrocatalyst for the oxidation reaction of methanol in alkaline medium, it showed high levels of current density and on set potential less positive compared to Au polycrystalline. The intermetallic AuSn showed activity just higher concentrations of methanol. Except AuSb2, who represented himself unstable in alkaline media, the intermetallics AuIn and AuSn present a promising future as anode materials for the oxidation in alkaline medium

Mapeamento da ilha da Trindade, Atlântico Sul

The area chosen for this study is the island of Trinidade, which is located 1167 km off the Brazilian coast, in parallel Victory at 20 ° 30'S and 29 º 19'W, being the most easterly point of our continent. The isolation of oceanic island of Trinidade leaves no noticeable that she is part of a large submarine volcanic chain oriented east-west lineament known as Vitória- Trindade. Along with the island of Martin Vaz, who is Federal Territory is administered by the Navy of Brazil. Both correspond to Source alkaline volcanic islands. The area of the island of Trinidad has approximately 10 km2. Geologically consisting ankaratritic spills, spills tannbuschiticos, volcanic tuff spills analcite-ankaratrite, phonolite spills, spills nefelinite, pyroclastics, spills grazinite, tinguaitos, olivine-analcitito, calcarenite dunes and wind according to Almeida (1961). The island has its base on the ocean floor, at 5,800 m depth. It is the only place still recognizes preserved volcanic necks and plugs, as well as remnants of a volcano in Brazil. Magmatism occurred here a sodium alkali-silica subsaturated where his wrist was last 50,000 years according to Almeida (1961). It is a place with restricted access due to their distance from the coast, his contribution and hard to be an exclusive area of the Navy. On the island with peaks occur up to 620 meters high, and its rugged mountainous terrain and difficult access to very specific points, as the peak of Desire, peak Fazendinha, Monument and other points on the island. Because of its location far from the coast, its small infrastructure, difficulty of landing and restricted access by sea, the island of Trinidad offers no possibility of tourism, being a military outpost, and scientific basis of great importance, which conduct research in area of marine biology, oceanography, geology and others

Propriedades físicas de vidros Sb2O3-P2O5

This work presents experimental results of some physical properties of antimony phosphate glasses with compositions (x) Sb2O3 - (1-x) P2O5 (x = 0.75, 0.85, 0.90). Mechanical, thermal, optical and electrical properties were investigated: density, elastic moduli (Young's moduli and Poisson's ratio), Vickers microhardness, coefficient of thermal expansion, glass transition temperature, refractive index and electrical conductivity (for x = 0.75). There was no evidence of electronic conductivity by bipolaron hopping. Measurements of energy dispersive spectroscopy (EDS) showed that volatilization of Sb2O3 takes place during the glass melting

A Gestão de Relações Públicas em culturas organizacionais conflituosas: caso AB InBev

Cultural clashes are part of the intercultural relationships, and especially in the organizations, they cause differences interfering in the process of sharing experiences, expertise and coexistence. This study outlines some communicational actions, built to improve the management of intercultural relations in organizations. This study also is related to the sharing and discussions on the communication planning process and its importance in intercultural differences detained and promoting interfaces between public of “different worlds”. The discussion is supported by theoretical theory of organizations and organizational culture in order to demonstrate a number of aspects related to this subject, which are directly accustomed to public relations activities. It also presents an analysis of the multinational AB InBev, in order to illustrate the process of knowledge and relationships that is built through the construction of the meaning in intercultural environments, as is the case of this organization

A aplicação da teoria do lean seis sigma na prestação de serviços no setor agrícola

This thesis aims to analyze the applicability of Lean Six Sigma and DMAIC to improve processes focused on agriculture. We discuss the origins of each system separately, Lean Manufacturing, the Toyota plants in Japan, and Six Sigma, by Motorola in the U.S., and then appears to merge them and can meet their complementarities and synergy between their tools. Finally, we describe a case study focused on the harvesting department, applicable to all types of manuals crops, covering the production of fruits, vegetables and greens. This study shows the ability to reduce costs, increase productivity and elimination of defects that the methodology developed with the fusion of Lean Manufacturing with Six Sigma allows

Amplificação, clonagem e sequenciamento de promotores de café (Coffea arabica cv Mundo Novo) específicos de fruto e ubíquos

The Coffee Genome Project made available to the scientific community relevant information that made practical the identification and cloning of important genes, as well as the identification of the major sequences involved on their regulation. The aim of the present study was to amplify, clone and sequence coffee promoters with specific expression patterns. For that, coffee ESTs which known expression profiles were employed. First, the promoter regions of coffee genes showing, respectively, fruitspecific and ubiquitous expression were amplified using the Genome Walking strategy. Amplified sequences were then inserted in the pGEM-Teasy vector (Promega) and sequenced. Once completed the sequencing, an expression cassette was constructed using the binary vector pCAMBIA-1381z (Cambia). These expression cassettes were cloned into Agrobacterium tumefaciens, and transgenic tobacco plants were generated aiming the functional characterization of these promoters

Sistema biométrico de identificação de pessoas utilizando poros e minúcias de impressões digitais

The use of physical characteristics for human identification is known as biometrics. Among the many biometrics traits available, the fingerprint is the most widely used. The fingerprint identification is based on the impression patterns, as the pattern of ridges and minutiae, characteristics of first and second levels respectively. The current identification systems use these two levels of fingerprint features due to the low cost of the sensors. However, the recent advances in sensor technology, became possible to use third level features present within the ridges, such as the perspiration pores. Recent studies show that the use of third-level features can increase security and fraud protection in biometric systems, since they are difficult to reproduce. In addition, recent researches have also focused on multibiometrics recognition due to its many advantages. The goal of this research project was to apply fusion techniques for fingerprint recognition in order to combine minutia, ridges and pore-based methods and, thus, provide more robust biometrics recognition systems, and also to develop an automated fingerprint identification system using these three methods of recognition. We evaluated isotropic-based and adaptive-based automatic pore extraction methods, and the fusion of pore-based method with the identification methods based on minutiae and ridges. The experiments were performed on the public database PolyUHRF and showed a reduction of approximately 16% in the EER compared to the best results obtained by the methods individually

Propriedades térnicas de géis e xerogéis híbridos de sílica/orgânico à base de GPTS-TEOS com diferentes concentrações de GPTS

In the present work the thermal characteristics of gels and xerogels of Silica/organic hybrids derived from different concentrations of GPTS-TEOS were investigated by thermal analysis (TG, DTA, and DSC). The preparation of gels of the Silica/organic hybrid matrix was held through the sol-gel process, consisting by the hydrolysis of alkoxides GPTS and TEOS in proportion (1:1) and (1:2) that was promoted in acidic conditions under reflux and stirring at 80oC/2h, producing the matrix in the colloidal state (sol). Gels were prepared by addition of NH4OH to the sol, promoting gelation of sol in sealed plastics containers. Part of the gels samples was analyzed by TG, DTS and DSC techniques in order to characterize water loss and degradation of the polymeric “epoxy” groups present in the structure of the silica derived from the GPTS alkoxide. Another set of samples was dried at 80oC/48h to obtain xerogels (dried gels) and analyzed by the same techniques. We obtained the characteristics temperatures of the matrix by the techniques DTA, DSC and TG, under measurements of thermal analysis until 800oC and 600oC in case of DSC. By thermal analysis (TG, DTA, and DSC) the main endothermic events (loss of water, melting, pyrolysis) and exothermic events (burning of the polymer) of the GPTS-TEOS matrix were determined

Lipidose hepática felina

Feline hepatic lipidosis or fatty liver disease is a cholestatic syndrome that affects domestic cats and is characterized by excess fat accumulation in the liver of cats. Symptoms commonly seen with this syndrome are anorexia, weight loss, lethargy, vomiting, jaundice, and occasionally behavioral or neurologic signs such as excessive drooling, blindness, coma, and seizures. The diagnosis is based on the patient history, clinical examination, complementary examination, and the definitive diagnosis is obtained by cytology and/or histopathology of hepatic tissue. In serum biochemistry, the main findings include increased serum alkaline phosphatase (ALP), alanine aminotransferase (ALT), aspartate amino transferase (AST) and bilirubin. The gamma glutamyl transferase (GGT) is normal or slightly increased. The cornerstone of therapy is aggressive feeding to supply the cat full caloric requirements. Without aggressive nutritional support and intensive monitoring the fatty liver disease can be fatal

Proposta de um dispositivo para ajuste automático da altura de uma cama hospitalar

This paper proposes a mechanical device to adapt a simple model of hospital bed used in the Emergency Department at Santa Casa of Guaratinguetá, allowing the bed’s height adjustment with electromechanical drive. This adaptation aims to introduce improvements in the routine work of nurses and reduce ergonomic problems stemming from repetitive strain during the transfer of patients to stretchers and wheelchairs, as well as providing more comfort to the bedridden patient. The device is mainly composed of: an electric induction motor used to drive the engine, a steel spindle with square thread, which allows axial displacement of the bed, a transmission system with pulleys and belt, which transmits power supplied by the motor to the spindle. The mechanism allows the height of the bed is regulated between 400 and 800 mm. The estimated implementation cost of this proposal is lower than the acquisition cost of a commercial hospital bed with the same features, which confirms the feasibility of the proposed solution

Produção de polpa solúvel a partir de Eucalyptus urograndis

The wood of the gender Eucalyptus occupies a prominence place in relation to other cellulose sources, due to its chemical composition, its low cost, abundance and availability. The dissolving pulp obtaining occurs basically starting from three stages: prehydrolysis of the wood following by cooking and finally by the bleaching process. In the dissolving pulp production is necessary a pretreatment stage for the hemicelluloses removal. Among the chemical cooking processes, the Kraft process is the most used for cellulosic pulps production starting from eucalyptus, in the additive presence or not. The anthraquinone uses in the pulping process has as main purposes increasing the delignification rate as well as protecting the pulp regarding the degradation of the polysaccharide chains. The ECF bleaching process consists of the purification of the pulp through bleaching agents, being excepted the elementary chlorine. The dissolving pulp is a pulp of high a-cellulose content and purity destined to the cellulose derivatives production as carboxymethyl cellulose, nitrocellulose and microcrystalline cellulose. The production of a certain product, as well as its final application, is determined by the chemical properties of the pulp. The present work had as purpose producing cellulosic pulp with kappa number around 9 destined to the production of dissolving pulp in way to evaluate the use of the anthraquinone (AQ) in the Kraft process according to the chemical properties of the obtained pulps. It has been still intended developing an effective technology of bleaching for the high purity and quality dissolving pulp production. The prehydrolysis was accomplished in laboratory rotational autoclave for 30 minutes at 170ºC in the water:wood rate 3,5:1 (L:kg). The Kraft/AQ pulping were accomplished in laboratory rotational autoclave being initially modified the active alkali load (10, 13, 16 and 19%) at sulfidity of 25% ...

Estudo sobre fornos de tratamento térmico e propostas de cogeração de energia em usina siderurgica não integrada

Steel industry is a sector heavily dependent on energy, both electrical and thermal. Since the receipt of raw materials to the shipment of finished products to customers, through mergers, casting, rolling, heat treatment, inspection, among others, high amounts of energy are demanded, generating very significant costs to the productive chain in its entirety . Therefore, any alternative that favors the reduction in energy consumption or barateie the cost of this is very welcome. Within this context, this paper aims to make a technical and economic analysis of installing a cogeneration plant in the field rolling in a non-integrated steel mill. Two configurations are proposed plants, with one being the use of heat from waste gases from furnaces existing in the area mentioned and another with the use of heat from waste gases from an internal combustion engine. Both proposals are evaluated technically and later is done the economic analysis, calculating the financial return (pay back) in relation to the investment required, operation and maintenance of the plant

Estudo das propriedades físicas em materiais vítreos do sistema 50B2O3 - 15CuO - 20Li2O - 15X (X= Na2O, K2O, RbCI e Cs2O)

The increasing demand for devices for solid state applications in many technological areas has resulted in a high demand for new materials. Among these material have the advantage of being manufactured with different chemical compositions, and may have physical properties equal to or higher than the corresponding crystalline material. The aim of this paper was to produce borate glass system 50B2O3 – 15CuO – 20Li2O – 15X (X = Na2O, K2O, RbCl e Cs2O) to analyze the influence of the atomic radius of alkali in the physical properties of this glass system. The glasses were synthesized by the process of melting and molding. The characteristic temperatures were determined by the technique of scanning calorimetry (DSC). The non-crystalline was determined by x-ray diffraction. In order to determine the molar volume a density measurement by using the Archimedes method was used. The structural characterization was carried out using the technique of infrared spectroscopy