Avaliação do enriquecimento aluminoso em perfil laterítico desferruginizado na Chapada Sedimentar do Triângulo Mineiro e potencial econômico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação e monitoramento da obesidade em adultos residentes do município de Rio Claro - SP

Obesity is characterized by an excess of fat on the body and can results several problems on the individual health. As an epidemic of modern times, the prevalence started to increase at an accelerated rate from the 90's in worldwide. Data on the epidemic in Brazil and medium-sized cities are scarce, and the monitoring of obesity is essential for development public policy. So, the objective was to analyze the individual factors associated with obesity such as age, gender, education, marital status, economic class and level of physical activity and make a monitoring of obesity in adults in the city of Rio Claro - SP. To do this, the survey was conducted longitudinally, consists of two times at an interval of seven years. At first (2008) were interviewed 1588 adults in the city of Rio Claro distributed throughout the city. At the second phase (2014/2015) was conducted a new interview with the same subject in 1588. In 2008, personal information collected and applied some questionnaires with the physical activity level, food intake and quality of life. To assess obesity in adults was calculated the body mass index (BMI) proposed by the World Health Organization (WHO) from the high reported weight and height. For older people it used a specific BMI. The prevalence was used percentages and their respective confidence intervals of 95%. For the incidence, was calculated by the formula of cumulative incidence, both stratified by personal characteristics (gender, economic class, education, marital status and age). Thus it was observed that there was an increase in the prevalence of obesity in 2008 (19.0%), increasing to 26.7% in 2015. The cumulative incidence was 14.4% in the range of 7 years. As for the groups, we observed a significant difference between economic class and obesity being less prevalent among people of class D / E. Regarding marital status, it was observed that married / cohabiting have a higher prevalence. Therefore, we can conclude...

Avaliação da erosão hídrica por meio da Equação Universal de Perda de Solo Modificada (MEUPS) na bacia hidrográfica do Ribeirão Jacutinga, Rio Claro (SP)

Water erosion is one of the main processes responsible for soil degradation, resulting in loss of parcels of land suitable for agriculture, to the loss of agricultural inputs and the resulting drift of pesticides and excess sediment to rivers, causing phenomena such as the siltation and eutrophication of water bodies. Such a scenario makes it necessary to perform work of a technical and scientific to provide subsidies to land-use planning, in order to protect natural resources biotic and abiotic. To develop this work is necessary to find a unit of analysis capable of integrating the different elements of the landscape, hydrosphere, atmosphere, biosphere and lithosphere. Therefore we adopt for this work the watershed as main unit studies. From this question, this project will focus on the assessment of surface water erosion through MEUPS (Equation Modified Universal Soil Loss) predictive model. With the aid of maps, remote sensing products, and the use of geotechnology, this study aims to evaluate for the for Natural Erosion Potential the basin of the Jacutinga river, located in Rio Claro - SP

O curso Normal Superior do Instituto Superior de Educação de Garça e aspectos da história da formação de professores no Brasil (2003-2007)

Pós-graduação em Educação - FFC

Do acolhimento ao acompanhamento compartilhado: a construção colaborativa de uma proposta para o estágio curricular no curso de pedagogia

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação do potencial citotóxico, genotóxico e mutagênico da melitina em cultura de células

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação da resistência à corrosão da liga Ti-30Ta submetida a diferentes taxas de deformação visando aplicações biomédicas

This study aims to evaluate the corrosion resistance of Ti-30Ta alloy when subjected to different strain rates. Samples of the alloy Ti-30Ta were obtained from the melting of pure elements in the arc furnace in inert atmosphere (argon gas). Then, the samples were subjected to a thermal treatment and to cold worked to obtain bars. After forging, the samples were machined in accordance with ASTME9-09 standard for carried out compression tests. To microstructural characterization, samples were sectioned longitudinal and transversally and embedded in resin. After, the wet sanding and polishing were performed, followed by a chemical attack, in order to study the microstructure under an optical microscope. Microhardness was measured on the samples that were subjected to microstructural characterization by using microhardness tester. Phases were evaluated by x-rays diffraction. Corrosion tests were carried out to evaluate the influence of deformation on the corrosion resistance. Results show that microstructure was not influenced by deformation

A Avaliação na sala de aula de matemática: práticas e concepções

This research aims to understand the assessment practices used by teachers at a public state school in the city of Cunha, Sao Paulo. To this end, we interviewed five mathematics teachers, who answered a questionnaire with five questions. The responses were analyzed according to the rigor of phenomenological research. To understand the investigation region, that is to say, the meaning of evaluation, we proceeded to a review of studies on the subject in authors like Buriasco (2002), Pavanello (2006), Hoffmann (1994), expressive in Mathematics Education that allows us to explain the concept of prevailing interpretation in the area. The phenomenological analysis enabled the development of three categories open revealing the concept of evaluation of teachers investigated. The first shows the review As a way to measure the knowledge acquired by the student. His interpretation leads us to understand that for some teachers, the research subjects, the assessment becomes a method to ' measure ' the knowledge acquired by the student. The second category, expressed by As a way of understanding the student's behavior in class, shows that some of the interviewees understand the evaluation as a medium that reveals and appreciates the ways of the student behave in class. Finally, the third category refers to the evaluation by means of said instruments. On this subject the claim that the assessment is through instruments such that: evidence, exercise lists, among others. In summary, interviews and categories analyzed explain the ways in which the assessment reveals the concept of implicit learning the instruments used in the evaluation practices of teachers interviewed. However, the authors read, evaluation is a necessary and permanent teaching job in teaching, which must follow step by step the process of teaching and learning. It follows, ... (Complete abstract click electronic access below)

Análise envoltória de dados combinada com a lógica fuzzy em problemas de avaliação de eficiência de máquinas de consumo: um estudo em empresa do segmento farmacêutico

The pharmaceutical industry was consolidated in Brazil in the 1930s, and since then has become increasingly competitive. Therefore the implementation of the Toyota Production System, which aims to lean production, has become common among companies in the segment. The main efficiency indicator currently used is the Overall Equipment Effectiveness (OEE). This paper intends to, using the fuzzy model DEA-BCC, analyze the efficiency of the production lines of a pharmaceutical company in the Paraíba Valley, compare the values obtained by the model with those calculated by the OEE, identify the most sensitive machines to variation in the data input and develop a ranking of effectiveness between the consumer machinery. After the development, it is shown that the accuracy of the relationship between the two methods is approximately 57% and the line considered the most effective by the Toyota Production System is not the same as the one found by this paper

Avaliação das causas e consequências das patologias dos sistemas impermeabilizantes: um estudo de caso

This work aims to assess a case ofwaterproofing pathology, from the presentation of the pathological manifestations, thecharacterization and quantification of negotiationsproposals. With these data, graphs were elaborated with thepurpose ofemphasizing the cost increase from the time of intervention, to give an increase of 1,429.00 % inthe presented study. Also show the proportion of spending on finishes and waterproofing,demonstratingthe greatinfluence of the finishes in the composition of the treatment costs. Inthisstudy, it was foundthat these finishes made up89% of the total cost. In the bibliographic reference, presented to the active mechanisms, the characterization of waterproofing systems and the most common pathologies. It follows the importance of sealing to ensure integrity of a construction

Programação por metas e análise envoltória de dados na avaliação de unidades de produção global: uma aplicação em uma empresa do segmento químico

Considering the high competitivity in the market, the application of quantitative methods can assist in analyzing the efficiency of production facilities of areas of export and import processes of the chemical industry sector. In this sense, this work aims to apply the model GPDEA-BCC optimization in order to develop an analysis of the production units of this chemical industry. So, were chosen variables relevant to the process and elaborated a final comparison between the results obtained by the optimization tool and performance indexes provided by the company. These results indicated that some production units should be monitored more carefully because some of them had a low efficiency when analyzed with multi criteria

Aplicação do valor presente ajustado (APV) para avaliação do fluxo de caixa de uma empresa do setor automotivo no sistema inovar auto

The automobile industry shows relevance inside the Brazilian industrial scenario since it contributes with the development of a significant chain of supply, distributors, workshops, publicity agencies and insurance companies in the internal market, aside from being one of the five biggest worldwide market. Thereby, the federal government decreed in Dec, 17th 2012 by Law nº 12.715 the Inovar-Auto Program. As the Adjusted Present Value (APV) is highly recommended, although not yet widespread to public politics of tax reduction, this work intends to apply the APV method on the cash flow analysis of an automobile sector's company, which has recently installed in national territory and wants to rely with governmental incentives proposed by Inovar-Auto Program. The developed work evaluates the company's current cash flow stochastically from mathematical modeling of variables such as price, demand and interest rate through probability distributions with the assist of Crystal Ball software, a Microsoft Excel Add-in, generating different scenarios from Monte Carlo Simulation. As results probabilities situations have been evaluated until the end of the Inovar-Auto's conducted period, in 2017. Beside APV others indicator such as Internal Rate of Return (IRR) and payback period were estimated for the investment project. For APV a sampling distribution with only 0.057% of risk, IRR of 29% were obtained and estimated project payback period was 4.13 years

Avaliação de lubrificantes para aplicação em componentes mecânicos pelo método de compressão do anel

The current lubricants are getting better with advancing technology and more specific to each case of application. Its use is directly linked to the level of waste by friction generated between objects in direct contact and it is essential to promote greater durability of mechanical components. This study refers to behavioral assessment of some types of lubricants and rank among them which one presents the lowest friction between metal components. For this work, will be used the method of ring compression test (RCT), after performed tests and analyzed the results, will be possible to report which lubricant will bring the best reduction in friction. The need for this work was given initially by the observation that some mechanical projects developed at FEG does not conduct in-depth studies the lubricants used. Therefore this study aims to provide better support to these projects. In this work were used five different lubricants, three oils and two greases.

Avaliação da rigidez torcional do chassi de um protótipo Baja SAE através do método de elementos finitos e de ensaio experimental

The torsional stiffness of chassis is one of the most important properties of a vehicle's structure and therefore its measurement is important. For the first time, the torsional stiffness was considered on the design of a prototype Baja SAE of the team from UNESP - FEG, Equipe Piratas do Vale Bardahl. According to the team's opinion, the increase of stiffness on this prototype, called MB1114, made possible a great improvement in its performance during competitions. In this work, the experimental evaluation of the torsional stiffness from this prototype is performed, detailing the analysis of results, as well as, the hysteresis' effect, least-squares regression and uncertainty analysis. It also shows that it is possible to measure the torsional stiffness of chassis with a low experimental uncertainty without expending many resources. The test rig costed R$ 32,50 due the reuse of materials and the use of instrumentation already available on campus. Furthermore, it is simple to produce and can be easily stocked. Those features are important for Baja and Formula SAE teams. Lastly, the measured value is used to validate the finite element analysis performed by the team during this prototype's design, because similar studies will be performed for the new cars. After investigating the finite element analysis, one result 13,5% higher than the measured value was reached. This difference is believed to be occurred due the imperfections of the finite element model, in other words, for not been possible to simulate every phenomena present on the real model

Avaliação do software Autodesk Revit 2016 para quantificação por meio da modelagem da informação da construção

The building budgeting quickly and accurately is a challenge faced by the companies in the sector. The cost estimation process is performed from the quantity takeoff and this process of quantification, historically, through the analysis of the project, scope of work and project information contained in 2D design, text files and spreadsheets. This method, in many cases, present itself flawed, influencing the making management decisions, once it is closely coupled to time and cost management. In this scenario, this work intends to make a critical analysis of conventional process of quantity takeoff, from the quantification through 2D designs, and with the use of the software Autodesk Revit 2016, which uses the concepts of building information modeling for automated quantity takeoff of 3D model construction. It is noted that the 3D modeling process should be aligned with the goals of budgeting. The use of BIM technology programs provides several benefits compared to traditional quantity takeoff process, representing gains in productivity, transparency and assertiveness