Qualidade de mangas cv. palmer após armazenamento sob baixas temperaturas

This study aimed to evaluate the quality of 'Palmer' mangoes previously stored at low temperatures, after their transference to the environmental condition. Fruits harvested at physiological maturity were carefully transported to the Laboratory where they were selected, standardized as the color, size and absence of injuries and treated with fungicide before they were stored at 2°C (75.7% RH), 5°C (73.8% RH) e 12°C (82% RH) for 7, 14 and 21 days. At the end of each period, the fruits were transferred to environmental condition (22.9°C; 62.3% RH), where they were kept for 1, 3, 5 and 7 days, simulating the trading period, and evaluated for the occurrence of injuries and rottenness; peel and pulp color; firmness; contents of soluble solids, titratable acidity and ascorbic acid, as well as, the activities of the enzymes peroxidase, polyphenoloxidase and phenylalanine ammonia-lyase. The results indicated that 'Palmer' mangoes can be stored at 12°C for 21 days without damage to ripening, but with limitations due to the occurrence of decay. The storage at 2°C and 5°C was limited by the occurrence of injuries in the peel, but at the temperature of 2°C these symptoms were more severe and compromised the development of the characteristic color of the peel. However, the ripening of the pulp was not harmed, but this process occurred with less intensity than in mangoes maintained at 12°C.

Rendimento e qualidade de melancia cultivada sob proteção de agrotêxtil combinado com mulching plástico

The ground cover is an agricultural practice that is designed mainly to control weeds, while the nonwoven prevents the attack of pests. The objective of this study was to evaluate the yield and fruit quality of watermelon grown under nonwoven textile protection combined with plastic mulching. The experiment was conducted at the WG Fruits Company, Baraúna, RN. A randomized block design was used in a factorial 3 x 3 + 1 with four replications, and 36 plants per plot, with the first factor of color of plastic used in mulching (black, silver and white) and the second factor nonwoven textile with different times of use (first and third crop nonwoven under textile and without nonwoven) and an absolute control (no mulching and without nonwoven). The production variables evaluated were: yield (commercial, noncommercial, and total fruit yield), and fruit quality (soluble solids - SS, titratable acidity - TA and SS/TA). The use of mulching and protection of plants with nonwoven textile provided a higher yield of watermelon fruits in relation to bare soil with and without nonwoven textile protection. Fruit quality was not affected by the use of mulching and nonwoven.

Uma experiência de corrosão metálica em meio ácido

In this paper it is proposed a method to characterize the corrosion reactions of many metals and alloys in acid media and to evaluate the corrosion rate. An alloy of aluminum and zinc was partially dissolved in HCl solution and the medium acidity decrease was monitored at different time intervals by using a pHmeter. Data analysis and physical chemistry treatment permitted associate the pH increase with the alloy mass loss. This proposal promotes learning of terminology and concepts involved as well as contribute to better understand the corrosion phenomena.

Eficiência de escórias de siderurgia na cultura do feijoeiro em sistema de semeadura direta

In the no till system, soil acidity correction practice is restricted to limestone use and there is little information regarding slag. The study aimed to evaluate the amendments in soil chemical properties, yield and bean nutrient uptake according to the application forms of slags, compared to limestone, in the implantation of no till system. The experiment was conducted in the field at College of Agricultural Sciences, Botucatu (SP) from December 2010 to May2011. The treatments consisted of two application ways of seven soil acidity correctives: steel slag, blast furnace slag, ladle furnace slag, stainless steel slag (agrosilício), wollastonite, lime and calcined dolomite lime, plus one control without corrective application. Each material dose was calculated to raise the base saturation to 70%. Soil acidity was neutralized down to 20cm with limestones, whereas for wollastonite and ladle furnace slag those effects occurred down to 10cm, for steel slag, blast furnace slag and agrosilício the corrective effect was restricted to the first 5cm. The bean yield increased by application of correctives in soil acidity, without differences between the application ways.

Yield and mineral nutrition of soybean, maize, and congo signal grass as affected by limestone and slag

The objective of this work was to evaluate the efficiency of superficial applicationof limestone and slag, and their effects on soil chemical attributes and on yield and mineral nutrition of soybean, maize, and Congo signal grass (Urochloa ruziziensis). The experiment was carried out in a Rhodic Hapludox under no tillage system. The treatments consisted of the use of limestone or slag (silicates of calcium and magnesium) to correct soilacidity, and of a control treatment without the use of soil correctives. Rates were calculated in order to raise soil base saturation up to 70%. Soybean was sown in November 2006and maize in December 2007. Congo signal grass was sown right after the harvests of soybean and maize, and it was cropped during the offseasons. Soil chemical attributes were evaluated at 6, 12, and 18 months after the application of the corrective materials. Slag isan efficient source for soil acidity correction, being able to raise the exchangeable base levels in the soil profile faster than lime. Both limestone and slag increase dry matter yield of Congo signal grass, and grain yield of soybean and maize. Slag is more effective in improving maize grain yield.

Influence of two different vinification procedures on the physicochemical and sensory properties of Brazilian non-Vitis vinifera red wines

The objective of this study was to evaluate the association between the physicochemical properties and sensory acceptance of Brazilian red wines by applying chemometric techniques. Therefore, three winemaking processes were carried out: a traditional winemaking process and two novel winemaking processes, pre-drying and static pomace. Significant differences could be identified amongst the physicochemical properties of the wines (P<0.001). The sensory results showed greater acceptance of the wines made after pre-drying of the grapes or from the static pomace, as compared to commercial brands. Cluster analysis and Multidimensional Scaling were successfully applied and their results demonstrated the influence of the total phenolic content and color indexes on acceptance of the appearance of the wines. The odor was associated with the alcohol content, acidity, dry extract, total and reducing sugars and the body of the wines. The flavor was associated with several physicochemical properties which influenced the overall acceptance of the samples. © 2013 Elsevier Ltd.

Soft-chemical synthesis, characterization and humidity sensing behavior of WO3/TiO2 nanopowders

Tungsten oxide/titania (WO3/TiO2) nanopowders were synthesized by the polymeric precursor method which varied the WO3 content between 0 and 10 mol%. The powders were thermally treated in a conventional furnace and their structural, microstructural and electric properties were evaluated by X-ray diffraction (XRD), Raman spectrometry, N 2 physisorption, NH3 chemisorption, temperature-programmed reduction (TPR), X-ray absorption near-edge spectroscopy (XANES) in situ XANES and extended X-ray absorption fine structure spectroscopy (EXAFS) and transmission electron microscopy (TEM). XRD and Raman spectrometry confirmed the homogeneous distribution of an amorphous WO3 phase in the TiO 2 matrix which stabilized the anatase phase through the generation of [TiO5·V0] or [TiO5·V 0] complex sites. Conventional TPR-H2 (temperature programmed reduction) along with XANES TPR-H2 and XANES TPR-EtOH showed that WO3/TiO2 sample reduction occurs through the formation of these complex clusters. Moreover, the addition of WO3 promoted an increase in the surface acidity of doped samples as revealed by NH3 chemisorption. The WO3/TiO2 bulk-ceramic samples were further used to estimate their potential application in a humidity sensor in the range of 15-85% relative humidity. Probable reasons that lead to the different humidity sensor responses of samples were given based on the structural and surface characterizations. Correlation between the sensing performance of the sensor and its structural features are also discussed. Although all samples responded as a humidity sensor, the W2T sample (2 mol% added WO3) excelled for sensitivity due to the increase in acid sites, optimum mean pore size and pore size distribution. © 2013 Elsevier B.V.

Lodos de esgoto, escória de aciaria e lama cal na cultura da soja sob sistema plantio direto em latossolo vermelho

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aplicação de calcário, silicato e gesso em soqueira de cana-de-açúcar sem despalha a fogo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Adubação mineral, esterco de curral e lodo de esgoto no desenvolvimento inicial do cafeeiro

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aplicação de escória de aciaria e calcário no solo e desenvolvimento do primeiro ciclo da grama bermuda

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Espécies vegetais de cobertura e resíduos industriais e urbanos na cultura da soja em sistema de semeadura direta

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Disponibilidade de fósforo em função da aplicação de calcário e silicatos em solos oxídicos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação de eficiência relativa para a reatividade em silicatos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Resposta de plantas de cobertura a doses de silício e estresse hídrico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)