Um estudo sobre as operações unitárias de agitação, troca de calor em tanques e mistura de pós

De todas as operações, a agitação de fluidos, a troca de calor em tanques e a mistura de pós são, sem dúvida, as mais usuais, principalmente, na indústria de alimentos. Embora exigindo um estudo em separado, é comum estas operações unitárias estarem presentes, em instantes diferentes, no mesmo processo de fabricação. O propósito deste trabalho é enfatizar procedimentos de projeto para problemas práticos nas indústrias de processos envolvendo estas três operações. O modelo matemático proposto para a agitação de fluidos foi aplicado na substituição das tradicionais âncoras por impelidores de pás retas e inclinadas no processamento do suco concentrado de laranja. Observou-se que o tempo de permanência do suco no tanque de resfriamento caiu de quarenta para cinco minutos em decorrência da maior ação de mistura provocada pelas pás retas. O modelo proposto acompanha bem as exigências de potências requeridas pelo suco na medida em que é resfriado...(Resumo completo, clicar acesso eletrônico abaixo)

Impact of the Textile Dye Acid Blue 40 on the Periphyton of a Simulated Microecosystem

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Chromium carbochelate dietary supplementation favored the glucocorticoid response during acute inflammation of Piaractus mesopotamicus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Photoperiod modulation of aggressive behavior is independent of androgens in a tropical cichlid fish

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The Influence of Dietary Lysine on Yellow Perch Female Reproductive Performance and the Quality of Eggs

The objectives of this study were to (1) evaluate if dietary lysine (Lys) has an effect on the free amino acid (FAA) pool of Yellow Perch Perca flavescens eggs, and (2) determine how dietary Lys influences the reproductive performance and eggs fertilization rate (embryo survival) of female Yellow Perch. Two-year-old Yellow Perch of initial size of approximately 75 g were randomly distributed into six 400-L tanks at 32 +/- 1 fish per tank. This experiment included two wheat gluten-based diets in triplicate Lys-deficient ([-] Lys) and Lys-supplemented ([+]Lys; 2.23% in dry feed) diets. Females from the reference group were fed a commercial diet. Females from reference, (+) Lys, and (-) Lys groups were stripped and their eggs divided into 0.4-1.2-g portions and mixed with sperm (21.4 +/- 4.3 mu L) from either reference, (+) Lys, or (-) Lys males. The mean weight of Yellow Perch females and mean total weight of ovulated eggs were the greatest in the reference group compared with both (+) Lys and (-) Lys groups. There were no differences in the ratio of weight of eggs to female body weight as well as egg size among groups. There was no difference among treatments in the concentration of free amino acids except glutamic and aspartic acids in Yellow Perch eggs. There was significant effect of female dietary treatments on the egg fertilization rate averaged across all males. The higher fertilization rate was observed in the reference and (+) Lys groups compared with the (-) Lys group. The effect of female dietary treatment on the egg survival was also dependent on the dietary treatment of males.

EFFECT OF FOOD SHORTAGE ON GROWTH, ENERGETIC RESERVES MOBILIZATION, AND WATER QUALITY IN JUVENILES OF THE REDCLAW CRAYFISH, CHERAX QUADRICARINATUS, REARED IN GROUPS

The aim of this study is to analyze the impact of food shortage on growth performance, by means of energetic reserves (proteins, glycogen and lipids) mobilization and hepatopancreas cells analysis in C. quadricarinatus juveniles maintained in groups, as well as the effect on culture water quality. Two experiments were performed, each of them with two feeding regimes during 45 days. The Control feeding regime, in which crayfish were fed daily (once a day) throughout the experimental period (DF), and the Cyclic feeding regime, in which juveniles were fed for 2 or 4 days (once a day) followed by 2 or 4 days of food deprivation (2F/2D and 4F/4D, respectively) in repeated cycles. Cyclic feeding influenced growth, biochemical composition from hepatopancreas and muscle, and water quality. Juveniles cyclically fed were unable to maintain a normal growth trajectory during 45 days. Apparent feed conversion ratio, apparent protein efficiency ratio, hepatosomatic index and relative pleon mass were similar in cyclic and daily fed animals and no structural damage was found in the hepatopancreas of juveniles subjected to cyclic feeding. The novelty of this study was the significant accumulation of proteins in pleonal muscle in both cyclic feeding regimes (approx. 18%) suggesting that the storage of this constitutive material during food shortage may be an adaptation for a compensatory growth when food becomes abundant again. The cyclic feeding regimes had a positive effect on water quality decreasing inorganic nitrogen concentration. This was due to the reduction in the amount of animal excretes and feces in the group that received approx. 50% less feed. Additionally, water pH was higher in cyclic feeding tanks, as a result of lower organic matter decomposition and consequent release of CO2. Accordingly, total ammonia in the water was significantly lower for the cyclic feeding regimes compared to their respective controls. This study suggests that the protocol of cyclic feeding could be applied at least 45 days in 1 g juveniles maintained in group conditions, without affecting the energetic reserves and hepatopancreas structure, emphasizing the high tolerance of this species to food restriction.

ONTOGENETIC DEVELOPMENT OF SENSORY STRUCTURES ON THE ANTENNULES AND ANTENNAE OF THE GIANT RIVER PRAWN MACROBRACHIUM ROSENBERGII (DE MAN)

In this study the occurrence of sensory structures on the antennules and antennae of the giant river prawn Macrobrachium rosenbergii (De Man) during postembryonic ontogenetic development were examined. Larvae and postlarvae were obtained from hatchery recirculating tanks, juveniles from indoor nursery tanks, and adults from earthen grow-out ponds. The animals were fixed with Karnovsky fixative and dissected. Antennules and antennae were removed, metal-coated, and photodocumented using a scanning electron microscope. The antennules have aesthetascs and simple plumose and pappose setae; the antennae have simple, plumose and pappose setae. These structures increase in density, covered surface, and distribution during ontogeny and should be related to chemoreception and mechanoreception. The antennular statocyst that appears during larval stage VII of the giant river prawn has an array of sensory structures that enable the perception of chemical and tactile stimuli beginning with its early life stages. The ontogenetic changes observed allow an inference that initial-stage larvae, advance-stage larvae, juveniles, and adults have different capacities to exploit the environment.

Contaminação das águas subterrâneas por resíduos de postos de combustíveis: uma abordagem no município de Rio Claro

The contamination of underground waters is a subject of great importance, since a lot of people use this kind of source for public supply. This paperwork manages with how gas stations can contaminate these waters and what are some remediation techniques, used nowadays to solve this problem. The contamination caused by the gas stations can have its origin in the underground storage tanks when they suffer corrosion and show leaking problems. It’s a topic of great relevance, because the hydrocarbons derivated from petroleum present in the fuels can stay for a long time in the environment. Besides that, an analyses of the risk of contamination by gas stations in the city of Rio Claro was made based on three parameters: density of the gas stations, depth of the underground water and hydraulic conductivity. To achieve such goal, maps were elaborated considering those parameters individually and considering the three of them together. Analyzing those maps, it was concluded see that the spots that represent the biggest risks of contamination in Rio Claro are located southeast and center-west.

Reflexão sobre prevenção de acidentes à criança no âmbito doméstico

The aim was to reflect what action to prevent accidents used by caregivers / participants in the home. This is a prospecive cross-sectional descriptive study conducted at the Pediatric Inpatient Unit, Hospital of the Medical School of Botucatu – Unesp, during the months from May to August 2010.A questionnaire was used in the form of check list (Annex I) on measures to prevent accidents. The participant chose two alternatives taking into consideration the order of priority in the prevention of accidents. This study shows that for the age group from 29 days to 2 years, the companions chose these preventive measures for falls, burns, poisoning and drowning, “do not put near the windows mobile” (27.8%), “no access the match, lighter and appliances (22.2%), leave toxic substances out of reach and sight of children (41.7%) and empty buckets, tubs and pools after use (27.8% ). Regarding the age group 2-6 years, the measures for these types of accidents were not put near the windows mobile (26.5%), do not have access to matches, lighters and household appliances (20.9% ), leave toxic products out of reach and sight of children (27.9%) and maintain tanks, tanks and wells or struck with some protection (20.2%). For ages 6 to 10 years, the measures chosen to more such accidents were dry liquid spilled on the ground (23.5%), do not have access to matches, lighters and household appliances (22.5% ), leave toxic products out of reach and sight of children (31%) and keep tanks, tanks and wells or struck with some protection (23.5%). One fact that attracted our attention was that the preventive measures most frequently used by caregivers, regardless of age, show results that differ in few alternatives. It is essential to the understanding of the escorts / participants on the importance of injury prevention. Even today is predominantly defined as accident, injury must be addressed through measures

Utilização de água pluvial para fins não potáveis: análise do atendimento da demanda pelo método de eficiências para dimensionamento de reservatório para diferentes regimes pluviométricos brasileiros

Brazil has about 12 % of a life´s essential resource: the superficial fresh water of the planet. However, today it is possible to observe the bad management of this resource, generating serious consequences on the quality that results in the loss of the use´s availability. In this scenario, the catchment of rainwater for undrinkable use is an alternative that has been broadly studied for the scientific community. When planning a system of rainwater catchment, the sizing of the required volume of the tank that will keep the water has a fundamental importance for the project, seeing that the supersizing of the tank can bring high costs and the undersizing can bring shortage in the water supply. This paper used a methodology based on two concepts: the harvesting efficiencies and the attending efficiencies of the system. This method takes as principle that exist a perfect demand that minimize the repayment time, condition that happened when the efficiencies are equal. Brazilian’s cities with different weathers and different rainfalls where chosen to simulate the attending for different demands for a typical residence. The data where parameterized according to the roof area and the number of residents, that way is possible that a future conference can be easily done and it also ensure results closer to the reality. The results showed that cities with a lower period of drought, even those with high level of rainfall on the raining mouths, have lower potential of water supply. The cities where the rainfall is more constant and also more high, even small roofs areas and small tank´s volumes – about half of the size compare to the cities with less propitious conditions – can generate high levels of water saving. With an eye to promote the environmental sustainability, the investment on projects for the catchment of rainwater is a good alternative

Tratamento da superfície do alumínio via eletrólise a plasma

This paper presents the study on the application of the electrolytic plasma for surface treatment of aluminum. A bibliographical study on the material of interest was preliminarily performed and later designed and built an electrolytic cell, including the excitation source. Unlike conventional electrolysis process, the plasma assisted carry on in the non-linear region of characteristic current/voltage curve. Therefore it requires for the on set of the process that the power supply operates on harder conditions than those on high current process. The plasma produced during the present investigation has temperatures in the range o 6,0.10 3 -7,0 .10 3 K, well above those found in conventional chemical process. It also shows a particular dynamic to promote changes on surface and to produce new materials. The plasma is generated by microdischarge in vapor or gas bubbles involved in physic-chemical processes in electrode regions of the electrolytic cell. The electrode material was the aluminum (7075). The Process Electrolytic Plasma Processing (EPP) is sensitive to various parameters such as operating voltage, current density, electrolyte, concentration of electrolyte, geometry of reactor, temperature of electrolytic solution and dynamic of the fluid in the cell. The experiments were carried on in order to find parameters for a stable abd steady operation. The choice for the electrolytic was silicate/alkali solution in various concentrations to operate in various voltage as well. Plasma was produced on negative (cathode) and positive (anode) electrode, in specific conditions. A stable operation on the cathode process was obtained with low concentration of the electrolytic in aqueous solution, current density around 250V effective voltage. For the evolution of plasma in anodic process it was required higher concentrations and higher... (Complete abstract click electronic access below)

Estudo comparativo de fornecedores de piche

This present study aimed at developing a methodology for analyzing on the feasibility of a new supplier of raw materials, industrial of aluminum production technology Soederberg. This raw material is pitch, which will be used in the manufacture of anodes for the electrolytic pot. The supplier to be analyzed is the Chemcoal of Ukrainian origin. Thereby developing techniques for a complete analysis, targeting the physical and chemical properties of pitch, economic feasibility and potential impacts on the client, potroom where these impacts may affect the production of aluminum, skimming factor, bubble noise, plasticity top anode and the anode consumption. After planning the test that was conducted on two strategies to generate greater traceability of impacts, data were collected and then it was made a statistical treatment of the data using statistical tools to generate the minitab greater reliability of results

Mapeamento geoestatístico da vulnerabilidade do Aquífero Guarani no município de Ribeirão Bonito - SP

The Guaraní aquifer has relevant importance both as a source of water for several urban centres and the development of agriculture and livestock. In recharge areas the aquifer is free and, therefore, subject to contamination of effluents and tailings deposited on soils that cover it. Thus, it becomes crucial not only its protection at all levels, as the knowledge of its degree of natural vulnerability. The present work used geostatistics modeling techniques to study the natural vulnerability of the Guaraní aquifer in the city of Rio Bonito, State of São Paulo, southeastern Brazil, where the Guarani aquifer is exposed. These techniques, extensively used in evaluation studies of mineral deposits and oil tanks, can be adapted to produce a spatial classification or a regionalisation of probabilistic indices of vulnerability. By ordinary kriging method maps of vulnerability classification were obtained. To determine the vulnerability of the aquifer was employed the Aquifer Vulnerability Index (AVI), which requires knowledge of unsaturated zone thickness and permeability. The final product was a map with probabilistic index of vulnerability of the Guaraní aquifer, which presented values between 0 to 0.33 years, framing the area studied in AVI class extremely high vulnerability

Proposta de elaboração de carta de sensibilidade ambiental aplicada a postos de combustíveis em Rio Claro-SP

Leaking of hydrocarbon in fuel underground storage tanks constitute object of concern for urban environmental management, because therefore they provoke damages to the physical, biological and socioeconomic environment. Though laws that regulate this essential activity exist, aiming at to prevent contamination with hydrocarbon, we observe that this still happens. This fact evidences that the selection of places for installation of gas stations has not considered the characteristics of the natural environment, implying in more critical consequences associated to the leaking. The objective of this work is to elaborate a chart applied to the gas stations in Rio Claro/SP. The determination of the Index of Environmental Sensitivity for elaboration of such chart was carried through breaking the selection of factors of Environmental Sensitivity of physical, biological and socioeconomic environment. The balance of these factors was given by means of Ad hoc consultation. The crossing of the information was carried through using the method of overlapping of overlays. The result is a chart that shows us areas with classes of high, middle and low Environmental Sensitivity. One gives credit that this type of material can be used as criterion in the selection of adjusted areas for installations of new gas stations and management of the already installed gas stations. The diagnosis of the current situation of the gas stations in the area and recommendations had also been elaborated.

Estudo de cerâmicas avançadas para fins de blindagem balística

The research involving new materials has always been considered as a differential in the development of a technology company. This occurred naturally since ancient times, often motivated by reasons of a certain age, where the most common material used was also the name of your time and may be cited as an example the Bronze Age, and later was the Iron. Currently, the use of firearms are they used in resolving conflicts between countries, or a more equivocal, as an instrument of social banditry make innovations in the area of shielding welcome, whether for personal use, in the form of vests or vehicle such as cars, tanks and even aircraft. In this context, is a Silicon Carbide Ceramic, with low density and high hardness. Thus, the aim of this study is the evaluation and comparison of these materials, seeking to improve their properties by means of additives such as boron and silicon metal and amorphous YAG. For this work, the specimens were pre-shaped by means of uniaxial later to be referred for isostatic pressing and sintering. The maximum percentage for each additive was 5%, except for the YAG whose percentage was 8.2% (mass percentage). All compositions were subjected to the same tests (x-ray diffraction, apparent density, optical microscopy, Vickers hardness, scanning electron Microscopita), so that one could draw a comparison between the materials under study, samples that showed better mechanical properties and micro structural, related here by hardness testing and microscopy (optical and SEM) were the silicon carbide doped with YAG and alumina samples, demonstrating the potential of these materials for ballistic protection. Other compositions have high porosity, which is highly undesirable, since in order to harmful influences on the mechanical properties discussed below