Monitoramento espacial e análise das características climáticas na influência sobre a cultura de soja no estado do Paraná

In the past years, soya has increased itself as the mean agro export culture in Brazil, encouraging the expansion of its agricultural frontier throughout the country. Brazil is the second biggest soya producer around the world, with a 59,8 million ton production in 2008, according to the Instituto Brasileiro de Geografia e Estatística (IBGE), only behind United States. Around the country, the four leading producer states are Mato Grosso, Paraná, Rio Grande do Sul e Goiás. Therefore, geotechnologies may be used to monitor use and soil occupation in various analyzes periods. In this review, the tools are important to illustrate the soya production areas and also the weather behavior around its production evolution in the territory through the years. Its utilization can contribute to the evolution and optimization around real time monitoring of the Agricola cultures, without being necessary to be in the area with a low financial cost. Generally, this information is strongly important for decision makers in both government and private sector, as soon as the achievement information regards the quantification of area, yield and development of agricultural crops are essential to the economic behavior of culture during the season and even beyond. By obtaining data regarding climate crops 2008/09 and 2009/10, held the climatic water balance calculation based on the dynamics of water storage in soil temperature and precipitation data, interpolation of the data through the interpolator (IDW) that generated thematic precipitation maps. Overall, the use of geotechnology to monitor agricultural areas, can strongly contribute to this monitoring, generating raw material for further analysis at low cost

Avaliação reológica do óleo de abacate (Persea americana mill) e estudo da estabilidade sob condições de aquecimento e armazenamento à temperatura ambiente

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A linguagem da violência nos contos de Famílias terrivelmente felizes de Marçal Aquino

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Histórico e aspectos tecnológicos do processamento da linguiça cuiabana

This paper reports the data on the cuiabana sausage historical aspect, and from the study performed on its technical/sensory characteristics. Four formulations of cuiabana-type sausage were prepared, varying the basic raw material (bovine, chicken and swine meats). For processing these sausages, the raw meats (beef, chicken and pork) were cut into cubes and together with the other ingredients (garlic, cheese, pepper and chives) they were weighed and homogenized. The resulting mixture was refrigerated for 24 hours for intensifying the flavor. Thereafter, it was stuffed into natural casings. These prepared samples were characterized on the physical-chemical profile and on the shelf life under refrigeration for over a seven day-storage in order to assess the microbiological contamination (total coliforms and fecal thermotolerant bacteria), sulphite-reducing clostridium, Salmonella spp., coagulase-positive Staphylococcus), and pH. The sensory evaluation and statistics analysis were carried out on the different types of laboratory- processed cuiabana sausage. Introducing over time changes in the cuiabana sausages formulation are positive factors; therefore, variations in the formulations it is feasible to get a better final product than that original one, and it might be resulted from the market demand.

Um problema de corte de estoque multiobjetivo

In this paper we deal with the one-dimensional integer cutting stock problem, which consists of cutting a set of available objects in stock in order to produce ordered smaller items in such a way as to optimize a given objective function, which in this paper is composed of three different objectives: minimization of the number of objects to be cut (raw material), minimization of the number of different cutting patterns (setup time), minimization of the number of saw cycles (optimization of the saw productivity). For solving this complex problem we adopt a multiobjective approach in which we adapt, for the problem studied, a symbiotic genetic algorithm proposed in the literature. Some theoretical and computational results are presented.

Bioactive compounds of the lipid fractions of agro-industrial waste

This study aimed at evaluating the oils extracted from seeds originating from agro-industrial waste, in order to identify the presence of bioactive compounds. Therefore, determinations of fatty acid profile, triacylglycerols, tocopherol composition, phytosterols, phenolic compounds, total carotenoids, and antioxidant capacity were performed in the oils of grape, guava, melon, passion fruit, pumpkin, soursop, and tomato seeds. Antioxidant capacity analysis was performed by the methods DPPH• , ABTS•+, FRAP, and β-carotene/linoleic acid, besides measure of oxidative stability in the oils. The oils showed to be predominantly unsaturated with high percentage of linoleic essential fatty acid (38.8 to 79.4%), besides presenting significant quantities of tocopherols, phytosterols, and phenolic compounds. Tomato and guava oils showed better results in the antioxidant capacity tests and pumpkin oil had higher induction period in the oxidative stability test (65.3 h). The results obtained in this study collect information that enables the use of new alternative sources of vegetable oils, obtained from agroindustrial waste, which may serve as raw material for food, chemical, and pharmaceutical industries.

Usinabilidade e integridade superficial de implantes dentários

Pós-graduação em Engenharia Mecânica - FEIS

Atenolol characterization in solid formulations available in Brazilian market

Atenolol is the most used drug in Brazil to hypertension treatment. Two crystal structures are known for this molecule: a racemic form (R,S)-atenolol and a pure form S-atenolol. The racemic form is found in commercial tablets. X-ray powder diffraction (XRD) is an adequate tool to study crystalline structures including drugs. Using the Rietveld Method with XRD data it is possible to quantify the crystalline structures existing in the raw material. Other methods like Le Bail and Pawley can be used to the profile fit and phases identification. For this work we analyzed three tablets of atenolol, two generics and the reference (materials were purchased from a drugstore at the city of Araraquara). These tablets were analyzed by Rietveld, Le Bail and Pawley methods. All tablets exhibited the racemic mixture API (R,S)-atenolol. Some crystalline excipients could be characterized: magnesium carbonate hydrate, lactose monohydrate and talc. The conclusion is that the three methods can be efficiently used to characterize the three atenolol tablets.

O Espaço ocupado pelo Homem Pré-Histórico no Oeste Paulista: O caso do Sítio Arqueológico Lagoa São Paulo - 02 no Município de Presidente Epitácio - SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Biodiesel etílico de babaçu x diesel B S1800: ensaio de opacidade da fumaça do trator agrícola variando os horários do dia

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

A influência da temperatura na secagem forçada da matéria-prima cerâmica da Formação Corumbataí na região do Polo de Santa Gertrudes (SP)

Pós-graduação em Geociências e Meio Ambiente - IGCE

Análise global da diversidade de microorganismo importantes para a fermentação nas usinas de álcool: uma abordagem utilizando metagenômica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Técnicas de caracterização microestrutural, por microscopia óptica e microscopia eletrônica de varredura, de aços bifásicos e multifásicos aplicados à indústria automobilística

This project developed microstructural characterization technics of commercial dualphase and multi-phasic (TRIP) steels that were provided by the automotive industry and are currently used as the raw material for the production of automobiles. Inserted in this context, there is the development of the advanced high strength steels in consonance with the ULSABAVC project, which aims the production of safe, economically viable and efficient in terms of fuel consumption vehicles for the 21st century. The micro-structural characterization of biphasic and multiphase steels was done by the identification and quantification of the coexistent phases. In this item, a special attention was given to the technics that were performed using optic microscopy and scanning electron microscopy. An important contribution to this work was the utilization of different alternative chemical reagents (Beraha, Heat-Tinting technics) in addition to the classical ones (Nital and LePera)already used conventionally by the UNESP's Group of Mechanical, Microstructural and Fractografic Characterization of Materials. The revealed microstructures were correlated with the materials' mechanical properties determined through traction tests, such as ultimate tensile strengths, yield strength and stretching important since the material has structural application in the automotive industry. As a result, it was observed the superiority concerning the studied mechanical properties for the biphasic and multiphasic steels when compared to the conventional carbon steels. Besides, it was perceived a large potential for the industrial scale utilization of the Heat Tinting technics in this field, seen its differentiation of the existent phases and easy reproducibility

Gestão de imagens em movimento de matérias jornalísticas em banco de dados na TV Digital

Pós-graduação em Televisão Digital: Informação e Conhecimento - FAAC

Physicochemical characterisation and radical-scavenging activity of Cucurbitaceae seed oils

Oils extracted from Cucurbitaceae seeds were characterised for their fatty acid and tocopherol compositions. In addition, some physicochemical characteristics, total phenolic contents and the radical-scavenging activities were determined. Oil content amounted to 23.9% and 27.1% in melon and watermelon seeds, respectively. Physicochemical characteristics were similar to those of other edible oils and the oils showed significant antioxidant activities. Fatty acid composition showed total unsaturated fatty acid content of 85.2–83.5%, with linoleic acid being the dominant fatty acid (62.4–72.5%), followed by oleic acid (10.8–22.7%) and palmitic acid (9.2–9.8%). The oils, especially watermelon seed oil, showed high total tocopherol and phenolic contents. The γ-tocopherol was the predominant tocopherol in both oils representing 90.9 and 95.6% of the total tocopherols in melon and watermelon seed oils, respectively. The potential utilisation of melon and watermelon seed oils as a raw material for food, chemical and pharmaceutical industries appears to be favourable.