Accelerated aging and electrical conductivity tests in crambe seeds

The aim of this study was to adapt the methodology of the accelerated aging and electrical conductivity tests for determination of physiological potential in crambe seeds. Six seed lots of crambe (cv. FMS Brilhante) were subjected to determination of moisture content, germination test, first count germination, emergence, and emergence speed index. For the accelerated aging test, the traditional methodology was used with water, and with a saturated potassium chloride and sodium chloride solution in three periods of exposure (24, 48, and 72 hours) at 41 degrees C; the electrical conductivity test was performed with four pre-soaking treatments (0, 2, 4, and 8 hours) and four soaking periods (4, 8, 16, and 24 hours) at 25 degrees C. The accelerated aging test with water for 72 hours and the electrical conductivity test with 2 hours of pre-soaking and assessment after 16 hours were effective for classification of the crambe seed lots in regard to physiological quality.

Interactions of Bacillus thuringiensis bioinsecticides and the predatory stink bug Podisus nigrispinus to control Plutella xylostella

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência da temperatura de armazenamento na qualidade das inflorescências de estrelítzia (strelitzia reginae banks ex aiton)

This work was based to study the influence of the storage temperature (cold and room temperature) in the quality of inflorescences strelitzia. The scapes were selected, labeled and there were zero problems concerning mechanical damage, disease and/or plagues. Subsequently this period, the scapes were moved randomly to recipients with water, in which two postharvest trials were conducted. In experiment 1, the flower scapes were placed in buckets with water from public supply and sanitation department and taken to a cold room at temperature of 7.5 degrees C and RH of 90%, for a twelve day period. For the experiment 2, were kept under the same conditions but at room temperature for a period of six days. In both experiments, the visual analysis: color, gloss, stains (by assigning notes), opening and drop florets (count) were evaluated at intervals of four days in cold and every 48 hours at ambient temperature conditions. In both experiments, the visual analysis: color, gloss, stains (by assigning notes), opening and drop florets (count) were evaluated at intervals of four days in cold and every 48 hours at ambient temperature conditions. The sepal is the organ that showed greater loss in coloration. The variable gloss showed the same pattern for the two experiments. Incidences of stains on the inflorescences occurred in patches at room temperature. The scapes increased number of florets open in cold. This tendency did not occur at room temperature. No were observed differences in the fall of florets. Conclude that the storage temperature does not contribute to postharvest quality of strelitzia.

Moulting behavior in leaf-frogs of the genus phyllomedusa (Anura : hylidae)

The species belonging to the subfamily Phyllomedusinae presents physiological and behavioral adaptations to economise water such as secretion of lipids coupled with its spreading onto the skin surface through a complex behavior, adoption of diurnal torpor and secretion of uric acid. Here we describe other adaptation probably involved with water economy, registered in Phyllomedusa distincta, P. tarsius, P. tetraploidea and natural hybrids of P. distincta and P. tetraploidea - at dusk, these amphibians perform an elaborate moulting behavior that encompasses the cleaning of the body with the limbs plus gaping and body contractions. Our data show the daily moulting in P. distincta and suggest that the same mechanism occurs for the other species studied. We suppose that daily moulting improves the skin permeability to water being a characteristic of the phyllomedusines which spread lipids onto the skin surface.

Effect of himatanthus sucuuba in maternal reproductive outcome and fetal anomaly frequency in rats

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Nanoencapsulation enhances the post-emergence herbicidal activity of atrazine against mustard plants

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Controlling the formation of ionic-liquid-based aqueous biphasic systems by changing the hydrogen-bonding ability of polyethylene glycol end groups

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparação termométrica entre preparos cavitários realizados com turbinas de alta-rotação e laser de Er:YAG

The aim of this study was to compare temperature increases produced by a well-known equipment, the high-speed handpieces, with a relatively new instrument, the Er:YAG laser (350 mJ/10 Hz). Thirty-five bovine mandibular incisors, which were reduced to an enamel/dentin thickness of 2,5 mm, were used. Cavity preparation was done till a depth of 2, 5 mm. A thermocouple was placed to read the temperature inside of the pulp chamber. Analysis was performed in these groups: I - high-speed handpiece without water-cooling (n=10); II - high-speed handpiece with water-cooling (n=10); III - Er:YAG laser without water-cooling (n=5); IV- Er:YAG laser with water-cooling (n=10) Group III had only 5 teeth because it was impossible to properly make the cavity preparations by the laser equipment without water cooling. The temperature increases were recorded in a computer linked to the thermocouples and the data of the groups I, II and IV were submitted to Dunn's multiple comparison test (p<0,05). The medium temperature increases were: 11,64ºC for group I, 0,96ºC for group II, 40,86ºC for group III and 2,9°C for group IV. There were no statistical differences between groups lI and IV, and these were different from group I. The cavity preparations made by the high-speed and the laser equipment generated very similar heat increases under water-cooling. The water-cooling is essential to avoid aggressive temperature increases, both when using the high-speed and the laser equipment, and with laser it is especially necessary for ablation of enamel

Comportamento do cálcio e fósforo plasmáticos, em pacientes com hipoparatireoidismo, após administração de carbonato de cálcio em diferentes formas de ingestão

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Proposta de adequação à construção sustentável: tecnologias e alternativas para instituições de ensino

Due to the huge impact negative on the environmental caused by the civil construction, the university plays a majorital role in the proposal of studies and projects that aim the sustainable building. Nowadays, it has been noted the great demand for projects which contain a systemic focus in the tripod of the sustainable development, that is to say, more and more the consumers are demanding that the final result of a project contemplate the social, economic and environmental areas. According to the National Industry Confederation (CNI) and the Brazilian Chamber of the Industry and the Construction (CBIS), the goal for 2020 is that the constructions have an environmental performance 20% higher in comparison to the actual one, starting with an index defined by many indicators, such as: water consumption, energy, residues generation and social-environmental performance of the bought products. In this case, the theme of the project comes around the adequation of scholar institutions to the sustainable construction through simple changes of tecnologies and habits aiming the growth of the environmental eficiency of the enterprise and, consequently, the improve of sustainable practices inside the institution. Once the change is proposed, it will be furnished datas liable of reproduction for the adequation of others scholar institutions, according to it's necessity or interest. After the realization of the studies, it was possible to notice that the environmental performance of a scholar institution can be improved through the implantation of tecnologies of fast return in the investment, such as: flow reducers, rain water reuse system, green roof, retrofit of lamps and execution of a photovoltaic system. Besides the fast return of investment, the monthly economy of the applied tecnologies combined can reach 75% when compared to the actual spending with water and electric energy

Avaliação da toxicidade da vinhaça tratada quimicamente utilizando Oreochromis niloticus (Perciformes: Cichlidae) como organismo teste

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo sobre as respostas diferenciadas de 3 espécies de roedores à fragmentação da Mata Atlântica, utilizando uma abordagem integrativa do balanço hídrico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Índice de análise ambiental simplificado na avaliação de impactos nos recursos hídricos da bacia hidrográfica do Ribeirão do Meio, Leme, São Paulo, Brasil

This study evaluated environmental impacts at Meio Creek watershed, Leme, Sao Paulo, Brazil. A simplified environmental analysis index was applied correlating land use and occupation (vegetation elimination or modification, wildlife, color, smell, grease, oils, foams, larvae and red worms) with water quality parameters (conductivity, dissolved oxygen, pH and temperature). The simplified environmental analysis index showed that 27.8% visited places had a high or worrying environmental impact and 5.6% had a really high impact. As to the results of physical and chemical parameters, pH and conductivity values showed the conditions and standards that water Class 2 and 3 should have. These parameters were not the same for dissolved oxygen levels at most of the analyzed points. Despite the current environmental legislation at federal, state and municipal levels, Leme city does not have an effective environmental plan to control and protect springs and Meio Creek watershed and its tributaries.

Desempenho de bovinos cruzados terminados em confinamento e qualidade dos músculos longissimus e semitendinosus in natura e maturados

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização de linhagens de cártamo (Carthamus tinctorius L.) em condições de deficiência hídrica e reidratação

Pós-graduação em Agronomia (Agricultura) - FCA