Misturador para análise de propriedades reológicas

This study aimed to evaluate the use of a mixer to determine the rheological properties of fluids. The mixer is comprised of an agitation tank and an anchor type impeller. The tests were performed with honey and fruit juices (orange, guava and peach). The rheological characterization was performed using data from the torque and rotation speed required for the operation of fluid agitation. Tests were also made with a concentric cylinder rotational viscometer with the samples being subjected to various shear rates. The rheological parameters were obtained from the flow curves fitted to the power law model. Analyses of results showed that the mixer can be used, within its limitations, to determine rheological properties.

Retificador entrelaçado com elevado fator de potência para operação de um veículo trólebus alimentado por redes em CA Ou CC

This paper presents the development and the main results for an interleaved boost rectifier operating as a special input power stage for a trolleybus type vehicle, allowing its feeding by alternate current (AC) or direct current (DC) distribution power systems. When feeding with two wires (single phase) alternate current distribution system, the converter accomplish active power factor correction, providing a relatively sinusoidal current with low total harmonic distortion (THD) and fully complying with IEC 61000-3-4 standards. In addition, a management control system promotes the required automatic operation changes for the proposed rectifier when the vehicle is changing from the DC distribution power system to the AC distribution power system and vice-versa, keeping its original electrical DC system characteristics for the adjustable speed driver sub-system. The main experimental results for a prototype rated at 150kW are presented, considering its application for a trolleybus with DC adjustable speed driver, demonstrating the proposed converter benefits and the possibility of AC feeding system for trolleybus type vehicle.

Compensação ativa paralela baseada na teoria de potência conservativa

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dressagem monitorada por emissão acústica e potência de corte

Para a realização deste experimento, foram utilizados um rebolo de óxido de alumínio instalado em uma retificadora plana, um dispositivo em forma de balança juntamente com o sensor de deslocamento, um sistema de aquisição de sinais e um dressador de ponta única de diamante. O processamento digital dos dados foi obtido com o software Matlab. Nos ensaios, foram aplicados diferentes graus de recobrimento e profundidade de dressagem e comparada a agressividade obtida. A partir dos dados resultantes, os parâmetros RMS, DPO e DPKS mostraram-se bons indicadores para a operação. Também ficou comprovado que para recondicionar e definir novas características para o rebolo é necessária a remoção de 120 um. Do estudo do espectro do dinal de EA, notou-se que não há componentes hormônicas com frequência superior a 200 KHz.

Determinação do posicionamento ótimo de apoios em pontes

This paper presents a study to determine the optimal support positions in bridges, as well as the optimal relation between the spans of beams, aiming both the reduction and the unifirmization of the efforts in these structures. The mathematical problem is formulated in order to minimize the maximum bending moments, taking the coordinate of each internal support as design variable. To take into account possible location limitations, size constraints are also considered in the formulation. The software developed based on this study determines the efforts in each support for load shifting along the structure by the usage of the Displacement Method, and the optimization is performed with a mathematical programming technique. The structures analyzed from the computational implementation of the idealized model point to the validation and efficiency of the proposed procedure.

Balanço de energia de fluxo de CO2: cerrado da floresta estadual de Assis

Based on climatological data and energy flow, this paper analyzes the behavior observed in microclimatic an important remnant of cerrado in the São Paulo State. The seasonal climate is well marked, in the study area, with two climatic periods (one dry and one wet). The vegetation presents physiology as a function of water availability and the local thermal conditions and can be seen marked changes in the landscape due to the more or less presence of solar radiation. It’s important to understand the ecosystems behave in the context of global change. It has gained the attention of many researchers in the world.

Estudo hierárquico do sistema de reprodução entre e dentro de frutos, fluxo de pólen e estrutura genética espacial em um fragmento e em árvores isoladas na pastagem de hymenaea stigonocarpa mart. ex hayne na região de cerrado

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise do acabamento superficial e da potência consumida na usinagem de fresamento frontal e cilíndrico tangencial da madeira de eucalipto

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aproximação para Problema de Controle Ótimo Impulsivo e Problema de Tempo Mínimo sobre Domínios Estratificados

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência do treinamento aeróbico intradialítico no fluxo sanguíneo cerebral e o reflexo sobre a função cognitiva e qualidade de vida em pacientes renais crônicos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Simulação numérica de fluxo de águas subterrâneas na bacia do Rio Corrente (BA)

The numeric simulation is an important tool applied in understanding the dynamics of groundwater flow. In a hydrogeological model the processes responsible for groundwater flow are described by numerical formulations that allow the simplification, representation and understanding of the dynamics of the Aquifer System. In this work, a steady state groundwater flow simulation of Urucuia Aquifer System (UAS) part of the Corrente river basin was conducted, using the finite element method through software FEFLOW, to understand the dynamics of groundwater flow and quantify the hydrologic balance. The aquifer system Urucuia lodges in the São Francisco hydrogeological province and corresponds to a set of interconnected aquifers that occur in rocks from Urucuia group in the Urucuia sub-basin described by Campos e Dardenne (1997). The system is a porous media one, in a shape of a thick table mountain, consisting essentially of sandstones. The Corrente river basin is located in UAS in Western State of Bahia and it's one of the main units to maintaining permanent flow (Q95) and average natural flow of the São Francisco river. The simulation performed in this work obtained the following results for the modelled region: horizontal hydraulic conductivity of 3 x 10-4 m/s and vertical one 6 x 10-5 m/s; maximum recharge of 345 mm and minimum of 85 mm/a. It was concluded that: (1) regional groundwater flow has eastbound; with an exception of the extreme northeast portion, where the flow has opposite direction; (2) there are smaller water side dividers with an approximate direction EW, that guide the flow of water to the drainage that cut the aquifer; and (3) the UAS at Corrente river basin can be understood as a free regional aquifer system, isotropic and homogeneous. Regionally, the small lithological variations present in the Urucuia group can be neglected and do not exhibit significant influences on the dynamics of ground water flow

Simulação numérica de fluxo de águas subterrâneas do aquífero Rio Claro, na região do campus da UNESP - Rio Claro, SP

The water management in any area is highly important to the success of many business and also of life and the understanding of your relationship with the environment brings better control to its demand. I.e. hydrogeological studies are needed under better understanding of the behavior of an aquifer, so that its management is done so as not to deplete or harm it. The objective of this work is the numerical modeling in transient regime of a portion of the Rio Claro aquifer formation in order to get answers about its hydrogeological parameters, its main flow direction and also its most sensitive parameters. A literature review and conceptual characterization of the aquifer, combined with field campaigns and monitoring of local water level (NA), enabled the subsequent construction of the mathematical model by finite elements method, using the FEFLOW 6.1 ® computational algorithm. The study site includes the campus of UNESP and residential and industrial areas of Rio Claro city. Its area of 9.73 km ² was divided into 318040 triangular elements spread over six layers, totaling a volume of 0.25 km³. The local topography and geological contacts were obtained from previous geological and geophysical studies as well as profiles of campus wells and SIAGAS / CPRM system. The seven monitoring wells on campus were set up as observation points for calibration and checking of the simulation results. Sampling and characterization of Rio Claro sandstones shows up a high hydrological and lithological heterogeneity for the aquifer formation. The simulation results indicate values of hydraulic conductivity between 10-6 and 10-4 m / s, getting the Recharge/Rainfall simulation in transient ratio at 13%. Even with the simplifications imposed on the model, it was able to represent the fluctuations of local NA over a year of monitoring. The result was the exit of 3774770 m³ of water and the consequently NA fall. The model is considered representative for the...

Dinâmica não linear e controle de um sistema vibratório modelado com memória de forma e, excitado por fontes de energia do tipo ideal e não ideal

Pós-graduação em Engenharia Mecânica - FEB

Biohidrogenação microbiana e o fluxo duodenal de ácidos graxos do rumen em novilhos de corte suplementados com fontes lipídicas em dietas contendo glicerina

Pós-graduação em Zootecnia - FCAV