Identification of polymorphisms in the osteopontin gene and their associations with certain semen production traits of water buffaloes in the Brazilian Amazon

Contents: The osteopontin gene may influence the fertility of water buffaloes because it is a protein present in sperm. The aim of this work was to identify polymorphisms in this gene and associate them with fertility parameters of animals kept under extensive grazing. A total of 306 male buffaloes older than 18 months, from two farms, one in the state of Amapá and the other in the state of Pará, Brazil were used in the study. Seven SNPs were identified in the regions studied. The polymorphisms were in gene positions 1478, 1513 and 1611 in the region 5′upstrem and positions 6690, 6737, 6925 and 6952 in the region amplified in intron 5. The SNPs were associated with the traits, namely scrotal circumference, scrotal volume, sperm motility, sperm concentration and sperm pathology. There were significant SNPs (p < 0.05) for all the traits. The SNP 6690 was significant for scrotal circumference, sperm concentration, sperm motility and sperm pathology and the SNP 6737 for scrotal volume. The genotype AA of SNP 6690 presented the highest averages for scrotal circumference, sperm concentration and motility and the lowest total number of sperm pathologies. For the scrotal volume trait, the animals with the largest volume were correlated with the presence of the genotype GG of SNP 6737. These results indicate a significance of the osteopontin gene as it seems to exert a substantial influence on the semen production traits of male buffaloes. © 2013 Blackwell Verlag GmbH.

Age Affects Exercise-Induced Improvements in Heart Rate Response to Exercise

The aim of the present study was to analyze the effects of age on cardiorespiratory fitness (CRF), muscle strength and heart rate (HR) response to exercise adaptation in women in response to a long-term twice-weekly combined aerobic and resistance exercise program. 85 sedentary women, divided into young (YG; n=22, 30.3±6.2 years), early middle-aged (EMG; n=28, 44.1±2.5 years), late middle-aged (LMG; n=20, 56.7±3.5 years) and older (OG; n=15, 71.4±6.9 years) groups, had their CRF, muscle strength (1-repetition maximum test) and HR response to exercise (graded exercise test) measured before and after 12 months of combined exercise training. Exercise training improved CRF and muscle strength in all age groups (P<0.05), and no significant differences were observed between groups. Exercise training also improved resting HR and recovery HR in YG and EMG (P<0.05), but not in LMG and OG. Maximal HR did not change in any group. Combined aerobic and resistance training at a frequency of 2 days/week improves CRF and muscle strength throughout the lifespan. However, exercise-induced improvements in the HR recovery response to exercise may be impaired in late middle-aged and older women. © Georg Thieme Verlag KG.

Platelet-Rich Plasma And Chronic Wounds: Remaining Fibronectin May Influence Matrix Remodeling And Regeneration Success

Background: Platelet-rich plasma has been largely used as a therapeutic option for the treatment of chronic wounds of different etiologies. The enhanced regeneration observed after the use of platelet-rich plasma has been systematically attributed to the growth factors that are present inside platelets' granules. Aim: We hypothesize that the remaining plasma and platelet-bound fibronectin may act as a further bioactive protein in platelet-rich plasma preparations. Methods: Recent reports were analyzed and presented as direct evidences of this hypotheses. Results: Fibronectin may directly influence the extracellular matrix remodeling during wound repair. This effect is probably through matrix metalloproteinase expression, thus exerting an extra effect on chronic wound regeneration. Conclusions: Physicians should be well aware of the possible fibronectin-induced effects in their future endeavors with PRP in chronic wound treatment. © 2013 International Society for Cellular Therapy.

Interstitial oxygen's influence on the corrosion behavior of Ti-9Mo alloys

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

DNA for nano-bio scale computation of chemical formalisms using Higher Order Logic (HOL) and analysis using an interdisciplinary approach

Bio-molecular computing, 'computations performed by bio-molecules', is already challenging traditional approaches to computation both theoretically and technologically. Often placed within the wider context of ´bio-inspired' or 'natural' or even 'unconventional' computing, the study of natural and artificial molecular computations is adding to our understanding of biology, physical sciences and computer science well beyond the framework of existing design and implementation paradigms. In this introduction, We wish to outline the current scope of the field and assemble some basic arguments that, bio-molecular computation is of central importance to computer science, physical sciences and biology using HOL - Higher Order Logic. HOL is used as the computational tool in our R&D work. DNA was analyzed as a chemical computing engine, in our effort to develop novel formalisms to understand the molecular scale bio-chemical computing behavior using HOL. In our view, our focus is one of the pioneering efforts in this promising domain of nano-bio scale chemical information processing dynamics.

Fisiologia e produção da soja tratada com cinetina e cálcio sob deficit hídrico e sombreamento

The objective of this work was to evaluate the effects of kinetin and calcium applications on the physiologic and productive traits of soybean plants, subjected to drought and shade conditions, at flowering. A randomized complete block design was used, in a split-plot arrangement, with four replicates. Soybean plants cultivated in 38 dm³ pots were sprayed with calcium and kinetin, alone or mixed, and subjected to drought and shade during 12 days. After stress period, plants were cultivated under appropriate water and light availability. Calcium and kinetin application resulted in maintenance of the relative water content after four days of drought beginning. Membrane damage, measured at the end of stress period, was lower in plants sprayed with calcium and kinetin. CO2 assimilation diminished by stress condition, mainly under drought, and grain yield decreased at the same intensity in both environments.

Theoretical investigation of geometric configurations and vibrational spectra in citric acid complexes

The performance of advanced electronic ceramics is directly related to the synthesis route employed. Sol-gel methods are widely used for this purpose. However, the physicochemical intermediate steps are still not well understood. Better understanding and control of these processes can improve the final quality of samples. In this work, we studied theoretically the formation of metal complexes between citric acid and lithium or barium metal cations with different citric acid/metal proportions, using Density Functional Theory electronic structure calculations. Infrared and Raman scattering spectra were simulated for the more stable geometric configurations. Using this methodology, we identified some features of complexes formed in the synthesis process. Our results show that the complexes can be distinguished by changes in the bands assigned to C=O, COH-, and COO- group vibrations. An estimate of the most stable complexes is made based on total energy.

Utilization of teflon and aluminum oxide for wheel cleaning in Minimum Quantity Lubrication (MQL) grinding

Researches concerning cooling-lubrication optimization in grinding have been conducted to contribute to a more sustainable process. An alternative to flood coolant is minimum quantity lubrication (MQL), which spray oil droplets in a compressed air jet. However, problems related to wheel cleaning were reported, due to wheel loading by a mixture of chips and oil, resulting in worsening of surface quality. This work aims to evaluate the viability of Teflon and aluminum oxide for wheel cleaning, compared to MQL without cleaning and MQL with cleaning by compressed air, through the following output variables: surface roughness, roundness, wheel wear, grinding power and acoustic emission. Vickers microhardness measurements and optical microscopy were also carried out. The results showed that both materials were efficient in cleaning the wheel, compared to MQL without cleaning, but not as satisfactory as compressed air. Much work is to be done in order to select the right material for wheel cleaning.

Experimental RTM manufacturing analysis of carbon/epoxy composites for aerospace application

The success of manufacturing composite parts by liquid composite molding processes with RTM depends on tool designs, efficient heat system, a controlled injection pressure, a stabilized vacuum system, besides of a suitable study of the preform lay-up and the resin system choice. This paper reports how to assemble a RTM system in a laboratory scale by specifying heat, injection and vacuum system. The design and mold material were outlined by pointing out its advantages and disadvantages. Four different carbon fiber fabrics were used for testing the RTM system. The injection pressure was analyzed regarding fiber volume content, preform compression and permeability, showing how these factors can affect the process parameters. The glass transition temperature (Tg) around 203 ºC matched with the aimed temperature of the mold which ensured good distribution of the heat throughout the upper and lower mold length. The void volume fraction in a range of 2% confirmed the appropriate RTM system and parameters choice.

Live High-Train High increases hemoglobin mass in Olympic swimmers

This study tested whether 3-4 weeks of classical Live High-Train High (LHTH) altitude training increases swim-specific VO2max through increased hemoglobin mass (Hb(mass)).Ten swimmers lived and trained for more than 3 weeks between 2,130 and 3,094 m of altitude, and a control group of ten swimmers followed the same training at sea-level (SL). Body composition was examined using dual X-ray absorptiometry. Hb(mass) was determined by carbon monoxide rebreathing. Swimming VO2peak was determined and swimming trials of 4 x 50, 200 and 3,000 m were performed before and after the intervention.Hb(mass) (n = 10) was increased (P < 0.05)after altitude training by 6.2 +/- A 3.9 % in the LHTH group, whereas no changes were apparent in the SL group (n = 10). Swimming VO2peak was similar before and after training camps in both groups (LHTH: n = 7, SL: n = 6). Performance of 4 x 50 m at race pace was improved to a similar degree in both groups (LHTH: n = 10, SL: n = 10). Maximal speed reached in an incremental swimming step test (P = 0.051), and time to complete 3,000 m tended (P = 0.09) to be more improved after LHTH (n = 10) than SL training (n = 10).In conclusion, 3-4 weeks of classical LHTH is sufficient to increase Hb(mass) but exerts no effect on swimming-specific VO2peak. LHTH may improve performance more than SL training.

Long-Lasting Oscillations in the Electro-Oxidation of Formic Acid on PtSn Intermetallic Surfaces

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

On the Electrochemical Deposition and Dissolution of Divalent Metal Ions

The deposition of Cu2+ and Zn2+ from aqueous solution has been investigated by a combination of classical molecular dynamics, density functional theory, and a theory developed by the authors. For both cases, the reaction proceeds through two one-electron steps. The monovalent ions can get close to the electrode surface without losing hydration energy, while the divalent ions, which have a stronger solvation sheath, cannot. The 4s orbital of Cu interacts strongly with the sp band and more weakly with the d band of the copper surface, while the Zn4s orbital couples only to the sp band of Zn. At the equilibrium potential for the overall reaction, the energy of the intermediate Cu+ ion is only a little higher than that of the divalent ion, so that the first electron transfer can occur in an outer-sphere mode. In contrast, the energy of the Zn+ ion lies too high for a simple outer-sphere reaction to be favorable; in accord with experimental data this suggests that this step is affected by anions.

Large-Area Plasmonic Substrate of Silver-Coated Iron Oxide Nanorod Arrays for Plasmon-Enhanced Spectroscopy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Some Physical and Mechanical Properties of Medium-Density Fiberboard Made from Giant Bamboo

The objective of this study was to evaluate the density, density profile, water swelling and absorption, modulus of elasticity and rupture from static bending, and tensile strength of experimental medium-density fiberboards manufactured using Dendrocalamus giganteus (Munro bamboo). The fiber production was carried out through the chemo-thermo-mechanical pulping process with four different conditions. The panels were made with 10% urea formaldehyde resin based on dry weight of the fibers, 2.5% of a catalyzer (ammonium sulfate) and 2% paraffin. The results indicate that treatments with the highest alkali (NaOH) percentage, time and splinter heating temperature improved the physical properties of the panels. The root-fiber interface was evaluated through scanning electron microscopy in fracture zones, which revealed fibers with thick, inflexible walls. The panels' mechanical properties were affected due to the fiber wall characteristics and interaction with resin. Giant bamboo fiber has potential for MDF production, but other studies should be carried out.

A Quality Assessment of Titanium Castings Produced in an Experimental Short-Heating-Cycle Investment

The aim of this study was to evaluate the quality of casting produced in an experimental short-term heating-cycle investment. Thus, reaction layer and castability of titanium casting using an experimental spinel-based investment (VR) with short heating cycle were compared with the commercial short-heating-cycle spinel-based investment Trinell (TR), the silica-phosphate-based investment Rematitan Plus ( RP), and the conventional spinel-based investment Rematitan Ultra (RU). VR has polymeric fibers added to inorganic particles. Reaction layer assessments were carried out using Vickers hardness and elemental analysis using dispersive X-ray microanalysis (EDX). Mesh patterns were used for castability test, and powder characterization was made by scanning electron microscopy (SEM). Hardness evaluation showed no difference among the investments between 100 and 200 mu m. The most important contaminant element for VR, TR, and RU was oxygen. Higher levels of mold filling were found for TR, VR, and RU compared with that obtained with RP. The quality of castings, characterized by means of the assessments of reaction layer and castability, made from the VR was similar to the commercial investments TR and RU but superior to the RP.