Desenvolvimento de um biorreator rotativo para produção de enzimas celulolíticas por fermentação em estado sólido

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Obtenção e caracterização de filmes finos de Bi3NbO7 pelo método dos precursores poliméricos

Pós-graduação em Engenharia Mecânica - FEG

Atributos da solução e do solo de cerrado após aplicação de resíduo da extração de celulose

Pós-graduação em Agronomia - FEIS

Comportamento da cana-de-açúcar em duas safras e atributos físicos do solo, sob diferentes tipos de preparo

The tillage comprises on average 25% of the cost of deploying a reed, so this cost reduction measures are desirable since they do not compromise the quality of the operation and longevity of sugarcane. The objective was to evaluate the effect of different tillage systems in Acrustox, correlating soil physical properties and characteristics of sugarcane agroindustrial plant cane and ratoon cane. We used five types of soil tillage, over experimental design in blocks with five replications. The particle size was measured every 0.1 m to 0.4 m depth, through deformed soil samples collected at the end of the first growth cycle of the culture. For other soil physical properties: bulk density, total porosity and water content, assessments were performed at the end of each cycle, collecting soil samples in layers of 0-0.20 to 0.21-0.40 m, in addition to performing the penetration resistance, using a penetrometer impact. The response of sugarcane depending on the types of tillage was determined from the evaluation of productivity per hectare of stem (TCH), sugar (TPH), the values of pol % cane (AP), sugar total recoverable (ATR) and fiber samples collected at harvest stalk of sugarcane plant and ratoon cane. In the tillage studied, there was a change of the physical attributes of the soil, causing reduced productivity in 2009/2010 crop, compared with the 2008/2009 season. In tillage system of furrowing direct lowest result was observed for TCH, especially in 2009/2010 crop, when the difference with conventional tillage was 20.53 Mg ha(-1).

Avaliação dos ciclos de polimerização da resina acrílica para base de prótese total

In the present work it was studied the behavior of four water bath curing cycles of heat activated acrylic resin considered as long duration (I – 65ºC for 30 min;50ºC for 23h and 30min; and 100º C for 1h; II- 50ºC for 24h and the rapid cycle), compared to the known long time curing cycle (9 hours for 72ºC) and short curing cycle (1 h for 65ºC; 30 min to elevate at 100º C and 1:00 to 100º C). Analysis consisted of observations and verification of the residual monomer, weight alterations, dimensional, dimensional lineal, porosity and hardness to determine material performance. The results pointed out that residual monomer presented statistical significant differences in the factor storage and interaction among the factors cycle X storage for weight alteration; statistical significant differences for the factor storage for lineal dimensional alterations, without significant differences for hardness. Porosity was verified in minimum degree in the cycle III and in appreciable amount in the cycle IV

Zonas homogêneas de atributos do solo para o manejo de irrigação em pomar de videira

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Alterações nas propriedades físicas de um latossolo vermelho-escuro sob diferentes culturas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Propriedades físicas de latossolo e argissolo em função de práticas de manejo aplicadas na entrelinha da cultura da seringueira (Hevea brasiliensis)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Processamento e caracterização de compósito fibra de sisal/resina epóxi via RTM

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização de argilas usadas para produção de cerâmica vermelha e estudo das alterações nas suas propriedades pela adição de resíduos

Neste trabalho são apresentados os resultados de caracterização das principais argilas usadas pela indústria cerâmica vermelha regional e, também, de alguns resíduos sólidos produzidos na região de Presidente Prudente - SP. Os resultados da incorporação destes resíduos em massas cerâmicas são avaliados através do estudo de suas propriedades tecnológicas. Para a caracterização dos materiais foram utilizadas as seguintes técnicas: análise textural (concentração das frações areia, silte e argila), difratometria de raios X e análise térmica. As propriedades tecnológicas de corpos de prova cerâmicos foram avaliadas através dos seguintes parâmetros: retração linear (RL), perda de massa ao fogo (PF), massa específica aparente (MEA), porosidade aparente (PA), absorção de água (AA) e resistência mecânica à flexão (RMF). Corpos de prova, com diferentes concentrações de resíduos, foram prensados (prensa uniaxial manual) e queimados em temperaturas que variaram de 800 a 1200 oC, usando um forno tipo mufla com controle de temperatura. As argilas sedimentares foram coletadas nas margens do rio Paraná e em áreas de várzea, próximas as cerâmicas. As amostras estudadas, coletadas nos depósitos das cerâmicas, são usadas para produção de tijolos maciços, blocos furados e telhas. Quatro tipos diferentes de resíduos foram estudados: (1) lodo de estação de tratamento de água ETA, (2) torta de filtro de indústria de re-refino de óleo lubrificante, (3) pó de vidro (soda-cal) de garrafa tipo long neck descartável, e (4) cinza de bagaço de cana. Estes resíduos foram incorporados em massas cerâmicas coletadas nas indústrias... (Resumo completo, clicar acesso eletrônico abaixo)

Contribuição à caracterização nanoestrutural por saxs de sonogéis de sílica obtidos por processo sol-gel

As características estruturais de sonogéis obtidos a partir da hidrólise ácida do TEOS estimulada por ultrasom foram estudadas por espalhamento de raios-x a baixo ângulo (SAXS). O estudo inclui: i) o processo de agregação em diferentes temperaturas; ii) o envelhecimento dos géis úmidos na fase líquida de preparação e depois da troca da fase líquida por álcool e acetona; iii) a secagem dos géis; iv) a estrutural evolução de xerogéis e aerogéis com o tratamento térmico até 1100 oC; e v) um estudo comparativo usando SAXS e adsorção de nitrogênio na caracterização de aerogéis e xerogéis... (Resumo completo, clicar acesso eletrônico abaixo)

Avaliação da influência dos parâmetros de processo de soldagem MIG no surgimento de poros em tubos de alumínio

The process of electric arc welding with shielding gas (GMAW) is being increasingly used in various industrial applications. This process occurs by which an electric arc is established between the work piece and a consumable in the form of wire, the arc melts the wire continuously as it is fed to the weld pool. The weld metal is protected from the atmosphere by flowing a gas (or gas mixture) inert or active. This paper presents a study of the welding process GMAW - MIG on aluminum tubes, alloy 6101 - T6, used in the manufacture of armored busbar, intended for driving electric power plants. 5(five) were welded specimens, changing certain welding parameters at each time was monitored welding joint as well as the interpass temperature. Tests were performed bending, tensile and macrographical analysis of body-of-evidence and through its results was possible to reach a better welding condition, which minimizes the appearance of pores, since the porosity has great influence on the mechanical strength and electrical conductivity of welded pipes

Obtenção e caracterização de suporte de regeneração óssea de dióxido de titânio

Due to complications caused by metallic implants in the replacement of bone tissue, the biological application of ceramics raised and became a viable alternative. The titania has the ability to promote bone tissue regeneration based on its structure, mechanical and biologically properties compatibility. The present work aims at obtaining and characterization of Titania (TiO2) porous ceramics produced by the polymeric sponge method (replica method). Polyurethane sponge with 10 ppi and 15 ppi (pores per linear inch) were used. The process differentiation is the air blower used to remove excess slurry. The ceramics sponges were dried in an oven, then pre-sintered at 1000 o C and sintered at 1450 o C. The effect of direct sintering at 1450 o C was also assessed. The percentage of solids used to prepare the slurry was 40 to 45% by weight. To increase the surface porosity of the sponge, 20% of starch was added. There was difficulty on controlling the thickness of the slurry layers on the sponge which resulted in the variation of samples mechanical resistance. Despite this, the results obtained are quite promising for the proposed use, indicating that it is possible to obtain titania sponges with an apparent porosity of around 60%, a bulk density ranging from 40 to 47% and a compressive strength resistance – that with better control of layers depositions – can vary from 1 to 4 MPa

Modelo tectono-estrutural dos campos de petróleo Namorado, Cherne e Albacora

The main goal in this research is a tectono-estructural characterization of the Cherne, Albacora and Namorado Fields, located at Campos Basin, in order to investigate the relationship between the geologic evolution and the rock´s physical properties of the reservoir, and how they affect the hydrocarbon accumulation in those fields. Well correlations show that the inferior turbidites have a regional lateral continuity. Basic petrophysics analysis, calculated here, shows that the three fields present porosity values that range from 15 to 20%, shale volume range from 26 to 30% and formation water saturation range from 23 to 45%, based on formation water resistivity dada from Albacora Field. Petrophysics maps feature a trend in Albacora Field that increase the porosity values to SE, and in Cherne and Namorado Field the trend increase towards N. Seismic horizons where interpreted between the first appearance of the Namorado Sandstone and the top of Quissamã Formation. This interval presents normal listric faulting, in Cherne and Namorado Field with NWSE and NE-SW direction, and sedimentation trend to NW-SE, in Albacora Field the faulting presents a NNE-SSW and N-S direction, with a sedimentation trend to NE-SW. Seismic attribute maps present amplitude anomalies close to the producing wells, and on Namorado Field, it indicates a potential hydrocarbon accumulation in the NE region. For each field is indicated laboratory tests for a better characterization of the petrophysical properties, since that they don’t form the same reservoir level, therefore, not influencing the water saturation calculation

Produção de eletrodos em carbono vítreo monolítico e reticulado a partir da resina furfurílica dopada com cobre

The glassy carbon is a material with a huge technological evolution. Due to its lightness, biocompatibility and their thermal and electrical properties this material finds applications in several industrial fields such as electronics, medical, aerospace and chemical. In order to explore the conductive properties of glassy carbon for use as modified electrodes, the present work aims the processing of monolithic and reticulated glassy carbon with colloidal copper for use in electrochemical applications. First, the best parameters for the cure of furfuryl alcohol resin doped were established through viscosimetry measurements and pressurized differential scanning calorimetry. The analysis of the micrographs of the cured resins show that copper concentrations above 3% weight, generate higher porosity in the material. The characterizations of the monolithic and reticulated glassy carbon resulting from carbonization were performed by scanning electron microscopy (SEM), Raman and Electrochemical impedance spectroscopy, and although it was not possible to detect the presence of copper by SEM, the influence of these particles have been observed by Raman and FT-IR spectra and electrochemical behavior of the material. The decrease in conductivity of monolithic and reticulated glassy carbon in the presence of copper may be related to the defects caused by the presence of copper in the structure of the material.