326 resultados para Farelo de algodão como ração
Resumo:
O presente trabalho busca apresentar um método de balanceamento de ração (estudo de caso) que ofereça as exigências necessárias para o desenvolvimento de animais ruminantes, com diversas fontes de proteínas ao custo mínimo de produção para os produtores. Deste modo, o confinamento tem surgido como uma importante ferramenta para o pecuarista, que deseja ganhar em escala no seu sistema de produção e qualidade em seus produtos. Assim, a adoção de técnicas de manejo e alimentação que viabilizem a produção de carnes de melhor qualidade torna-se muito importante para colocar o setor pecuário em situação de igualdade com os grandes países produtores de carne. Para a realização deste trabalho, foi feito um levantamento bibliográfico e uma pesquisa de campo com o administrador de uma fazenda no município de Presidente Prudente-SP. Através dos resultados obtidos, pode-se verificar que neste estabelecimento têm diminuído seus lucros, principalmente em virtude dos altos custos da alimentação.
Resumo:
The objective of this work was to evaluate the energy and economic efficiency indexes per unit of cotton agro-ecosystem area in family production systems of Paraguay and Brazil; and, to establish a relationship between the energy and economic. Typologies presented by the Program to Support Small Cotton Holdings (Paraguay), and by the National Program for Strengthening Family Agriculture (Brazil). Family systems of the two countries were identified; these are located from Paraguay (San Juan–CA) and from Brazil (Leme–SP). To construct the energy expenditure structure of the cotton agro-ecosystem, as well as to assess the economic efficiency, the mean values obtained were considered, when they presented similarities in production systems and they were within the typology proposed in this study. From the technical itinerary observed the Paraguayan agro-ecosystem depended (fossil fuel 56.76%) and industrial source (35.99%). Thus, the energy balance of the agricultural stage was established, which attained a value of 17,740.69 MJ ha-1; an energy efficiency of 5.28, and a cultural efficiency of 3.04. The Brazilian agro-ecosystem depended on energy from industrial source (insecticides 39.82%) and from fossil fuel (33.59%); it reached an energy balance of 19,547.88 MJ ha-1; an energy efficiency of 2.12, and a cultural efficiency index of 0.71. In the economic and energy indicator ratio, with regard to the months referring to the harvest time, that is to say, March, April, and May, the maximum economic efficiency indicator of paraguay was attained in the month of May (1,00), and from Brazil in the month of May (1,71). Both production systems analyzed were presented efficient, however, dependent of external circumstances and non-renewable energy sources.
Resumo:
The objective of this work was to evaluate the energy and economic efficiency indexes per unit of cotton agro-ecosystem area in family production systems of Paraguay and Brazil; and, to establish a relationship between the energy and economic. Typologies presented by the Program to Support Small Cotton Holdings (Paraguay), and by the National Program for Strengthening Family Agriculture (Brazil). Family systems of the two countries were identified; these are located from Paraguay (San Juan–CA) and from Brazil (Leme–SP). To construct the energy expenditure structure of the cotton agro-ecosystem, as well as to assess the economic efficiency, the mean values obtained were considered, when they presented similarities in production systems and they were within the typology proposed in this study. From the technical itinerary observed the Paraguayan agro-ecosystem depended (fossil fuel 56.76%) and industrial source (35.99%). Thus, the energy balance of the agricultural stage was established, which attained a value of 17,740.69 MJ ha-1; an energy efficiency of 5.28, and a cultural efficiency of 3.04. The Brazilian agro-ecosystem depended on energy from industrial source (insecticides 39.82%) and from fossil fuel (33.59%); it reached an energy balance of 19,547.88 MJ ha-1; an energy efficiency of 2.12, and a cultural efficiency index of 0.71. In the economic and energy indicator ratio, with regard to the months referring to the harvest time, that is to say, March, April, and May, the maximum economic efficiency indicator of paraguay was attained in the month of May (1,00), and from Brazil in the month of May (1,71). Both production systems analyzed were presented efficient, however, dependent of external circumstances and non-renewable energy sources.
Resumo:
Currently, the efficiency in field operations and the increased productivity of crops is only possible with the use of agricultural machinery and equipment. This intensification of mechanized activities in agriculture, however, led to higher energy costs on farms mainly in the fuel consumption of agricultural tractors. The objective was to compare the fuel consumption of a tractor on tillage operations for irrigated cotton in semi-arid region varying two tire inflation pressures. The tests were conducted in Maricopa Agricultural Center (MAC), an experimental farm belonging to The University of Arizona using a 4x2 TDA Case tractor equipped with a 88kw autopilot system. The results showed lower values in the hourly fuel consumption by using the minimum tire inflation pressure of 124 kPa for all tillage equipment used.
Resumo:
Crop yield is influenced by several factors with variability in time and space that are associated with the variations in the plant vigor. This variability allows the identification of management zones and site-specific applications to manage different regions of the field. The purpose of this study was the use of multispectral image for management zones identification and implications of site-specific application in commercial cotton areas. Multispectral airborne images from three years were used to classify a field into three vegetation classes via the Normalized Difference Vegetation Index (NDVI). The NDVI classes were used to verify the potential differences between plant physical measurements and identify management zones. The cotton plant measurements sampled in 8 repetitions of 10 plants at each NDVI class were Stand Count, Plant Height, Total Nodes and Total Bolls. Statistical analysis was performed with treatments arranged in split plot design with Tukey’s Test at 5% of probability. The images were classified into five NDVI classes to evaluate the relationship between cotton plant measurement results and sampling location across the field. The results have demonstrated the possibility of using multispectral image for management zones identification in cotton areas. The image classification into three NDVI classes showed three different zones in the field with similar characteristics for the studied years. Statistical differences were shown for plant height, total nodes and total bolls between low and high NDVI classes for all years. High NDVI classes contained plants with greater height, total nodes and total bolls compared to low NDVI classes. There was no difference in Stand Count between low and high NDVI classes for the three studied years. The final plant stand was the same between all NDVI classes for 2001 and 2003 as it was expected due to the conventional seeding application with the same rate of seeds for the entire field.
Resumo:
The aim of this work was study the selectivity of insecticides in favor of natural enemies in cotton (Gossypium hirsutum latifolium Hurtch Lr), DeltaOpal cultivar, in the city of Malhada (BA), and to know the associated beneficial fauna. The study was conducted at the agricultural year of 2010/2011. The design was conducted in randomized blocks with six treatments and four replications. The treatments were: (1) Fipronil 200 SC (0.38 L.ha-1); (2) Alphacypermethrin 100 SC (0.30 L.ha-1), (3) Lufenuron 50 EC (0.30 L.ha-1), (4) Imidacloprid 200 SC (0.30 L.ha-1), (5) Methyl parathion 600 EC (1.00 L.ha-1), and (6) control (water). The product was applied 80 days after emergence, and the evaluations were performed one day before application and 1, 7 and 14 days after application (DAA). The samples were taken using the sampling method beating cloth and Moericke traps. Natural enemies were brought to the laboratory for sorting, counting and identification by family. The toxicity of the products ranged according to the group of natural enemies. Imidacloprid is selective to the spiders and insecticides are moderately toxic (Methyl Parathion and Alphacypermethrin: 1 and 14th DAA; Lufenuron: 14th DAA) or toxic (Fipronil and Alphacypermethrin: 7th DAA). Fipronil (1 DAA), Alphacypermethrin (7th DAA) and Methyl Parathion (14th DAA) are moderately toxic to adult ladybirds. The analyzed insecticides are toxic to the larvae of ladybirds, with more impact until seven days after the application, with the exception of Methyl Parathion classified, as innocuous until this period. The occurrence of 13 families of spiders and 18 families of parasitic Hymenoptera is registered in cotton agroecosystems in the region of Malhada, in the state of Bahia.
Resumo:
This study was conducted at University of Marília, São Paulo State, Brazil, aiming to determine the phase of intake transition between exclusively liquid diet (milk) and diet based on milk, grass and/or ration by lambs by δ13C technique. Six Suffolk crossbreeding lambs were distributed in a totally random design (3x2), with two experimental groups and three replications. At the first one, lambs were penned and sucked milk from dams fed with C4 diet. besides, they had access to C3 ration in creep feeding, since their birth. At the second group, lambs were kept on a paddock with Tifton – 85 grass (C4 photosynthetic way) as well as their dams and had access to C3 ration in creep feeding, since their birth. The C3 ration contained soybean meal, ground oat grains, lucerne hay and also mineral salt. The penned lambs’ ration consumption overcame the milk intake at 30-35 days after birth; however, grazing lambs ingested more milk and pasture than ration until 40 days after birth. The δ 13C technique was considered effective on studies of lambs feeding behavior.
Resumo:
The application of extrusion technology in the food industry has enabled the development of new commercial products of fast preparation, and maintaining the nutritional characteristics after the process. During this process there are changes in raw material due to the action of temperature, humidity and mechanical friction resulting in a modified product which can be used in various industrial applications. This work aimed to evaluate the effect of the composition of the raw material and operating conditions of the extrusion process on the properties of paste and thermal properties in the development of a functional instant flour of cassava and soybean. The results showed significant effects of all operating parameters on the rheological properties studied. The extruded flours showed no residual gelatinization enthalpy, suggesting that the starch in the samples was gelatinized. The experimental conditions of the smallest percentages of cassava residue (10%) and high soybean flour (25%) mixed with cassava starch, extrusion temperature of 75ºC and low screw speed (170rpm) leads to obtain instant flour with desirable characteristics.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)