Avaliação da infiltração marginal de três cimentos endodônticos após preparo para retentor de acordo com o momento do preparo

Objetivo: o objetivo desse estudo in vitro foi avaliar a infiltração marginal coronária após o preparo para retentor em dentes obturados com três diferentes cimentos, de acordo com o período entre a obturação do canal radicular e o preparo para retentor. Métodos: Noventa dentes humanos recentemente extraídos foram limpos e instrumentados e, então, obturados com Sealapex, Endométhasone ou TopSeal. Brocas Gates-Glidden foram utilizadas para o preparo imediato de 10 dentes de cada cimento até manter 5mm de obturação remanescente. Sessenta raízes obturadas foram incubadas a 37°C em meio úmido por 30 e 60 dias para serem, depois, preparadas para os retentores como descrito anteriormente. A superfície externa de cada raiz foi coberta com Araldite. Os espécimes foram imersos em corante azul de metileno a 2% sob vácuo por 24h, para então poderem ser analisados. A infiltração foi mensurada pelo software Sigma Scan da parte superior da obturação à porção apical alcançada pelo corante. Resultado: o Sealapex e o TopSeal apresentaram menor infiltração após o preparo para retentor do que o Endométhasone. O preparo imediato para o retentor apresentou menor infiltração do que o preparo para o retentor após 30 e 60 dias da obturação do canal radicular.

Estudo clínico retrospectivo de restaurações cerâmicas do tipo laminado sobre dentes com ou sem preparo dentário: 1 a 5 anos de acompanhamento

Pós-graduação em Odontologia - FOA

Avaliação de métodos de proteção para taludes em estrada não-pavimentada

This work presents the results of the efficiency of three protection methods of roads slopes, against the development of erosion processes.The methods anlyzed were: (1) grass planting "San Carlos" (Axonopus compressus), (2) litter, composed of remains of branches and leaves of eucalyptus E. Grandis, and (3) Compacted soil cover with a local soil with properties more resistant to erosion processes.The experiment consisted of assembly of four rectangular cells with 6 meters, three for protection systems in study and one was kept unprotected to evaluate the efficiency of the methods in study.The determination of the amount of eroded sediment was based on the sum of the solids in suspension and stored sediments in the geotextile bags.The results showed that, compared to the unprotected cell, the litter obtained a reduction of soil loss of 90%, while the grass enveloped and reduced 80% and 65% respectively.

Comparação de métodos de estimativa da evapotranspiração de referência para região de Jaboticabal-SP

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Efeito de dois sistemas de manejo do solo nas propriedades físico-hídricas, desenvolvimento radicular e produtividade do milho

Corn cultivation is part of crop rotation used by irrigation farmers from the southwestern region of São Paulo state, Brazil, who use no-tillage soil management as a kind of sustainable use of soil. The effect of this conservative practice on physical and hydrical properties of the soil, root development and corn crop yield compared to the conventional management was the objective of this work. The experiment was held at the Buriti-Mirim Farm, Angatuba, SP, Brazil, using an irrigated area with a center pivot system and two types of soil management: conventional and no-tillage systems. Although the no-tillage management had higher soil density and less water availability, no significant difference was found for both management systems concerning soil resistance to penetration, root development and crop yield. In both systems of soil management, 90% of roots were concentrated in the first 0-20cm of soil layer.

Cultivo da cana-de-açúcar e o uso do solo em áreas de preservação permanente

This study aimed to recognize the significant temporal changes in land use between 1984 and 2008 in Barra Bonita City/ SP and to analyze the conflicts of land use in permanent preservation areas (PPA) with reference to the Forest Code and Resolution N. 303/2002 of CONAMA. The GIS Idrisi Andes 5.0 – geographic information system was used and the images were processed by LANDSAT TM5. Maps of land use were obtained by Maxver supervised classification and showed that in 1984 the area occupied by sugar cane crop was about 10.50 ha (70%) in 1984 and 10.90 ha in 2008. In analysis of conflicts about land use in permanent preservation areas showed that in 24 years the sugar-cane crops increased 3.6% on PPA. The occupation was represented by adequate forest of 279.25 ha (31.5% of total) in 1984. In 2008, the sugar-cane crop was the biggest conflict in PPA occupying 357.9 ha and 11.4% corresponds to areas in preparation for use. This year, 59.5% of total PPA is at odds with environmental legislation.

Demanda energética em diferentes manejos de solo e híbridos de milho

This study aimed to account the energy balance of six different farming systems: CMT (minimum tillage with transgenic corn); CMNT (minimum tillage with non-transgenic corn); PCT (conventional tillage with transgenic corn); PCNT (conventional tillage with non-transgenic corn); PDT (no-tillage system with transgenic corn) and PDNT (no-tillage system with non-transgenic corn). The study was carried out at the Experimental Farm Lageado FCA/Unesp, Botucatu - SP. The energy balance was performed by subtracting the total energy inputs by the total energy output. Energy efficiency was calculated by dividing the total energy output by the total energy inputs. The total values ​​of energy inputs and outputs were expressed in MJ.ha-1 (mega joules per hectare). To calculate the energy inputs were accounted the fuel consumption and lubricants, depreciation energy of machinery and implements, manpower and agricultural inputs. The energy outputs were calculated according to the maize yield. The result shows that the system PDT was the system that had better energy efficiency and the system that had the lowest efficiency was the PCT system. The system with lower energy demand was the PDT and the greatest demand was PCNT.

Mapeamento, erodibilidade e tolerância de perdas de solo na sub-bacia do Ribeirão das Perobas

The land use conservation planning requires knowledge of the soil characteristics, natural susceptibility to erosion and the soil loss limit. In this context, the objectives of this study were to perform a detailed soil survey of Ribeirão das Perobas watershed, located in Santa Cruz do Rio Pardo, São Paulo State and to determine and map the erodibility and soil loss tolerance of the soil classes found in the survey. The following techniques were used to perform the detailed soil survey: photopedology, field sampling, physical analysis, chemical analysis, and morphological description of the soil samples and profiles. The erodibility was determined by the methods described by Denardin (1990) and Mannigel et al. (2002), and the determination of soil loss tolerance followed the methodology of Mannigel et al. (2002). The results of erodibility determined by the methodology of Denardin (1990) were not discrepant and they did not distinguish soils that are known to have different susceptibility to erosion., w\Whereas, using the methodology of Mannigel et al. (2002), very high or very low erodibility values were observed in soils with extreme contents of sand silt or clay. The most influent variable to the soil loss tolerance results was the correction factor for the textural gradient of clay between soil horizons.

Alterações nuricionais em casca e polpa de cenoura decorrentes de diferentes métodos de cozimento

The aim of this study was to verify the carrot cooking most suitable method to minimize nutrient losses. Carrot peel slices were subjected to pre cooking tests that were initiated with 0.5 min of duration and then increased in 0.5 min successively. The carrot pieces texture was monitored during the pre tests so all would havethe same texture independent of the type of cooking. The degree of softennes was evaluated by pressuring the pieces between the toes. The carrot pulp and pell were subjected to four types of heat treatment (pressure, immersion, microwave, and steam), after that they were pounded with a food processor and stored at -18 ºC. The nutritional analyses were as follow: The evalu determination of proteins, lipids, fibers, sugars reducers, total of ascorbic acid content and minerals (iron, calcium, zinc, magnesium, potassium, phosphorus, and calcium). The analyses were accomplished with fresh carrot and after cooking with the different methods. The peel of the carrot presented as amounts of proteins, lipids, fibers percentages, sugars reducers, total and ascorbic acid content equivalent to the pulp. In addition, the minerals content was superior in the peel in relation to the pulp, presenting respective percentages of 38,10%, 95,12%, 47,04%, 58,88%, 70,27% and 21,27%. There were nutrient losses in relation to the raw vegetable, when the carrot pieces were submitted to the different cooking methods. The methods of steaming and microwave had lower nutritional losses.

Métodos de controle químicos e físicos de Marchantia polymorpha

Marchantia polymorpha develops under environmental conditions of high relative humidity and shading. As this habitat is the usually used in nurseries for the growth of seedlings of native tree species that species grows very quickly among developing tree seedlings and causes severe losses. This study was undertaken viewing more efficient either physical or chemical methods for the control of M. polymorpha. Two experiments were conducted under greenhouse conditions. In the first acetic acid (10, 20, and 40% of concentration), oxygenated water (50 and 100%) and the herbicides glyphosate (1,680 g AI ha) and fomesafen (375 g AI ha-1 ) were applied to the seedlings. In the second, the treatments consisted of soil previously submitted to a temperature of 105 °C for 48 hours, soil submitted to solarization in black plastic and in transparent plastic bags for 30 days, preemergence application of diuron (1,750 g AI ha-1 ) and trifluralina (1,575 g AI ha-1 ). The visual evaluations of the methods were performed 7, 14, 21, and 28 days after the application (DAA) and at 60 and 120 DAA, respectively, for the first and the second experiment. Only diuron and trifluralina resulted in a 100% control of M. polymorpha 120 DAA.

Avaliação de contaminação com óleo diesel por meio dos métodos de Eletrorresistividade e Polarização Induzida em Santa Ernestina-SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da mobilidade de micotoxinas em solo sob condições de clima tropical

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Previsão da capacidade de carga de estacas escavadas em solo arenoso da região de Araquari-SC

In Geotechnical engineering the foundation projects depend on the bearing capacity and the acceptable displacements. One of the possible ways to predict the bearing capacity of foundations is through semi-empirical statistical methods which correlate in-situ tests (SPT and CPT). The piles breaking loads are defined by the interpretation of the load x head displacement curve and the experimental data acquired through the load test. In this work it is studied the behavior of bored piles executed in the Araquari/SC region, comparing the bearing capacity values predicted by the methods DECOURT & QUARESMA MODIFICADO (1996), AOKI & VELLOSO MODIFICADO MONTEIRO (2000), MILITITISKY E ALVES (1985), DECOURT & QUARESMA (1978), MÉTODO DE AOKI & VELLOSO (1975) e PHILOPANNAT (1986), with the results of the load test, evaluating their differences and discussing parameters that have direct effects on the prediction

Simulação da suspensão tipo duplo A de um veículo off-road através do histórico de excitação do solo

The search for mechanical components validation methods, employed in product development sector, becomes more avid for less expensive solutions. As a result, programs that can simulate forces acting on a given part through finite element method are gaining more space in the market, once this process consumes less capital when compared to currently-employed empirical validation. This article shows the simulation of an off-road prototype suspension through such technique, using ground excitation history coming from field measurements and also by making use of a specific tool for obtaining dynamic loads from the model in question. The results shown at the end is key for future enhancements aiming mass reduction, for example, that may be executed on the prototype suspension system discussed here