Effect of intrinsic nanoparticle pigmentation on the color stability of denture base acrylic resins

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Characterization of methicillin-resistant coagulase-negative staphylococci in milk from cows with mastitis in Brazil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of Surface Conditioning Modalities on the Repair Bond Strength of Resin Composite to the Zirconia Core / Veneering Ceramic Complex

Purpose: This study evaluated the effect of different surface conditioning protocols on the repair strength of resin composite to the zirconia core / veneering ceramic complex, simulating the clinical chipping phenomenon.Materials and Methods: Forty disk-shaped zirconia core (Lava Zirconia, 3M ESPE) (diameter: 3 mm) specimens were veneered circumferentially with a feldspathic veneering ceramic (VM7, Vita Zahnfabrik) (thickness: 2 mm) using a split metal mold. They were then embedded in autopolymerizing acrylic with the bonding surfaces exposed. Specimens were randomly assigned to one of the following surface conditioning protocols (n = 10 per group): group 1, veneer: 4% hydrofluoric acid (HF) (Porcelain Etch) + core: aluminum trioxide (50-mu m Al2O3) + core + veneer: silane (ESPE-Sil); group 2: core: Al2O3 (50 mu m) + veneer: HF + core + veneer: silane; group 3: veneer: HF + core: 30 mu m aluminum trioxide particles coated with silica (30 mu m SiO2) + core + veneer: silane; group 4: core: 30 mu m SiO2 + veneer: HF + core + veneer: silane. Core and veneer ceramic were conditioned individually but no attempt was made to avoid cross contamination of conditioning, simulating the clinical intraoral repair situation. Adhesive resin (VisioBond) was applied to both the core and the veneer ceramic, and resin composite (Quadrant Posterior) was bonded onto both substrates using polyethylene molds and photopolymerized. After thermocycling (6000 cycles, 5 degrees C-55 degrees C), the specimens were subjected to shear bond testing using a universal testing machine (1 mm/min). Failure modes were identified using an optical microscope, and scanning electron microscope images were obtained. Bond strength data (MPa) were analyzed statistically using the non-parametric Kruskal-Wallis test followed by the Wilcoxon rank-sum test and the Bonferroni Holm correction (alpha = 0.05).Results: Group 3 demonstrated significantly higher values (MPa) (8.6 +/- 2.7) than those of the other groups (3.2 +/- 3.1, 3.2 +/- 3, and 3.1 +/- 3.5 for groups 1, 2, and 4, respectively) (p < 0.001). All groups showed exclusively adhesive failure between the repair resin and the core zirconia. The incidence of cohesive failure in the ceramic was highest in group 3 (8 out of 10) compared to the other groups (0/10, 2/10, and 2/10, in groups 1, 2, and 4, respectively). SEM images showed that air abrasion on the zirconia core only also impinged on the veneering ceramic where the etching pattern was affected.Conclusion: Etching the veneer ceramic with HF gel and silica coating of the zirconia core followed by silanization of both substrates could be advised for the repair of the zirconia core / veneering ceramic complex.

High genetic diversity among Pseudomonas aeruginosa and Acinetobacter spp. isolated in a public hospital in Brazil

In Brazil and other regions of the world, Pseudomonas aeruginosa and Acinetobacter spp. have emerged as important agents of nosocomial infection and are commonly involved in outbreaks. The main objective of the present study was to evaluate the genetic relationship among P. aeruginosa and Acinetobacter spp. isolated from patients in a public university hospital in northwestern Parana, Brazil, and report their antimicrobial resistance profile. A total of 75 P. aeruginosa and 94 Acinetobacter spp. isolates were phenotypically identified and tested for antibiotic susceptibility using automated methodology. Polymyxin B was tested by disk diffusion for P. aeruginosa. Metallo-beta-lactamase (MBL) was detected using a disk approximation test. Genotyping was performed using enterobacterial repetitive intergenic consensus polymerase chain reaction (ERIC-PCR). Approximately 55% of the P. aeruginosa isolates and 92% of the Acinetobacter spp. isolates were multiresistant, but none were MBL-producers. ERIC-PCR revealed the presence of small clusters of carbapenem-resistant Acinetobacter spp., most likely OXA-type carbapenemase producers. Furthermore, high genetic diversity in P. aeruginosa and Acinetobacter spp. clinical isolates was observed, suggesting that cross-transmission is not very frequent in the studied hospital.

Non-destructive thermal wave method applied to study thermal properties of fast setting time endodontic cement

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito de sistemas de manejo do solo e velocidade de semeadura no desenvolvimento do sorgo forrageiro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Prevalence of uropathogens and antimicrobial susceptibility profile in outpatient from Jataí-GO

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Propriedades físicas de latossolo e argissolo em função de práticas de manejo aplicadas na entrelinha da cultura da seringueira (Hevea brasiliensis)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Spatial heterogeneity affecting fish fauna in cascade reservoirs of the Upper Parana Basin, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Unusual broadening of the NIR luminescence of Er3+-doped Nb2O5 nanocrystals embedded in silica host: Preparation and their structural and spectroscopic study for photonics applications

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Exogenous bacterial osteomyelitis in 52 dogs: a retrospective study of etiology and in vitro antimicrobial susceptibility profile (2000-2013)

Background: Most clinical cases of osteomyelitis in dogs involve infectious agents, especially bacteria and fungi. The characterization of these microorganisms may aid in the prevention and treatment of disease.Objective: The aim of this study was to evaluate retrospectively microbiological cultures and in vitro antimicrobial susceptibility profile of isolates from 52 cases of bacterial osteomyelitis in long bones of dogs over 2000-2013. In 78% of the cases injuries were caused by a motor vehicle accident, but there were a few cases of dog bites (17%) and ascending infection due to pododermatitis (5%).Animals and methods: The isolated microorganisms were identified based on conventional phenotypic methods. In vitro disk diffusion test was performed using 30 different antimicrobials.Results: The isolates were obtained from femur (28%), humerus (16%), tibia (31%), and radius/ulna (25%). Among 52 cases, culture was positive in 88% of cases. Thirteen genus of different species of microorganisms were isolated. The most common microorganisms isolated were Staphylococcus spp. and Escherichia coli followed by Streptococcus spp., enteric bacteria, Corynebacterium sp. and anaerobic bacteria. In 42% of cases cultures were mixed. The most effective drugs against isolated bacteria were amoxicillin and clavulanate potassium (79%) followed by ceftriaxone (69%). High-resistance rates were documented against azithromycin (80%), penicillin (59%), and clindamycin (59%).Conclusions: The present study highlights diverse etiologic agents in cases of infectious bacterial osteomyelitis, with predominance of Staphylococcus genus, and reinforces the importance of obtaining cultures and susceptibility profiles given the high rates of antimicrobial resistance.

Effect of Ceramic Thickness and Shade on Mechanical Properties of a Resin Luting Agent

Purpose: This study aimed to investigate the influence of ceramic thickness and shade on the Knoop hardness and dynamic elastic modulus of a dual-cured resin cement.Materials and Methods: Six ceramic shades (Bleaching, A1, A2, A3, A3.5, B3) and two ceramic thicknesses (1 mm, 3 mm) were evaluated. Disk specimens (diameter: 7 mm; thickness: 2 mm) of the resin cement were light cured under a ceramic block. Light-cured specimens without the ceramic block at distances of 1 and 3mm were also produced. The Knoop hardness number (KHN), density, and dynamic Young's moduli were determined. Statistical analysis was conducted using ANOVA and a Tukey B rank order test (p = 0.05).Results: The bleaching 1-mm-thick group exhibited significantly higher dynamic Young's modulus. Lower dynamic Young's moduli were observed for the 3-mm-thick ceramic groups compared to bleaching 3-mm-thick group, and no difference was found among the other 3-mm groups. For the KHN, when A3.5 3-mm-thick was used, the KHN was significantly lower than bleaching and A1 1-mm-thick ceramic; however, no difference was exhibited between the thicknesses of the same shade.Conclusions: The dual-cured resin cement studied irradiated through the 1-mm-thick ceramic with the lightest shade (bleaching ceramic) exhibited a better elastic modulus, and there was no effect in KHN of the resin cement when light cured under different ceramic shades and thicknesses (1 and 3 mm), except when the A3.5 3-mm-thick ceramic was used.Clinical Significance: Variolink II irradiated through ceramic with the lowest chroma exhibited the highest elastic modulus; therefore, the light activation method might not be the same for all clinical situations.

Mielografia lombar no diagnóstico de extrusão do disco intervertebral toracolombar em cães: estudo prospectivo

Thoracolumbar disk extrusion is the most common cause of extradural compression of the spinal cord in dogs. Myelography is one of the most commonly performed techniques for the diagnosis of this affection. This study aimed to evaluate the applicability and effectiveness of lumbar myelography in the diagnosis of thoracolumbar intervertebral disk extrusion in dogs, as well as its major complications. Twenty dogs were used in this study. Animals were included when neurological examination suggested thoracolumbar spine lesion, myelography was used as a complementary diagnostic method, and diagnosis of disk extrusion was surgically confirmed. The accuracy of the exam to predict location and lateralization of extruded disk material were evaluated, as well as complications associated to the procedure. Lumbar myelography exhibited 95% and 60% accuracy for location and lateralization of the lesion, respectively, with minimal complications.

Complex modal analysis of a slender vertical rotor by finite elements method

In this paper, natural frequencies were analyzed (axial, torsional and flexural) and frequency response of a vertical rotor with a hard disk at the edge through the classical modal and complex analysis. The equation that rules the movement was obtained through the Lagrangian formulation. The model considered the effects of bending, torsion and axial deformation of the shaft, besides the gravitational and gyroscopic effects. The finite element method was used to discretize the structure into hollow cylindrical elements with 12 degrees of freedom. Mass, stiffness and gyroscopic matrices were explained consistently. The classical modal analysis, usually applied to stationary structures, does not consider an important characteristic of rotating machinery which are the methods of forward and backward whirl. Initially, through the traditional modal analysis, axial and torsional natural frequencies were obtained in a static shaft, since they do not suffer the influence of gyroscopic effects. Later research was performed by complex modal analysis. This type of tool, based on the use of complex coordinates to describe the dynamic behavior of rotating shaft, allows the decomposition of the system in two submodes, backward and forward. Thus, it is possible to clearly visualize that the orbit and direction of the precessional motion around the line of the rotating shaft is not deformed. A finite element program was developed using MATLAB (TM) and numerical simulations were performed to validate this model. Natural frequencies and directional frequency forced response (dFRF) were obtained using the complex modal analysis for a simple vertical rotor and also for a typical drill string used in the construction of oil wells.

Desenvolvimento de nanopartículas de quitosana para adminstração nasal de zidovudina

Zidovudine (AZT) is the drug most commonly used in AIDS treatment, isolated or in combination with other antiretroviral agents, but it has certain limitations due to its therapeutic dose-dependent haematological toxicity. In addition, it has low oral bioavailability, since it undergoes pre-systemic metabolism. The nasal route has been used as an alternative route for drug administration, because it can promote its direct absorption to blood circulation, avoiding hepatic metabolism. However, this route presents as a factor limiting the mucociliary clearance mechanisms that remove quickly the formulation of the nasal cavity. To prolong the residence time of formulations, in this direction, has been proposed the development of mucoadhesive systems. Among the various existing systems, the use of chitosan (QS), as mucoadhesive polymer, has been widely exploited in the preparation of nanoparticles (NPs). The objective of this study was to develop and characterize QS’s NPs for intranasal administration of AZT. For both NPs have been developed by ionic crosslinking of QS with sodium tripolyphosphate (TPP). These NPs were characterized by studies of particle size distribution, zeta potential, morphology, mucoadhesion tests, assessing the ability of encapsulation of the drug and permeation profile of AZT. The evaluation of AZT in the NPs was determined by UV-Vis spectroscopy. Mucoadhesion measures were made using a texture analyzer, using a mucin disk and porcine mucous membrane , and permeation assay were conducted using porcine nasal mucous membrane adapted to the Franz cell. These results suggest that the systems in hand have great potential for nasal AZT administration