408 resultados para Minimização de resíduos
Resumo:
The study of mathematical modeling assists in evaluation of the capacity of production and measurement of generation time of biogas in landfills, enabling the implantation of projects of energy generation from methane. Thus, the work aims, by simulating scenarios of potential methane generation in the landfill in Rio Claro, the use of field data from methane flow and waste grounded parameters as references for selecting values of k e L0 used to estimate methane generation model in LandGEM. As a result it was found that compared the characteristics adopted in the four scenarios recommended by the USEPA literature with those found in the landfill of Rio Claro (high amount of organic matter in the waste landed and daily practice of leachate recirculation), the scenario that apparently better represent the rate of methane generation is the scenario 01, with k = 0.7 and L0 = 96. Now, the adjustment of parameters in relation to the data field of methane flow, the value of L0 which best fits the methane generation from the landfill in Rio Claro is 150, while for k the line behavior that best represents the reality are values between 0.7 and 0.3. Regarding the parameters of the waste grounded, between the suggested values of k, 0,3 is most consistent with the intermediate level of biological degradation of the residue grounded, while L0 due to the biodegradability of the waste, a new value between 120 and 150 may be more appropriate for the study
Resumo:
This research was mainly focused on public policy analysis of solid waste, and the National Policy and State Solid Waste, as well as determining the performance of the Blue Green Municipality strategic project in relation to the management of municipal solid waste in Regente Feijó, São Paulo. The objective of this research was to analysis of the consequences of the deployment project of selective collection and integration of recyclable material collectors in an association of collectors, called the Association of Recyclable Material Collectors Rock, held in the city from the year 2008, with effective implementation in 2010. We analyzed the actions of the municipal government since the implementation of selective collection, to the development of the Association. The methodology used was literature concerning the issue; routine field surveys to monitor the activities in the landfill and association of collectors, collecting data from questionnaires appropriate to the research topic. We sought to examine old and new forms of urban solid waste management, the evolution of the historical process of this issue in the city and its social and environmental impacts, and the collectors the main social actors in this process. The complexity that addresses this issue was dealt with in this dynamic study, analyzing all parts involved
Resumo:
Health Care Waste (HCW) represents 1%, and it has presently gained a lot of importance. Adequate management is one of the great challenges to be faced by health care centers. It has gained distinction and been widely discussed by members of the sectors involved with sanitation, public health and environmental issues due to waste physical, chemical biological characteristics, which pose potential risk to the environment and public health. The present study aims at evaluating HCW internal management by following all its phases, determining indicators, classifying and quantifying, establishing production rates (kg /patient/day) for the sector and designing materials to disseminate appropriate HCW disposal in the Emergency Room of the UNESP University Hospital in the city of Botucatu according to the guidelines presently in force. : From June to October 2011, the waste flow was observed from its production to final disposal. Four weight measurements were performed on four consecutive days in the month of August by using a properly calibrated (in grams) digital scale at the times scheduled for collection of the produced waste. Hence, the daily and monthly amounts were estimated according to their classification. All the waste packaged in the bags in garbage cans in the Emergency Room for a 24-hour period was considered to be a sample. Separation was not adequately performed in that sector, and waste from Group A was mixed with that from Group D. The amount of infectious waste produced in the sector corresponded to 87.80 %, common waste to 10.93 % and recyclable waste to 1.27%. The mean daily HCW production was of 123.300 kg/day, and the total monthly production was of 3,822 kg/month, which was distributed as follows: Group A 3,355,750 kg/month; Group D 417,570 kg/month and recyclables 48,670 kg/month. The production rate corresponded to 0.47 kg/patient/day, thus showing... (Complete abstract click electronic access below)
Resumo:
The problem of solid waste has caused discussions about the huge amount that is generated in Brazilian cities, in particular the waste from construction and demolition (CDW), called spoil. In many cases these wastes are disposed of improperly and even criminally in urban areas, causing serious economic, social and environmental problems. Due to the lack of public policies and appropriate management of such waste came up with the CONAMA, in its resolution nº 307 of 2002, the obligation of municipalities in deploy the integrated management of construction and demolition wastes for the resolution of problems caused by inadequate management and disposal of such waste. By following a methodology suggested by Pinto & González (2005), with adaptations of other authors, it is proposed in this work the lifting of a diagnosis of the CDW in the municipality of Guaratinguetá-SP, through theoretical analysis and field research, with purpose to guide the public servants in the elaboration and implementation of integrated management. The results must contain information necessary for that end, such as the knowledge of generators, agents, collectors and transporters, disposition areas and the disposal of waste
Resumo:
The organic wastes need to be adequately managed, in order to avoid the environmental pollution and damage to the public health. So, this work aimed to study the composting process using two methods: manual and mechanized, for the treatment of bovine ruminal waste. This residue is generated in large proportions during the bovine slaughter process, and it can lead environmental degradation and contamination, or even damage to the public health, when not treated. For the initial adjustment of the composting parameters, it was incorporated the residue of coffee husks. The manual composting system was done by the manually aerated piles, while the mechanized composting system was done in a reactor coupled to a compressor that enabled the aeration of the system. The proportions used in both systems were: 90% bovine rumen (R) and 10% coffe husks (CC); 85% bovine rumen and 15% coffe husks; 80% bovine rumen and 20% coffe husks. The parameters determined during the monitoring of the composting process were: temperature, pH, moisture, organic matter, ash, organic carbon, Kjeldahl nitrogen and C/N ratio. The results obtained during the monitoring of the piles and reactors presented similar behavior, except for the parameters Kjeldahl nitrogen and C/N ratio. When compared to the “Instrução Normativa no 25 de 23/07/2009 do Ministério da Agricultura, Pecuária e Abastecimento”, the organic produced composts with the best results were: pile 2 (85% R; 15% CC) and reactors 1 (90% R; 10% CC) e 2 (85% R; 15% CC)
Resumo:
Taking as starting the environmental, social and economic impact of construction and demolition waste in Brazilian cities were created legal mechanisms for management and administration, seeking to minimize the impacts to the maximum, since the irregular deposition can be characterized as environmental crime. CONAMA Resolution No. 307 of 2002 establishing the mandatory implementation of an Integrated Management System Construction Waste and Demolition, guiding the classification and designation of the waste generating agents, collection agents and transporters, and the areas of culling and disposal of waste. The technical partnership between the Ministry of Cities, the Environment Ministry and the Caixa Econômica Federal, coordinated by Pinto & Gonzales (2005) Management in the work and management of construction waste, proposed a guidance manual to guide the implementation of a System Integrated Management of Construction Waste in Municipalities. The municipality of Guanambi in the state of Bahia, in full economic rise, lacks a waste management of construction and demolition, since there has areas for the disposal of waste being proposed in this paper the diagnosis of waste generation in the municipality as part of the methodology proposed by the work of Pinto & Gonzales (2005).
Resumo:
As new technologies improve, people’s lives gain in comfort and accessibility. However, along with these technologies comes a growth in “soon to fall into disuse” product consume, either because they have reached the end of their life cycle, or because they were substituted by newer and more advanced models. These electronic wastes are still with no certain destination, and could be donated to welfare companies, but the majority is thrown in wide open dumping grounds or landfills, where they can contaminate water and soil with their toxic components. This work seeks to evaluate the e-waste concept, their impacts in the environment and human life, as well as the current national and international e-waste management and destination, finally reflecting on international decisions that would be appropriate for the Brazilian system.
Resumo:
This work presents the objective of producing organic fertilizer from the waste generated at FCT/UNESP and its use in the growing sunflower. For this, there were collected wastes of pruning/weeding and organic waste from the canteen. It were made two types of treatments, one conventional and the other mechanized, using three mass ratios: ratio 1 (30% wastes of pruning/weeding (RP) + 70% organic waste (RC)), ratio 2 (50% RP + 50% RC) and ratio 3 (70% RP + 30% RC). The conventional system was done windrow with turning manual and the mechanized system was developed in reactors by injecting compressed air. The compounds produced were analyzed in terms of pH, organic matter, organic carbon, mineral residue, nitrogen, phosphorus and potassium, which could be compared to the values stipulated by the Instrução Normativa n° 25 de 23/07/2009 do Ministério da Agricultura, Pecuária e Abastecimento. The compounds produced were used on growing sunflowers in 14 different conditions for the systems manual and mechanized, totaling 26 treatments with the following proportions... (Complete abstract click electronic access below)
Resumo:
The present work aimed to study the composting process using two methods of treatment, conventional and mechanized for the treatment of pruning/weeding waste and organic waste generated in the canteens of the FCT/UNESP. For this work, it was quantified the generation of the waste However, of the tests with pure organic compound, which had the best result was T1 - 70% RPC / 30% ROC, again indicating the feasibility of applying this condition in scales at the campus. The conventional treatment by composting was carried out on manual aerated piles: 70% residue pruning/weeding (RPC) and 30% organic waste from the canteen (ROC); 50% RPC / 50% ROC, 30% RPC / 70% ROC. The mechanized system consisted of a reactor of 190 liters – 50% RPC / 50% ROC, with air injection from a compressor for 15 minutes daily. The parameters characterized and monitored were pH, organic matter, organic carbon, ash, nitrogen kjedahl and phosphorus. The temperature measurements were taken daily by a digital thermocouple (top, middle and base of the piles and reactor)... (Completo abstract click electronic access below)
Resumo:
CONAMA Resolution 307 / 02, in Article 4, states that the primary goal of those involved in the reuse process of construction and demolition waste is not the generation of such wastes, secondarily is the reduce, reuse, recycling and proper disposal of such material. The disposal problem of large volumes of waste generated coupled with the scarcity of natural resources and environmental degradation involved in the extraction process of such materials resulted in several studies, that after many analyzes proposed various forms of reuse and recycling . The NBR 15.116/04 provides requirements for the use of recycled aggregates in paving and concrete without structural function. This work aims to show the usage potential of recycled aggregates from waste generated in construction and demolition sampled Group AB Areias, Pindamonhangaba (SP) in order to meet the standards in Brazil, as well as the environmental contribution by reducing the use of raw materials extracted from nature. After stabilization and particle size analysis of the California Bearing Ratio and Proctor, obtained mixtures of recycled aggregates showed higher values submitted by the minimum standards related, with excellent potential for use in paving
Resumo:
The mechanical garages do varied types to activities related to the reparation from vehicles such as change from Motor oil, change and cleaning from car pieces, motor rectification, among others. These activities generate different kinds of waste and wastewater that when disposed in an inappropriate way can pollute the environmentand cause risks to the public health. Despite the environmental issues that involves these enterprises, they aren´t object of environmental licensing and there are any rules that regularizes their activities with the goal of these possible environmental impacts mitigation. The environmental diagnosis proposed by the present work has as goal the knowledge of the possible environmental aspects and their effects in the environment, for establishing control measures and from that to generate subsidy for environmental normatization of the sector in the municipal level. Furthermore, it should also define practices as waste production reduction, separation of them at the generator source and convenient final disposal, as well as wastewater production reduction and treatment of them before its launching in the wastewater network. The environmental diagnosis was based on a survey realized in garages from the city of São Carlos – SP, in order to define the more important characteristics of this activity that are related to the environment and public health. From the obtained information from the survey and the interpretation of the data, subsidy for the municipal environment management of the mechanical garages were generated.
Resumo:
Esta pesquisa tem como objetivo levantar a literatura sobre economia do meio ambiente e suas linhas de pensamento, para comparar sua aplicabilidade em relação às políticas públicas relacionadas à gestão de resíduos sólidos. No primeiro capítulo são apresentadas as principais correntes da economia do meio ambiente. A seguir, no capitulo segundo, colocamos o Brasil no cenário da problemática ambiental, e então, dos resíduos sólidos, contemplando as legislações vigentes no Estado de São Paulo e no Brasil, além de introduzir o conceito do resíduo sólido. O capítulo final apresenta os resultados país por fontes especializadas nos últimos anos, e a tendência que as políticas públicas poderiam seguir para uma melhor gestão dos resíduos sólidos
Resumo:
The present work is the analysis of the practices and techniques currently used in the final allocation given to organic household solid waste in the city of Rio Claro - SP. As the major part of Rio Claro’s household solid waste is formed by the organic fraction, as well as in the rest of the country, this research proposes a study on what is done with that portion of the waste, its treatment and where finally destined, based on the National Solid Waste Politic, recently approved in 2010. With the use of this organic part, for example: as animal feed supplement or compost embodiment for the purpose of producing organic fertilizer, enables the decrease of the percentage of the total destined to dumps and landfills. This total percentage has already been reduced after the popularization of the beneficial recycling programs in Brazil, which are still growing. As cities and the purchasing power of its individuals grow, there is also a consequent growth of waste production by society. The household whether domestic solid waste are lower than Industrial Solid ( RSI ) waste for the production in million tons ( Mton ) quantities , however, those residues are more visible on a daily basis - in cities and periphery as well, due to the inadequate management, - and also offer , as well as industrial and agricultural wastes , several types of harmful effects to the population when managed incorrectly. Therefore, the research aims to assist in the study of Solid Waste Management (MSW) for efficient Urban and Environmental Planning in a midsize city. Thus, this project aims to analyze in the city of Rio Claro, how the allocation of these materials is done and whether these practices denote effective improvement regarding the proper management of waste, in the same way that the recycling chain would allow this effect
Resumo:
A consequence of population growth is the increased generation of solid waste, which requires environmentally and economically viable suitable disposal sites. The scarcity of such sites makes necessary to adopt non-generation measures, reduction, reuse , recycling and treatment of solid waste before final disposal of waste. This paper presents the quantification and qualification of organic waste generated in each sector of the University Restaurant (UR) , by proposing indicators of waste generation per meal (index of waste) . Then, from the characterization of the waste management practices adopted internally, evaluates the potential deployment of the composting process for organic waste, with signaling for opportunities to improve waste management. The diagnosis of waste generation was made based on data collected during the period of 10 days. The waste were classified into 3 groups (organic, recyclable and waste) in each sector of the restaurant ( pre preparation , kitchen and tray return) . The results reveal that 33 % of the waste generated in the UR currently has the potential to be composted in a suitable place on campus. Every meal served generat approximately 124g of waste, of which 35g are organic waste of the pre preparation sector, 49g are remnants of food in the tray’s return and 40g are other kinds of waste, including recyclable and non recyclable. You can still get a higher percentage of compostable if the trays pre-wash is not performed with detergent and water. To minimize the generation of waste trays can be replaced by plates and skimmers and ladles can be replaced by smaller ones. The food exposed in the counter but not consumed, can be distributed to students after the restaurant is closed so this material would not be disposed in the garbage
Resumo:
This work is proposed to evaluate the potential risk of an inert landfill in the city of Rio Claro (SP), and also suggest a source for the contamination. The study was proposed because it is known that there were legal technicalities greetings to guarantee the quality of groundwater. Given the requirements of the Environmental Company of São Paulo (CETESB) were installed monitoring wells in the area; sampled to groundwater and its contamination was found. In addition, we analyzed the main characteristics of the area, the arrangement and characteristics of the waste, the local geology and the hydrogeological system, so that I could find the source of contaminants, and predict the direction of dispersion even in groundwater. At the end of the work presents conclusions, recommendations and proposals for mitigating action