Caracterização morfológica do ramo, sementes e plântulas de matayba guianensis Aubl. e produção de mudas em diferentes recipientes e substratos

Matayba guianensis Aubl . is a shrubby or arborial Sapindaceae quite common in the Brazilian Cerrado with a key role in providing resources for ants and bees. It presents a rapid growth, and is important for the recovery of degraded areas, but little is known about its seedlings production. Therefore, the aim of this study was to describe the morphology of the branch and the seed germination and of seedling Matayba guianensis Aubl . in its post-seminal development and define the type of substrate and container suitable for seedling emergence and seedling production of this species. We evaluated three types of containers: black polyethylene bags, cartridge and polystyrene tray, with 5 kinds of substrates: sand, earth, earth - sand - manure (1:1:1); commercial substrate, and coconut fiber, with 4 replicates of 25 seeds per treatment . The branch, fruit, seed, seedling and their morphological events were described. The branch is cylindrical with paripinnate and alternate leaves, the fruit is dry and dehiscent. The seeds have a large amount of aryl, and the germination is cryptocotylar and hypogeal. The highest percentage of emergence occurred in styrofoam container with 91 % of the seeds germinated in commercial substrate , followed by coconut fiber (88 %). The development of root and stem were higher in tubes and plastic bags , using coconut fiber or commercial substrate.

NaOCl effect on biofilm produced by Staphylococcus aureus isolated from the milking environment and mastitis infected cows

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparison of shear bond strength of orthodontics brackets on composite resin restorations with different surface treatments

INTRODUÇÃO: frequentemente, os pacientes ortodônticos apresentam restaurações de resina composta; no entanto, existem poucos estudos que avaliam a melhor forma de colagem ortodôntica nessa situação. OBJETIVO: o objetivo do presente trabalho foi avaliar a força adesiva de braquetes ortodônticos em restaurações resinosas com tratamento de superfície. MÉTODOS: foram utilizados 51 incisivos inferiores bovinos divididos aleatoriamente em três grupos. No grupo controle (GC), os braquetes foram colados em esmalte dentário; nos grupos experimentais com tratamento (GCT) e sem tratamento (GST), os braquetes foram colados em restauração de resina previamente realizada, diferenciando-se pelo tratamento de superfície com broca diamantada. Os dentes foram incluídos em tubos de PVC com resina acrílica autopolimerizável. O ensaio de cisalhamento foi executado em máquina universal de ensaios Emic. Os grupos foram submetidos à ANOVA com pós-teste de Tukey para verificação da diferença estatística entre os grupos (α = 0,05). RESULTADOS: GC (6,62MPa) e GCT (6,82MPa) apresentaram resultados semelhantes, enquanto o GST (5,07MPa) obteve resultados estatisticamente menores (p < 0,05). CONCLUSÃO: conclui-se que a melhor técnica de colagem de braquetes ortodônticos em restaurações de resina composta é a de realização de desgaste sobre a superfície.

Tubos de concreto com adição de resíduos de borracha de pneu

Pós-graduação em Engenharia Civil - FEIS

Efeitos sobre as propriedades físico-químicas e atividade antimicrobiana de modificações na composição de um cimento de silicato de cálcio

Pós-graduação em Odontologia - FOAR

Avaliação da atividade antimicrobiana de um reembasador resiliente combinado a um polímero antimicrobiano sobre a formação de bio-filme

Pós-graduação em Reabilitação Oral - FOAR

The impact of the addition of iodoform on the physicochemical properties of an epoxy-based endodontic sealer

Due to the low radiopacity of Sealer 26, iodoform is frequently empirically added to this sealer. Thus, the interference of this procedure with the physicochemical properties of Sealer 26 must be evaluated. Objective: This study evaluated the influence of the addition of iodoform on setting time, flow, solubility, pH, and calcium release of an epoxy-based sealer. Material and Methods: The control group was pure Sealer 26, and the experimental groups were Sealer 26 added with 1.1 g, 0.55 g or 0.275 g of iodoform. Setting time evaluation was performed in accordance with the ASTM C266-03 speciflcation. The analysis of flow and solubility was in accordance with the ISO 6876-2001 speciflcation. For the evaluation of pH and calcium ion release, polyethylene tubes were filled with the materials and immersed in flasks with 10 ml of deionized water. After 24 h, 7, 14, 21, 28, and 45 days pH was measured. In 45 days, the calcium released was evaluated with an atomic absorption spectrophotometer. Results: The addition of iodoform increased setting time in comparison with pure sealer (P < 0.05). As for flow, solubility, and calcium release, the mixtures presented results similar to pure sealer (p > 0.05). In the 24 h period, the mixture with 1.1 g and 0.55 g of iodoform showed lower pH than pure sealer and than sealer added with 0.275 g of iodoform (P < 0.05). Conclusions: The iodoform added to Sealer 26 interferes with its setting time and solubility properties. Further studies are needed to address the clinical signiflcance of this interference.

Effects of calcium hydroxide addition on the physical and chemical properties of a calcium silicate-based sealer

Recently, various calcium silicate-based sealers have been introduced for use in root canal filling. The MTA Fillapex is one of these sealers, but some of its physicochemical properties are not in accordance with the ISO requirements. Objective: The aim of this study was to evaluate the flowability, pH level and calcium release of pure MTA Fillapex (MTAF) or containing 5% (MTAF5) or 10% (MTAF10) calcium hydroxide (CH), in weight, in comparison with AH Plus sealer. Material and Methods: The flowability test was performed according to the ISO 6876: 2001 requirements. For the pH level and calcium ion release analyses, the sealers were placed individually (n=10) in plastic tubes and immersed in deionized water. After 24 hours, 7 and 14 days, the water in which each specimen had been immersed was evaluated to determine the pH level changes and calcium released. Flowability, pH level and calcium release data were analyzed statistically by the ANOVA test (alpha=5%). Results: In relation to flowability: MTAF>AH Plus>MTAF5>MTAF10. In relation to the pH level, for 24 h: MTAF5=MTAF10=MTAF>AH Plus; for 7 and 14 days: MTAF5=MTAF10>MTAF>AH Plus. For the calcium release, for all periods: MTAF>MTAF5=MTAF10>AH Plus. Conclusions: The addition of 5% CH to the MTA Fillapex (in weight) is an alternative to reduce the high flowability presented by the sealer, without interfering in its alkalization potential.

Cellular and Molecular Tissue Response to Triple Antibiotic Intracanal Dressing

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Confinement effects and why carbon nanotube bundles can work as gas sensors

Carbon nanotubes have been at the forefront of nanotechnology, leading not only to a better understanding of the basic properties of charge transport in one dimensional materials, but also to the perspective of a variety of possible applications, including highly sensitive sensors. Practical issues, however, have led to the use of bundles of nanotubes in devices, instead of isolated single nanotubes. From a theoretical perspective, the understanding of charge transport in such bundles, and how it is affected by the adsorption of molecules, has been very limited, one of the reasons being the sheer size of the calculations. A frequent option has been the extrapolation of knowledge gained from single tubes to the properties of bundles. In the present work we show that such procedure is not correct, and that there are qualitative differences in the effects caused by molecules on the charge transport in bundles versus isolated nanotubes. Using a combination of density functional theory and recursive Green's function techniques we show that the adsorption of molecules randomly distributed onto the walls of carbon nanotube bundles leads to changes in the charge density and consequently to significant alterations in the conductance even in pristine tubes. We show that this effect is driven by confinement which is not present in isolated nanotubes. Furthermore, a low concentration of dopants randomly adsorbed along a two-hundred nm long bundle drives a change in the transport regime; from ballistic to diffusive, which can account for the high sensitivity to different molecules.

Utilização de lodo de esgoto na produção de mudas de aroeira-pimenteira

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ocorrência da infecção por Cryptosporidium spp. em cabritos (Capra hircus)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Resposta tecidual induzida por Biodentine™e MTA Branco em subcutâneo de ratos

Pós-graduação em Odontologia - FOAR

Avaliação do desempenho de um reator anaeróbio compartimentado no tratamento de esgoto doméstico

Pós-graduação em Engenharia Civil - FEIS

Avaliação experimental de eficiência térmica de um recuperador de calor e caldeira em um sistema de cogeração

Pós-graduação em Engenharia Mecânica - FEB