Caracterização físico-mecânica de painéis aglomerados de Eucalyptus grandis com adição de resíduos industriais madeireiros

Pós-graduação em Ciência Florestal - FCA

Análise e extração de características de imagens termográficas utilizando componentes principais

Pós-graduação em Engenharia Mecânica - FEIS

Divergências entre histórico da consulta e diagnóstico médico de agressões físicas registradas nos prontuários de uma unidade de urgência e emergência

There can be several indicators of violence in society. However, in no other health unit such violence acquires visibility as in emergency. This study aimed to examine whether there is divergence between the history of medical consultation and diagnosis of physical aggressions in the emergency unit. A cross-sectional study was conducted in an emergency unit in the city of Araçatuba, state of São Paulo, Brazil, based on medical records, considering data on patients, lesions, history, diagnosis and treatment. Out of 133,537 visits, only 153 were recorded as physical aggressions, and 161 informed violence in the history of the consultation; 59.6% were male, 60.6% were between 20 and 44 years old. Excoriations, pain and injury predominated. There were no associations between state violence in the diagnosis and the characteristics of patients and visits (schedule, routing, gender, age). The conclusion is that in most cases violence reported in the history of the consultation was not mentioned in the diagnosis of injuries. The characteristics of care and patients were not related to the fact that professionals diagnosed the case as violence.

Caracterização física de painéis aglomerados de Eucalyptus grandis com adição de resíduos industriais madeireiros

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Considerações sobre a presença e características do tema água nas Propostas Curriculares para o ensino de Química/2009, do Estado de São Paulo

This study sought to raise the water issue is addressed in the teaching of chemistry in public schools through the notebooks Curricular Proposal of the State of Sao Paulo. First we tried to do a survey of knowledge related to construction of the concept of historical perspective, the physical and chemical properties, their importance to man and the particulars of the national curriculum for this subject. The methodology used was qualitative, descriptive and documentary. We analyzed the books for the first, second and third marking periods and the three series (the 4th book had not yet been distributed). As expected the first scenario, the proposed curriculum addresses the topic in greater depth in only one of the notebooks of the second year of high school. The approaches are no longer linked to health issues and the environment, cross-cutting issues considered by the NCP and important for students to make associations between the chemical content and their daily lives. We conclude that the contract should be evaluated by teachers and that their use should be involved in drawing up a plan that takes into account the aspects that seem incomplete. We also emphasize that although the proposal is interesting from the standpoint of teaching, teachers need training to its full use in the classroom

Dextrana: revisão sobre uso e possíveis aplicações industriais

O emprego significativo de polímeros na sociedade moderna causou um grande desenvolvimento tecnológico em torno de sua produção a partir do petróleo. Contudo a limitação crescente de disponibilidade e as altas sucessivas do preço do petróleo têm estimulado, cada vez mais, novas pesquisas no desenvolvimento de biopolímeros provenientes de recursos renováveis. O biopolímero dextrana tem origem da conversão do substrato promovida pela enzima dextranasacarase que é secretada por micro-organismos principalmente pertencentes à família Lactobacillaceae. O objetivo desta pesquisa tem por meio do levantamento bibliográfico reunir conteúdos relacionados ao biopolímero dextrana, a enzima dextranasacarase, os micro-organismos produtores e suas aplicações industriais. Devido a algumas características da dextrana (Hidrofobicidade, estabilidade, pureza e habilidade de formar soluções claras e estáveis, entre outras), a mesma apresenta um grande leque de aplicações na indústria farmacêutica, alimentícia, petroquímica e química. As pesquisas que vinculam a dextrana às aplicações industriais estão em plena expansão e sabendo que a produção de dextrana é proveniente de recursos naturais renováveis e de origem microbiana, o momento atual é favorável para um aumento de sua produção, causando a valorização deste biopolímero no mercado nacional e internacional

Estudo das propriedades físicas em materiais vítreos do sistema 50B2O3 - 15CuO - 20Li2O - 15X (X= Na2O, K2O, RbCI e Cs2O)

The increasing demand for devices for solid state applications in many technological areas has resulted in a high demand for new materials. Among these material have the advantage of being manufactured with different chemical compositions, and may have physical properties equal to or higher than the corresponding crystalline material. The aim of this paper was to produce borate glass system 50B2O3 – 15CuO – 20Li2O – 15X (X = Na2O, K2O, RbCl e Cs2O) to analyze the influence of the atomic radius of alkali in the physical properties of this glass system. The glasses were synthesized by the process of melting and molding. The characteristic temperatures were determined by the technique of scanning calorimetry (DSC). The non-crystalline was determined by x-ray diffraction. In order to determine the molar volume a density measurement by using the Archimedes method was used. The structural characterization was carried out using the technique of infrared spectroscopy

Características de atributos do solo em ambientes da região Sul do estado do Amazonas

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Porta-enxertos na produção e nas características físico-químicas da uva e do vinho de diferentes cultivares em Jundiaí, SP

Pós-graduação em Agronomia (Horticultura) - FCA

Impacto da doença de Parkinson sobre as características cinéticas e cinemáticas da tarefa de levantar e andar, em caidores e não caidores

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Variação sazonal das variáveis físicas e químicas em riachos de duas bacias da região centro-sul do estado do Paraná, sul do Brasil

The present study was developed in two streams from the two different drainage basins located in the mid-southern region of Paraná state. In each stream were evaluated some physical and chemical parameters in open (without streamside vegetation) and shaded (with streamside vegetation) segments. Monthly samplings were carried out from January to December 2007. The following limnological parameters were measured: water temperature, specific conductance, oxygen saturation, pH, turbidity and current velocity. In the same stream were not observed differences among segments from the drainage basins, and nominal values and seasonal pattern have been very similar between open and shaded ambient. A Principal Component Analysis (PCA) showed small divergence between streams and segments, with separation of groups with base sampling dates. The results suggest that the region is homogeneous according to physical and chemical water conditions, therefore, stronger influenced for time factor, and diverging seasonal periods associated a climatic region condition.

Desenvolvimento de filmes biodegradáveis à base de zeína, caracterização das propriedades funcionais e estruturais e avaliação do uso como cobertura na conservação das características físico-químicas do queijo Minas padrão

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo das propriedades físicas de sistemas ferroelétricos com estruturas tipo Aurivillius

Pós-graduação em Ciência dos Materiais - FEIS

Características agronômicas e demanda energética de cultivares de soja sob efeito dos sistemas de preparo do solo

The aim of this study was to evaluate the influence of preparation: intermediate grade, minimum tillage and no-till on the agronomic characteristics and energy demand of transgenic soybean cultivars and non-GMO soybeans. Soil preparation aims at improving physical, chemical and biological conditions, aiming at good emergence and plant development. The different types of tillage may interfere with the agronomic characteristics and productivity of plants, and in energy use which can cause variation in production costs. Genetically modified plants can be one of the alternatives for reduction of production costs in crops by reducing pesticide applications, enabling higher productivity with less environmental impact. The test was conducted in 2010/2011 at the agricultural Experimental Farm Lageado, belonging to the Faculty of Agronomic Sciences – UNESP, located in the city of Botucatu, SP in an area using no-till systems for the past 12 years. The experiment was carried out in a 3 x 2 factorial, randomized treatments were comprised of three soil preparation systems, minimum cultivation, intermediate grade preparation and no-till, with two cultivars of soybeans: MGBR-46 Conquest (conventional), Valuable RR (Transgenic). The data obtained was submitted to variance analysis using Tukey test at a 5% probability. With the results analyzed it might be observed that there was no significant difference between treatments, in the variables, the percentage of soil cover, final soybean plant population, grain yield and plant height. The results obtained show that the no-till system resulted in higher productivity than conventional tillage and minimum cultivation. The higher specific energy use per area was observed in minimum cultivation with a chisel plough, when compared to the preparation across the grid. The greatest fuel consumption was to treat minimum cultivation with chisel plough. The highest values were found in the skating system of minimum cultivation, being greater in conventional tillage system. It is more satisfactory for the producer to sow transgenic soy using a no-till system, because productivity retrieved from that system compensates for fuel expenditure.

Diagnose foliar da cultura da soja em função da aplicação superficial de lodos de esgoto e resíduos industriais sob diferentes doses em sistema plantio direto

The application of industrial and municipal waste in the soil may be recommended by your corrective and fertilizer value, giving the great potential for agricultural reuse, improves physical, chemical and biological soil properties and helps to reduce the consumption of fertilizers and correctives, without contamination by heavy metals. This study aimed to evaluate the absorption of nutrients and potentially toxic elements, and their effect on the development of soybean (Glycine max (L.) Merrill) grown under No-Tillage system (NT). The work was developed in the field, at the Experimental Farm Lageado - FCA / UNESP, Botucatu (SP) in an Oxisol under tropical climate of altitude. The experimental design was randomized blocks, factorial 4x4+1, with four replications. The treatments consisted of four residues: two sewage sludge, one centrifuged and treated with quicklime (LC) and a biodigester (LB) and two industrial wastes: steel slag (E) and lime mud (Lcal) , applied in dosages of 0, 2, 4 and 8 Mg ha-1. The surface application of LC, LB, Lcal and E residues in soil under NT favored the development of soybean, with no heavy metal contamination, given the current legislation.