319 resultados para Capacidade de inovação


Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study aims to develop innovative proposals for production agriculture management and plans to build a participatory model, through the digital inclusion of members of the family farm gathered in a cooperative venture seeking to establish new environmental management efficiency for household production. The first part of the hypothesis assumes that a major obstacle to the insertion of small family farms into the markets is skilled labor, human capital. A training model has been developed for traceability and tracking activities on family farms, based on the atemoya culture. The second hypothesis predicts that it is possible to create a model that is scientifically supported by widely accepted rules derived from GlobalGAP standard certification, a global benchmark for good agricultural practices. Using these rules the model seeks to achieve the traceability of agricultural products and operations from the preservation of identity information within the production chain. The results obtained by the computerized system confirmed the presented hypotheses by demonstrating that technological innovation through intensive communication and information technologies education as well as other associated forms are important drivers of regional development, especially if implemented through a digital inclusion project using the state program Infocentros Access São Paulo.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The main objective of this paper was to verify the influence of the organization and management in social responsibility the decision of adoption, choice, justification and implementation of innovation in elaborates of sugar, ethanol and energy companies of the midwestern state of São Paulo. Using multivariable analysis of principal components and clusters, the variables were analyzed and companies classified. Adapted to contemporary situations, the Freeman (1975) model of taxonomies was the parameter with research information in personal interviews by semi-structured questionnaires. The activities investigated were the existence of programs and organization to improve the welfare and quality of life to employees and family (leisure, culture, health, self-knowledge, values, beliefs etc.), program and social volunteering organization for the community, programs and organization to encourage the training of educators and extension education and incentive programs and organization to research and scientific production. It was concluded that the best companies which included, in their organization structures, management practices embodied in social responsibility.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The primary objective of this study was to verify the existence of internal organization and processes influencing the decisions on adoption, choice, justification and implementation of innovative practices of scientific and technical activities undertaken in the elaborates of sugar, ethanol and energy companies of the midwest of the state of Sao Paulo. Using multivariate analysis of principal components and clusters, the variables were analyzed and the companies, classified. The taxonomy model adapted to contemporary situations described by Freeman (1975), was the 'parameter used with research information in personal interviews by semi-structured questionnaires. The investigated activities constituted of: basic research; applied research; experimental development; scientific and technical information; long-term planning. The variables analyzed were: production processes, operating systems, development of new products, projects and implementation of pilot plant for new products, development, knowledge, studies of other business segments, number of innovations, and the number of existing employees in the organizational structure for these purposes. It was concluded that the best companies with innovative attitudes are those that have incorporated into their organizational the structures, practices and techniques of scientific activities.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

No-till has been used in many different regions of Brazil. However, depending on the location and intensity of machinery traffic, this has caused the problem of soil compaction and many producers are scarification the land as a solution to break through the layer that is restricting plant growth. The objective of this study was to evaluate the influence of scarification (0.30 m) in the physical properties of a dystrophic Alfisol comparing the results with a non-scarified contiguous area; both were previously conducted using no-till. The density and pressure of pre-consolidation were sampled in two areas of non-tillage, one with chiseling (PDCE) and one without (PDSE) by using the UMAS -Mobile Soil Sampling Unit built by NEMPA – Agroforestry Machinery and Tire Testing Center/FCA / UNESP, Botucatu ,SP. The UMAS is equipped with GPS which allows the samples to be georeferenced. The samples were evaluated in the laboratory through the collection of standardized rings. Sampling was performed at a dimension of 15 x 50 m, with 160 rings being collected. The samples containing rings which were used in determining the density and also for testing the consolidometer, were collected from the layers of 0 to 0.10 m, 0.10 to 0.20 m, 0.20 to 0.30 0.30 to I 0.40 m. For the odometer test the undisturbed sample rings were used in obtaining the load bearing capacity of the soil. The soil management adopted provided a decrease in soil density using no-tillage with scarification depths from 0.0 to 0.10 0.10 to 0.20 m while the other depths did not show any decrease. The pre-consolidation pressure in combination with soil aggregate resistance identified that the management process PDCE within all layers was subjected to water content reliability regarding a greater load bearing capacity of the soil. For the PDSE that only was possible in the 0 to 0.10 m, showing greater consolidation of this layer.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The study aimed mapping of the land use capacity classes for the Rio das Pedras watershed, Itatinga-SP in order to provide another mechanism of environmental planning for the studied area. It was used 1:10,000 topographic letters for the slope map generation which was overlaid with the studied area soil map. It was applied the judgment table criteria method, for generation of land use capacity map of the studied area. It were identified the following results: First, class III with constraints in relation of low fertility and restrictions about erosion risks on high slope areas. Second, class VI with the same characteristics of class III however with the presence of an aggravating factor of sand texture in all horizons, resulting in high risks of erosion events, especially in high slopes areas, and contamination by pollutants due the high soil permeability. Conclusions: It was verified that the more critical regions for land use capacity classes were VIs and mainly VIes class. The last one has more high relief areas and the presence of Neossolo Quartzarenico soil, with a big erosion propensity. The land use capacity map allow making different decisions for each region of the watershed respecting their individual characteristics.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Física - IFT

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O câncer tem sido, há muitos anos, a principal causa de morbidade e mortalidade no mundo, alcançando a casa de milhões de mortes todo ano. Dentre os tipos de câncer, os que mais matam são: pulmão, fígado, estômago, colorretal, mama e esofaringeal. Todos os fatores externos aos quais estamos expostos e até mesmo o nosso metabolismo normal, contribuem para a geração de espécies reativas de oxigênio que podem causar danos à macromoléculas, lipídios e proteínas, sendo, hoje, entendido como o responsável pelo desenvolvimento de diversos processos patológicos no ser humano, dentre eles, o câncer. Pode-se prevenir o desenvolvimento de tumores através da diminuição da exposição aos fatores de risco, como tabagismo, obesidade e sobrepeso, hábitos alimentares não saudáveis e sedentarismo, exposição a radiações e poluição do ar. O sucesso no tratamento e até mesmo a cura de determinado câncer é possível através da detecção precoce, possível através de exames de rotina. Sabe-se também que substâncias antioxidantes, presentes em muitos alimentos, atuam de forma a neutralizar o efeito danoso de radicais livres, evitando dessa forma, o estresse oxidativo. Por isso, o papel dessas substâncias tem sido alvo de muitos estudos, principalmente no que diz respeito à prevenção do câncer.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Despite the growing concern in seeking more sustainable energy sources, oil demand is likely to grow in coming years. To keep up with this growth, the oil industry has increasingly invested in innovation and efficiency. Knowing that, new technologies have been developed to explore deeper waters, without giving up the best practices in worldwide operational safety. The use of rigid pipelines in deepwater offshore facilities is increasing quickly and because of this, the ways of storing and launching pipe have been studied and perfected. In this paper the Bauschinger effect on API 5L X70 steel was analyzed proving that there was a reduction in yield strength when an effort was applied in a previous direction, then an effort was then applied in the opposite direction. To observe this phenomenon, the tensile test was conducted to determine the mechanical properties of the base metal, such as yield stress, tensile strength, elasticity and maximum tensile, so then compare it with the results obtained in the Bauschinger Effect Test. The analysis results showed that the steel had high resistance, with good plastic deformation capacity without failing, well-defined yield point, showing itself appropriate for the operation of oil and gas pipes