Phytotoxicity of Solanum aculeatissimum Jacq: leaves extract

The objective of this study was to evaluate the phytotoxicity of Solanum aculeatissimum Jacq. leaves ethanolic extract in seeds germination, development and fixation of Lactuca sativa seedlings. The same study also aimed to assess the mitotic index of lettuce roots meristematic cells, quantification of phenols and total flavonoids and triage by mean of phytochemical testing of the main secondary metabolites classes. Bioassays of germination, development of root and hypocotyl were carried out in Petri dishes using achenes of Lactuca sativa L. cv. 'Grand Rapids' (lettuce). Concomitantly, were evaluated the physico-chemical characteristics (pH, osmotic potential and electrical conductivity), mitotic index, quantification of total phenols and flavonoids and determination of phytochemical profile of the treatments extract. The results obtained in the bioassays demonstrate that the ethanol extract of S. aculeatissimuma presents phytotoxic potential in the development of lettuce seedlings, given that the concentration of 20 mg/ml showed greater inhibition (41% of germination). The extract contains significant amounts of antioxidants, total flavonoid and phenols, where the concentration 1000µg/mL showed higher values (86.50%). Furthermore, it was possible to observe the presence of compounds with allelopathic activity in the phytochemical screening test as coumarins, tannins, terpenes, flavonoids and alkaloids. Given the above it is clear that the ethanolic extract of S. aculeatissimum presents allelopathic substances with phytotoxic activity that can affect the germination and development of other plant species in their natural environment.

Improvement of the physical performance is associated with activation of NO/PGC-l alpha/mtTFA signaling pathway and increased protein expressions of electron transport chain in gastrocnemius muscle from rats supplemented with L-arginine

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Erosion rates and landscape evolution of the lowlands of the Upper Paraguay river basin (Brazil) from cosmogenic Be-10

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Application of Micro-Raman Spectroscopy to the Study of Yttria-Stabilized Tetragonal Zirconia Polycrystal (Y-TZP) Phase Transformation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Strategies for single nucleotide polymorphism (SNP) genotyping to enhance genotype imputation in Gyr (Bos indicus) dairy cattle: Comparison of commercially available SNP chips

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influence of storage times on bond strength of resin cements to root canal

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Distribution and systematics of the freshwater genus Sirodotia (Batrachospermales, Rhodophyta) in North America

Multivariate morphometrics and image analysis were used to determine the number of well-delineated infrageneric taxa of Sirodotia in North America. Three groupings were distinguished from 25 populations examined from Newfoundland and Quebec in the north to central Mexico in the south. These groupings were statistically related to 10 type specimens, and the following species were recognized: Sirodotia huillensis (Welwitsch ex W. et G. S. West) Skuja (syn. S. ateleia Skuja), S. suecica Kylin (syn. S. acuminata Skuja ex Flint and S. fennica Skuja), and S. tenuissima (Collins) Skuja ex Flint. These species are differentiated on the basis of whorl shape and degree of separation at maturity (S. suecica, rounded and appressed; S. huillensis and S. tenuissima, truncated apex and separated), the density of spermatangia (S. huillensis, dense clusters, S. suecica and S. tenuissima, sparsely aggregated), and the mode of germination of the gonimoblast initial (S. suecica and S. tenuissima,from the nonprotuberant side of the fertilized carpogonium; S. huillensis from the protuberant side). Sirodotia huillensis was found only in the desert-chaparral, whereas S. suecica and S. tenuissima occurred from south-temperate to boreal regions in cool (temperature 8-18-degrees-C), low ion (specific conductance 10-99 muS.cm-1), and mildly acidic to neutral (pH 5.7-7.3) waters.

Evaluation of the shear bond strength of the union between two CoCr-alloys and a dental ceramic

Introduction: Based on the importance of the integrity of the metal/ceramic interface, the purpose of this work was to evaluate the shear bond strength of the metal-ceramic union of two Co-Cr alloys (Wirobond C, Bego; Remanium 2000, Dentaurum) combined with Omega 900 ceramic (Vita Zahnfabrik). Material and Method: Eleven cylindrical matrixes were made for each alloy, and the metallic portion was obtained with the lost wax casting technique with standardized waxing of 4mm of height and of 4mm of diameter. The ceramic was applied according to the manufacturer's recommendations with the aid of a teflon matrix that allowed its dimension to be standardized in the same size as the metallic portion. The specimens were submitted to the shear bond test in an universal testing machine (EMIC), with the aid of a device developed for such intention, and constant speed of 0.5mm/min. Results and Conclusions: The mean resistance was 48.387MPa for Wirobond C alloy, with standard deviation of 17.718, and 55.956MPa for Remanium 2000, with standard deviation of 17.198. No statistically significant difference was observed between the shear strength of the two metal-ceramic alloys.

Study of thermocycling effect on the bond strength between an aluminous ceramic and a resin cement

This study evaluated the effect of thermocycling on the bond strength between Procera AllCeram (Nobel-Biocare) and a resin cement (Panavia F, Kuraray CO). Nine ceramic blocks with dimensions of 5x6x6mm were conditioned at one face with Rocatec System (Espe). After, they were luted with Panavia F to composite resin blocks (Clearfil AP-X, Kuraray CO). The nine groups formed by ceramic, cement and composite resin were split up obtaining 75 samples with dimensions of 12x1x1mm and adhesive surface presenting 1mm2±0.1mm2 of area. The samples were divided into 3 groups (n=25): G1 - 14 days in distilled water at 37ºC; G2 – 6,000 cycles in water (5ºC - 55ºC – 30s); G3 – 12,000 cycles in water (5ºC - 55ºC – 30s). The samples were tested in a universal testing machine (EMIC) at a crosshead speed of 1mm/min. Data were analyzed by ANOVA and Tukey tests. The results indicated that mean values of rupture tension (MPa) of G1 (10.71 ± 3.54) did not differ statistically (p <5%) from G2 (9.01 ± 3.90), however there was statistical difference between G1 and G3 (7.28 ± 3.00). It was concluded that thermocycling significantly reduced the bond strength values when samples were submitted to 12,000 cycles.

The effect of self-adhesive and self-etching resin cements on the bond strength of nonmetallic posts in different root thirds

The purpose of this study was to evaluate the effect of self-adhesive and self-etching resin cements on the bond strength of nonmetallic posts in different root regions. Sixty single-rooted human teeth were decoronated, endodontically treated, post-space prepared, and divided into six groups. Glass-fiber (GF) posts (Exacto, Angelus) and fiber-reinforced composite (FRC) posts (EverStick, StickTeck) were cemented with self-adhesive resin cement (Breeze) (SA) (Pentral Clinical) and self-etching resin cement (Panavia-F) (SE) (Kuraray). Six 1-mm-thick rods were obtained from the cervical (C), middle (M), and apical (A) regions of the roots. The specimens were then subjected to microtensile testing in a special machine (BISCO; Schaumburg, IL, USA) at a crosshead speed of 0.5 mm/min. Microtensile bond strength data were analyzed with two-way ANOVA and Tukey's tests. Means (and SD) of the MPa were: GF/SA/C: 14.32 (2.84), GF/SA/M: 10.69 (2.72), GF/SA/A: 6.77 (2.17), GF/SE/C: 11.56 (4.13), GF/SE/M: 6.49 (2.54), GF/SE/A: 3.60 (1.29), FRC/SA/C: 16.89 (2.66), FRC/SA/M: 13.18 (2.19), FRC/SA/A: 8.45 (1.77), FRC/SE/C: 13.69 (3.26), FRC/SE/M: 9.58 (2.23), FRC/SE/A: 5.62 (2.12). The difference among the regions was statistically significant for all groups (p < 0.05). The self-adhesive resin cement showed better results than the self-etching resin cement when compared to each post (p < 0.05). No statistically significant differences in bond strengths of the resin cements when comparable to each post (p > 0.05). The bond strength values were significantly affected by the resin cement and the highest values were found for self-adhesive resin cement.

Dynamics of foraging trails in the Neotropical termite Velocitermes heteropterus (Isoptera: Termitidae)

Foraging behavior in termites varies with the feeding habits of each species but often occurs through the formation of well-defined trails that connect the nest to food sources in species that build structured nests. We studied the formation of foraging trails and the change in caste ratio during foraging in the termite Velocitermes heteropterus. This species is widespread in Cerrado vegetation where it builds epigeal nests and forages in open-air at night. Our aim was to understand the processes involved in the formation of foraging trails, from the exploration of new unmarked areas to the recruitment of individuals to food and the stabilization of traffic on the trails, as well as the participation of the different castes during these processes. Foraging trails were videotaped in the laboratory and the videos were then analyzed both manually and automatically to assess the flow of individuals and the caste ratio on the trails as well as to examine the spatial organization of traffic over time. Foraging trails were composed of minor workers, major workers, and soldiers. The flow of individuals on the trails gradually increased from the beginning of the exploration of new areas up to the discovery of the food. The caste ratio remained constant throughout the foraging excursion: major workers, minor workers and soldiers forage in a ratio of 8:1:1, respectively. The speed of individuals was significantly different among castes, with major workers and soldiers being significantly faster than minor workers. Overall, our results show that foraging excursions in V. heteropterus may be divided in three different phases, characterized by individual speeds, differential flows and lane segregation.

Temperatura, luz e tolerância à dessecção na germinação de sementes de açaí-do-Amazonas

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Effects in mechanical properties and structure of the soil tillage with rotary paraplow

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito imediato do método de secagem na qualidade de sementes de crambe

Crambe (Crambe abyssinica Hochst) seeds have high oil contents and its growth in Brazil aims to produce bio diesel. The crambe seeds production and commercialization began a few years ago. Research in technology production is essential and it is also important to use high quality seeds regardless of the technological level employed in the crop production. One of the factors that affect seed quality there is the drying process. Seed drying performed properly can reduce seed moisture content for storage without decrease in its qualitative characteristics. The aim of this study was to evaluate the immediate effect of natural and artificial drying methods (using heated and unheated air) on crambe seeds quality. The seeds were produced at Fazenda Lageado, Faculdade de Ciências Agronômicas, UNESP, Botucatu/SP, on April 2009. Seeds were submitted to the following drying methods: a) seed drying in the shade with natural ventilation; b) artificial drying method using heated air; c) artificial drying method using unheated air; d) drying on ceramic patio; e) drying on the mother plant. The seeds were evaluated immediately after drying. The following tests were performed: seed moisture content; standard germination; first count of germination; seedling emergence; emergence speed index and electrical conductivity. The experimental design was randomized blocks and the data obtained was subjected to analysis of variance, worth means being compared by Tukey test at 5% probability. There was no significant difference among drying treatments in relation to: germination rate, first count of germination, electrical conductivity, seedling emergence and emergence speed index. The highest percentage of abnormal seedlings was obtained on treatment with heated air drying. The drying on the mother plant method showed the lower percentage of dead seeds. The drying methods studied did not cause an immediate effect on crambe seeds quality, which showed high percentage of dormant seeds post-harvest.

Vibração de plantas de pimenta Malagueta para produção de frutos e sementes em ambiente protegido

This study aimed to verify the effect of vibration of plants in the production of fruits and seeds and in the physiological quality of the seeds of the “Malagueta” pepper in a protected cultivated area with open and closed sides. The experiment was conducted at the Experimental Farm of the School of Agronomic Sciences of Universidade Estadual Paulista (FCA/UNESP), located in the city of São Manuel (SP). Two treatments were carried out, which consisted of plants that did and did not undergo vibration. Plants were vibrated manually by swinging the wire attached to the supporting bamboo for about 5 seconds, twice a day for 11 weeks. The design was a randomized block with six repetitions. The same experiment was conducted in two protected environments, with and without anti-aphids screens on the sides, cultivated in the same season. For the comparison of environments, a combined analysis was performed considering each environment as a separate experiment. The characteristics evaluated were: weight and number of fruits per plant; weight, diameter and length of fruit; weight and amount of seeds per fruit; and plant height. For the analysis of seed quality, the characteristics evaluated were: germination percentage; first count of germination; dry matter of seedlings; seedling emergence in substrate; and seedling emergence speed index. Regardless of the environment, vibration affects the physiological quality of seeds. The presence of pollinator insects benefited the production and quality of “Malagueta” pepper seeds and increases the fruit weight.