Estudo teórico das propriedades estruturais e eletrônicas do GaN e do semicondutor magnético Ga1-xMnxN no bulk e na superfície

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Processamento e caracterização de compósitos de resina fenólica com nanotubos de carbono com aplicações aeroespaciais

Este trabalho de pesquisa consistiu na obtenção de compósitos nanoestruturados utilizando matrizes poliméricas termorrígidas e nanotubos de carbono (CNT) e posterior caracterização de suas propriedades mecânicas, térmicas, elétricas, reológicas e demais características físico-químicas para aplicações aeroespaciais. As atividades experimentais para a realização deste trabalho foram, em sua maioria, conduzidas na Alemanha. Durante o desenvolvimento deste trabalho de pesquisa, foi possível entender melhor como deve ser realizada a purificação, funcionalização e dispersão de CNT em compósitos poliméricos. Desta forma, CNT foram caracterizados e utilizados como reforços para a obtenção de compósitos nanoestruturados em matrizes termorrígidas (resina fenólica). Estes compósitos foram processados, por meio de cura em autoclave e avaliados com relação aos seus desempenhos mecânicos, físico-químicos e morfológicos. Duas metodologias foram utilizadas para permitir a dispersão dos CNT: dispersão em solução aquosa e por calandragem (TRC). Os resultados obtidos mostram que a metodologia mais adequada para dispersar os CNT em resina fenólica é a partir do processo por calandragem e que teores superiores a 0,5% em massa de CNT não resultam em melhorias significativas quanto aos desempenhos viscoelástico, térmico, elétrico e mecânico destes compósitos. Ainda, a partir dos ensaios reológicos e elétricos, foi observado que teores abaixo de 0,2% em massa de CNT já são suficientes para promover a percolação dos CNT na resina fenólica, gerando mudanças significativas no comportamento físico-químico do compósito nanoestruturado. A partir deste trabalho de pesquisa...

Desenvolvimento de metodologia qualitativa para identificação de ceftazidima

A partir deste estudo, métodos para análise qualitativa foram desenvolvidos a fim de identificar ceftazidima em matéria-prima e em formulações farmacêuticas. Esses métodos incluíram testes físico-químicos baseados em propriedades químicas por reações clássicas de coloração e testes instrumentais, tais como cromatografia em camada delgada, calorimetria e espectroscopia no ultravioleta. Os resultados foram obtidos diretamente através de identificação visual pela coloração desenvolvida e pela análise dos espectros obtidos nos testes instrumentais. Esses métodos mostraram-se reprodutíveis e rápidos para identificar ceftazidima na presença de outros antibióticos -lactâmicos, podendo ser usados rotineiramente em análises de controle de qualidade. Palavras-chave: Análise qualitativa. Controle de qualidade. Ceftazidima. ABSTRACT Qualitative methods for the identification of ceftazidime In this study, qualitative analytical methods were developed for the identification of ceftazidime in raw material and in pharmaceutical formulations. These methods included physicochemical tests based on chemical properties, performed by classical colorimetric reactions, and instrumental tests, such as thin-layer chromatography, calorimetry and ultraviolet spectroscopy. Results were obtained directly, through the visual identification of the drug by the color developed, and by analyzing the spectra obtained. These methods proved to be reproducible and fast means of identifying ceftazidime in the presence of other beta-lactam antibiotics and may be used for routine quality control tests. Keywords: Qualitative analysis. Quality control. Ceftazidime.

Análise estrutural das proteínas da seda da teia da aranha Nephila clavipes por uma abordagem proteômica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Absorção de nutrientes e alterações químicas em Latossolos cultivados com plantas de cobertura em rotação com soja e milho

The effects on soil chemical properties brought about by cover crops vary considerably. This study was conducted to evaluate nutrient uptake by five cover crops used for grain, seed and forage production at different seed densities per hectare, as well as uptake by spontaneous vegetation, and their effect on the chemical properties of two Oxisols when grown in rotation with soybean and corn. The experiments were set up in Votuporanga, SP, Brazil and Selvíria, MS, Brazil in March 2008 after conventional soil tillage. A randomized complete block experimental design was used with four replications with the following cover crops at different seed densities: Sorghum bicolor at 6, 7 and 8 kg ha-1; Pennisetum americanum at 10, 15 and 20 kg ha-1; Sorghum sudanense at 12, 15 and 18 kg ha-1; hybrid of Sorghum bicolor with Sorghum sudanense at 8, 9 and 10 kg ha-1; and Urochloa ruziziensis at 8, 12 and 16 kg ha-1. We also used a spontaneous vegetation control. After management of the cover crops, in the first year of study, soybean was sown in no-tillage system and, in the second year, corn was sown, also in a no-tillage system. We evaluated the dry matter yield of different cover crops, nutrient uptake by the cover crops, and the chemical changes in the soil. It was found that in clayey soils with high aluminum content, as in Selvíria, sudan grass at a seed density of 18 kg ha-1, and sorghum at a seed density of 6 kg ha-1, in combination with liming, contributed to reduction of aluminum content and high potential acidity and an increase in base saturation. The different seed densities of each cover crop did not affect the dry matter yield of the cover crop itself, but affected nitrogen uptake of the hybrid Sorghum bicolor with Sorghum sudanense at a seed density of 10 kg ha-1, with lower uptake than at a seed density of 8 kg ha-1. Seed density also affected the organic matter content in the soil with sudan grass, with the seed density of 15 kg ha-1 providing more organic matter content than a seed density of 18 kg ha-1.

Distribuição espacial de atributos químicos do solo em área de pastagem e floresta

The knowledge on spatial distribution of soil properties by means of geostatistics is important as an indicator for a better soil use and management. This study aimed at evaluating the spatial distribution of soil chemical properties, in a forest and pasture area in Manicoré, Amazonas State, Brazil. Grids with 70.00 m x 70.00 m, with regular spacing of 10.00 m x 10.00 m, totaling 64 points, were established, and then soil samples were collected at the depths of 0.0-0.20 m and 0.40-0.60 m and had their chemical properties determined. Data were analyzed by using descriptive statistics and geostatistics, and the sampling density analysis was based on the coefficient of variation and semivariograms range. The mean and median values were adjusted to the closest values, indicating normal distribution, while the spherical, exponential and gaussian models were adjusted to the soil chemical properties. It was concluded that the geostatistics provided adequate information for understanding the spatial distribution. The forest area showed a higher spatial continuity and the pasture area a lower sampling density. The chemical properties showed differences in the spatial variability, while the range represented better the estimates for sampling density and spacing, in the forest and pasture area.

Comportamento dos óxidos de ferro da fração argila e do fósforo adsorvido, em diferentes sistemas de colheita de cana-de-açúcar

In agriculture, the search for higher crop yields based on sustainable soil management has led to a gradual pursuit of knowledge of the variables related to production systems. The identification of the causes of variability of these properties has become a part of strategic planning in the sugar and ethanol industry. This study investigated the spatial variability of iron oxides in the clay fraction and its relationship to soil physical and chemical properties in different sugarcane cultivation systems in the region of Ribeirão Preto, São Paulo State. Two 1-ha plots were outlined in areas with mechanical and manual harvesting systems. Soil samples were taken at 126 points from the 0.00-0.25 m layer in both areas. The mineralogical and chemical data were subjected to geostatistical analyses, to determine the spatial dependence, semivariograms and kriging maps of the properties. To analyze the correlation between the parameters cross-semivariograms were constructed. The spatial variability of chemical properties was greater in areas with mechanical harvesting than burnt harvesting (manual harvesting), whereas the range of the mineralogical properties was largest in the area of green-harvested sugarcane. The properties organic matter, mean crystal diameter goethite had a negatively spatial correlation, while clay was positive correlated with P sorption in the two sugarcane harvest systems.

Cultivation of Agaricus blazei in the environmental protection area of the Baturité region under three types of casing soils

The outdoor cultivation (ditches) of Agaricus blazei was evaluated in the protected natural area (APA) of the mountainous region of Baturité on three types of casing soils (A, B and C). Casing soil A (horizon A) of the local soil was used (Alfisol). Casing B was obtained with a mixture of 30% of eucalyptus charcoal (1-2 cm of length) and 70% of horizon B of the local soil. Casing C was composed of 25% of vermiculite, 25% of coconut fiber and 50% of coarse sand. Temperature, relative humidity and pluviometric rates were monitored. The physical-chemical properties of the three casing soils were analyzed. The effect of the casing soil on the number and weight of the mushrooms, productivity, yield and biological efficiency of A. blazei were evaluated. The yield, productivity, biological efficiency and number of mushrooms were higher when using soil A. The highest productivity for soil A was attributed mainly to the physical characteristics, which were considered more appropriate for the cultivation, in addition to the high pluviometric rates and relative humidity. The productivity with soil A (9.62%) is comparable with the average productivity obtained in Brazil, meaning that the cultivation of A. blazei in this APA may have good perspectives for cultivation.

Adubação fosfatada no crescimento inicial e na nutrição de mudas de pinhão-manso

Physic nut (Jatropha curcas L.) is a perennial oilseed species that has aroused economic interest for biodiesel production. Among other factors, it is essential to determine the nutritional demands of this species to facilitate raising it as a crop. This study aimed to evaluate the early growth and mineral nutrition of physic nut, as well as soil fertility, as affected by phosphorus fertilization. The study was carried out in a plastic greenhouse in a completely randomized block experimental design with four replicates. The plants were grown in plastic pots filled with 50 dm³ of Latossolo Vermelho (Rhodic Hapludox). Application rates of 0, 50, 100, 150 and 200 mg dm-3 of P were tested, plus a control. Evaluations of plant height and root collar diameter were performed monthly. The experiment was ended 150 days after transplant of the seedlings, at which time leaf area, dry weight, leaf contents and total accumulation of macro- (N, P, K, Ca, Mg and S) and micronutrients (B, Cu, Fe, Mn and Zn) were performed, and soil chemical properties were analyzed. We concluded that absence of P fertilization alone is as limiting to early growth of physic nut as simultaneous absence of soil amendment and fertilization. The rate of 57 mg dm-3 of P may be recommended for initial growth of physic nut. The total accumulation of nutrients in physic nut seedlings exhibited the following order: K>N>Mg>Ca>P>S>Fe>Mn>B>Zn>Cu. Phosphorus fertilization resulted in increased soil cation exchange capacity (CEC).

Caracterização de um latossolo em sistemas agroflorestais e mata com o uso de análise estatística multivariada

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Soro ácido de leite associado a doses de nitrogênio em cobertura na cultura do milho

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Secagem de celulases de origem fúngica por spray-drying

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização de poliformos em comprimidos distribuídos pela Secretaria de Saúde de Araraquara por difração de raios X

Pós-graduação em Química - IQ

Plásticos comerciais tratados a plasma para dispositivos ópticos e embalagens alimentícias

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aplicação de corretivos de acidez do solo na implantação do sistema plantio direto

Pós-graduação em Agronomia (Agricultura) - FCA