TinO2n-1 Magneli phases studied using density functional theory

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of nanoparticles on color stability, microhardness, and flexural strength of acrylic resins specific for ocular prosthesis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudos e aplicações da célula fotovoltaica DSC

The solar energy is far the largest source of energy available in earth and has attracted for milleniuns, the attention and interest for a rational use. The solar energy which strikes the Earth in one hour is bigger than the whole consume of energy in Earth in one year. Among the forms of transformation of this clean, renewable energy, the electrical conversion, photovoltaic cells, have the materials based on silicon or germanium semiconductors due to its technology and production processes involved still have a high production cost. An alternative to this solar cell is based on a synthetic dye and a semiconductor nanocrystalline TiO2, titanium dioxide, called DSC (Dye-Sensitized Cells), which have a cost of up to 80% lower than silicon cells

Desenvolvimento e caracterização de formulação cosmética contendo nanopartículas de dióxido de titânio para proteção solar

O protetor solar é um produto extremamente importante para proteger a pele da radiação ultravioleta proveniente do sol e capaz de reduzir a incidência de câncer de pele. Os filtros solares são divididos em orgânicos e inorgânicos e, dentre os inorgânicos, se encontra o TiO2 que atua refletindo, espalhando e absorvendo as radiações UV, além de ser fotoestável e de baixo potencial de irritabilidade dérmica. Neste trabalho foram desenvolvidas formulações cosméticas em forma de gel contendo nanopartículas de dióxido de titânio capazes de agir como fotoprotetores físicos e que mantem a transparência ao serem aplicados sobre uma superfície, como a pele. Foram desenvolvidos xerogéis a base de nanopartículas de TiO2 com tamanho e superfície controlados. A partir dessas nanopartículas foi possível preparar formulações cosméticas contendo nanopartículas redispersas de xerogéis a base de TiO2. Esses sistemas foram avaliados por testes de citotoxicidade e foi obtido um resultado favorável para a continuidade da pesquisa, sugerindo o uso deste material em humanos sem causar danos. Foram feitas as caracterizações físico químicas e estruturais. A análise de FPS indicou amplo espectro da formulação, o potencial zeta mostrou que é possível evitar aglomerações das nanopartículas em pHs utilizados para formulações tópicas, a reologia demonstrou que as formulações apresentam comportamento de recuperação da consistência e organização do material inicial após seu desarranjo durante o cisalhamento. As caracterizações serviram para obter um conhecimento da estrutura química e física das amostras que contém as nanopartículas de dióxido de titânio, para que seja possível fazer uma análise crítica e melhor qualificar o protetor solar desenvolvido.

Obtenção e caracterização de suporte de regeneração óssea de dióxido de titânio

Due to complications caused by metallic implants in the replacement of bone tissue, the biological application of ceramics raised and became a viable alternative. The titania has the ability to promote bone tissue regeneration based on its structure, mechanical and biologically properties compatibility. The present work aims at obtaining and characterization of Titania (TiO2) porous ceramics produced by the polymeric sponge method (replica method). Polyurethane sponge with 10 ppi and 15 ppi (pores per linear inch) were used. The process differentiation is the air blower used to remove excess slurry. The ceramics sponges were dried in an oven, then pre-sintered at 1000 o C and sintered at 1450 o C. The effect of direct sintering at 1450 o C was also assessed. The percentage of solids used to prepare the slurry was 40 to 45% by weight. To increase the surface porosity of the sponge, 20% of starch was added. There was difficulty on controlling the thickness of the slurry layers on the sponge which resulted in the variation of samples mechanical resistance. Despite this, the results obtained are quite promising for the proposed use, indicating that it is possible to obtain titania sponges with an apparent porosity of around 60%, a bulk density ranging from 40 to 47% and a compressive strength resistance – that with better control of layers depositions – can vary from 1 to 4 MPa

Caracterização litogeoquímica dos basaltos do município de Monções -SP

The paper deals with the petrographic and geochemical investigation of basalt flows present in a gravel quarry in the town of Monções in northwestern São Paulo State, members of the Serra Geral Formation of the Paraná Basin. Were collected 11 samples from different horizons within a topographic vertical profile with an average of 18 meters in height. The samples were subjected to macroscopic and microscopic petrographic and chemical major, minor and trace. The results indicated that it is tholeiitic basalts with dense fine grained average. Petrographic analyzes show that basalts studied are basically constituted by plagioclase (between 33 and 49%), labradorite and clinopyroxenes (between 29 and 46%) represented by the subordinate pigeonite and augite, having as accessories opaque (between 3 and 15% ), olivine (<2%), apatite and zircon as dashes. The secondary minerals correspond to cloropheite, chlorite, serpentine, epidote, albite and iron oxides and hydroxy as well as bowlingit of clay, nontronite, and celadonite. The basalts are kind of high-titanium (Hti)> 1.8% TiO2, and apparently belong to the Pitanga magma-type. The geochemical analyzes proved unsatisfactory for the determination of a probable lithogeochemistry differentiation within the vertical stroke for generating multiple data correlation or no immediately discernible trends

Obtenção e caracterização de nanoestruturas puras e dopadas a base de 'TI''O'IND.2' para a aplicação em fotocatálise

Pós-graduação em Química - IQ

Effect of two formulations of 10% sodium ascorbate on fracture resistance of endodontically treated tooth submitted to dental bleaching with hydrogen peroxide associated titanium dioxide nanoparticles

Purpose: This study evaluated the effect of 10% sodium ascorbate (10SA), in gel (10SAg) or aqueous solution (10SAs) formulations, on fracture resistance of endodontically treated tooth submitted to dental bleaching procedures with 15% hydrogen peroxide associated with titanium dioxide (15HP-TiO2) nanoparticles and photoactivated by LED-laser. Material and methods: Forty maxillary premolars were endodontically-treated and embedded in acrylic resin up to the cement-enamel junction. The specimens were divided into four groups (n=10): G1 (negative control): no bleaching, coronal access restored with composite resin; G2 (positive control): three dental bleaching sessions using 15HP-TiO2 and LED-laser photoactivation and restored with composite resin (positive control); G3 (10SAg): similar procedures to G2, but applied 10SA, in gel formulation, for 24 hours before restoration; G4 (10SAs): similar procedures to G3, but applied 10SA, in aqueous solution formulation. The 15HP-TiO2 was applied on buccal and lingual surfaces of the crown tooth and inside the pulp chamber and photoactivated by LED-laser. Between each bleaching session, the teeth were maintained in artificial saliva, at 37oC, for 7 days. In sequence, the teeth were submitted to fracture resistance testing using an eletromechanical machine test. The data was analyzed using Kruskal Wallis test (p = 0.05) Results: There are no differences significant among the groups in relation to fracture resistance of endodontically treated teeth (p>0.05). Conclusions: The use of 10% sodium ascorbate, in gel or aqueous solution formulations, did not interfered on the fracture resistance teeth after dental bleaching using 15HP-TiO2 and LED-laser photoactivation.

Fracture resistance of endodontically-treated teeth submitted to bleaching treatment with hydrogen peroxide and titanium dioxide nanoparticles photoactivated by LED-laser

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Nanotubos óxidos aplicados a resinas compostas fotoativadas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Photocatalytic and photoelectrochemical inactivation of Escherichia coli and Staphylococcus aureus

Water disinfection usually requires expensive chemicals or equipment. Chlorination is a common disinfection method, although it is not able to inactivate all pathogens. High concentrations of residual chlorine also cause an unpleasant taste and smell in drinking water. As an alternative, photocatalysis and photoelectrochemical treatment has a high disinfection potential in drinking water by using solid catalysts, such as titanium dioxide. Highly reactive hydroxyl radical generated during the process serves as the main oxidant, capable of inactivating a wide range of microorganisms. In this study, we proposed a novel comparison between Gram-positive and gram-negative microorganisms. An immobilized TiO2 film promoted higher efficiency in water disinfection processes. The treatment effectively inactivated Escherichia coli and Staphylococcus aureus bacterial microorganisms in a shorter period than other alternative methods.

Electrochemical oxidation of landfill leachate in a flow reactor: optimization using response surface methodology

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Volcanological aspects of the northwest region of Parana continental flood basalts (Brazil)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Electrochemical behavior and corrosion resistance of Ti-15Mo alloy in naturally-aerated solutions, containing chloride and fluoride ions

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Fabrication and structural characterization of bismuth niobate thin films grown by chemical solution deposition

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)