Modelagem em 3D de uma patela humana e análise de esforços utilizando o método dos elementos finitos

Throughout the history of medicine surgeons realized the importance of the patella to the functioning of the knee. The main function of the patella is to increase the mechanical efficiency of the quadriceps tendon and knee extensor mechanism. It was found that 50% to 80% of the fractures without deviation of the patella have the transversal pattern, possibly due to excessive tensile forces applied to the extensor mechanism. The purpose of this study is to analyze the loads to which a patella is submitted during a normal extension movement of knee. This analysis will be done by modeling a 3D patella and subsequent load simulation as, described in medical literature, using the finite element method

Equações de taxa aplicadas na modelagem de dispositivos fotodetectores baseados em poços quânticos

In this work, it is presented a novel method for calculating some intrinsic parameters such as capture mean time, thermic emission mean time, capture probability and noise gain on quantum well infrared photodetectors. Such devices are built by depositing layers of semiconductors of different energy gap, forming quantum wells. The present method uses rate equations to describe the occupation of discrete states of the quantum wells, that together with noise gain equations given in literature, are solved self consistently. The input data of the method is experimental measurement of dark current (current measured with no relevant incident photon) versus applied bias. In order to validate this approach, the values obtained were compared with results from literature

Análise teórica e simulação computacional de um sistema de resfriamento líquido de processadores de computadores pessoais

This paper aims to study the thermal aspects involved in a liquid cooling system for processors, analyzing their competitiveness and efficiency across the fins and fan system usually used by personal computers, because electronic components become more potent and consequently current methods of cooling are becoming ineffective. The liquid cooling system and air cooling system have different heat transfer mechanisms that involve mainly convection and conduction heat transfer modes, and, furthermore, requires an analysis of fluid dynamics, which can evaluate the losses involved in the closed system, consisting in an exchanger heat pipe and water blocks in liquid cooling system or heat sink and turbo-axial fan in the air cooling system

Desenvolvimento de um código computacional para simulação e análise de espectros atômicos

The aim of this work was the development a computer code for simulation and analysis of atomic spectra from databases constructed from the literature. There were created four routines that can be useful for spectroscopic studies in the atomic processes of laser isotope separation. In the first routine, Possible Transitions, the program checks the possible electron transitions from an energy level of the atom present in the database considering the selection rules for an electric dipole transition. The second routine, Locator Transitions, checks the possible electronic transitions within a user-specified spectral region. The routine Spectra Simulator creates simulated spectra using the graphical application gnuplot through lorentzian curve and finally, the routine Electronic Temperature determines the temperature of electronic excitation of the atom, thought the Boltzmann Plot Method. To test the reliability of the program there were obtained experimental emission spectra of a hollow cathode discharge of dysprosium and argon as a buffer gas. The hollow cathode discharge has been subjected to different values of operating currents and pressure of inert gas. The spectra obtained were treated with the assistance of program routines developed (Transition Locator and Spectra Simulator) and temperatures electronic excitation of the atoms of dysprosium in the different discharge conditions were calculated (routine Electronic Temperature). The results showed that the electronic excitation temperature of the neutral dysprosium atoms in the hollow cathode discharge increases with increasing current applied to the cathode and also by increasing the gas pressure buffer. The determination coefficients, R2, obtained by the Electronic Temperature routine using the linear adjust of the Boltzmann Plot Method were greater... (Complete abstract click electronic access below)

Sistema de cálculo computacional da unidade monitora para feixes de elétrons em radioterapia

In radiation theraphy with electron beam, the electrons are produced in linear accelerators, and energy the most used have between 4MeV and 20MeV. Generally, the treatments are done for superficial injuries, because the low penetration of these particles. In this work a system for calculation of monitor units (U.M.) for cases of treatments with electron beam was developed. The Excel program of Microsoft was used and is easily found in the operational system of the personal microcomputers. In the Excel has been inserted the pertinent data of the linear accelerator of Varian, model 2100C, used in the Service of radiation theraphy of the Hospital of the Clinics of the College of Medicine of the UNESP of Botucatu. For some values of the physical parameters, such as: factors field and factors calibration, not supplied in the tests of acceptance of the machine, still proceeded calculations from interpolation and extrapolation. The mathematical formulas for automatic search of these and others factors used in the calculations of the determination of the U.M had been developed in agreement available routines in Excel. For this the functions had been used the function IF (that it imposes search condition) and the PROCH (that looks a value in a column from determined line), beyond the basic functions of addition, multiplication and division. It is intended to optimize the routine of the Services of radiation theraphy that perform through eletrontheraphy procedures, speeding the calculations and minimizing the occurrence of errors and uncertainties deriving of the maken a mistake manipulation of the parameters gotten in tables of data of electron beams

Um Estudo da modelagem matemática na educação matemática e seu potencial para o desenvolvimento do pensamento crítico

The implementation of mathematical modeling curricula represents a great challenge, both for teachers and students, since it escapes the traditional teaching methodology, i.e. when the teacher speaks to his/her students. This work presents, at least, one possible way of implementing mathematical modeling inside the classroom, and how this way encourage critical thinking in students. I see mathematical modeling as an opportunity to minimize student's rejection and increase their interest for mathematics, promoting their competencies to give points of scene in every day situations. The history of mathematics shows that mathematical modeling had developed since almost the beginning of human live, when men needed to solve problems that arose in the course of his life. Mathematics has become more and more abstract, but it is important to recall what was originated it. In this way, it is possible to make this subject matter more meaningful to students. I will make an introduction of mathematical modeling, presenting some important definitions. Based on this framework, I will present a classroom instruction understand on a 7 th grade classroom by myself. With this in instruction I sustain the idea that mathematical modeling has, in fact, a great potential to improve the quality of mathematics teaching. I also sustain that, the development of critical thinking, as a competence, way be achieved with it

Aplicação do algoritmo Rough Sets em um Data Warehouse

This Project aims to develop methods for data classification in a Data Warehouse for decision-making purposes. We also have as another goal the reduction of an attribute set in a Data Warehouse, in which a given reduced set is capable of keeping the same properties of the original one. Once we achieve a reduced set, we have a smaller computational cost of processing, we are able to identify non-relevant attributes to certain kinds of situations, and finally we are also able to recognize patterns in the database that will help us to take decisions. In order to achieve these main objectives, it will be implemented the Rough Sets algorithm. We chose PostgreSQL as our data base management system due to its efficiency, consolidation and finally, it’s an open-source system (free distribution)

Modelagem e simulação do mecanismo biela manivela e análise estrutural de biela automotiva

Nowadays, the automotive industry is working to optimize the design of engines, in order to reduce the fuel consumption with acceptable efficiency ratio. This undergraduate thesis is aimed at perform a kinematic/dynamic analysis of a slider-crank mechanism that is part of a four stroke internal combustion engine, the same engine that was used in the analysis described by Montazersadhd and Fatemi (2007). Two algorithms were developed based on Kane’s method to calculate velocities and accelerations of the mechanism bodies, and provide the acting forces at connecting rod joints. A SimMechanics model was developed to simulate the engine, and monitoring the same parameters that were calculated with the algorithms. The results obtained with both approaches were satisfactory and showed good agreement with the values provided by Montazersadhd and Fatemi (2007). The obtained results showed that the axial component of the rod joint efforts was caused by the pressure exerted on the piston head,whereas the radial component was related with the action of inertia loads. Besides, this thesis presents a connecting rod assembly mesh that is going to be used for static and fatigue finite element analysis in the future

Análise da dinâmica do uso da terra e sua interferência em enchentes na área urbana do município de Americana (SP)

Due to an intense process of population growth and urban density in Americana (SP), mainly due to the development of the local textile industry after 1970, there was, concomitant to the occupation of the margin of rivers and streams, soil sealing that increased the level of superficial runoff, triggering frequent floods. Based on the analysis of these processes we investigate the conditions of one densely urbanized area of the county, the Córrego do Parque, in three time series, 1977, 1996 and 2008. Taking as the starting the characterization and spatial distribution of landscape physiography, we prepared thematic letters and synthetic maps digital scale 1:10,000 from photointerpretation of aeroframes. The thematic maps were produced by scanning with subsequent edition using the software Auto-Cad Map. Checking the data and of geographic coordinates with GPS (Global Positioning System). Regarding land use classes, we used the description of the Soil Conservation Service (1975) which allowed us to get the Curve Number parameter, which will be used in hydrologic modeling for verification of flooding (Tucci, 1989). For the process of hydrologic modeling, we used models based on Methodology Object Oriented Modeling Applied to Water Resource Systems, Viegas Filho (1999), using the computer program called IPHS1, which uses models of the Soil Conservation Service (SCS , 2004), for conversion of rainfall-runoff and the spread of excessive rain. The results indicate that increased waterproofing generated by the change in use and occupation over the past decades promoted the increased surface runoff and drainage system overload, increasing the intensity of floods

Modelagem matemática aplicada a precificação de opções

The mathematical models are critical to determine theoretical prices of options and analyze whether they are overrated or underrated. This information strongly influence in operations carried out by the investor. Therefore, it is necessary that the employee model present high degree of reliability and be consistent with the reality of investment to which it is intended. In this sense, this dissertation aims to apply the steps of mathematical modeling in the Pricing of options for decision making in the investment of a hydroelectric power plant. Was used a Monte Carlo simulation, with the Latin Hypercube Method, to determine the volatility of returns of the project. In order to validate the proposed model, compared to the results found by the Binomial Model, which is one of the models most used in this type of investment. The results reinforce the hypothesis that the mathematical modeling with the Binomial Model is critical to investment decision-making in hydroelectric power

Cálculo estrutural de barreiras: Desenvolvimento de um programa computacional de interface online

This study aimed to develop a computer program which systematizes the structural shielding design calculation in diagnostic radiology facilities. For this purpose methodology of the National Council of Radiation Protection and Measurements (NCRP 147[5]) was used. By comparative statistics studies, it was verified if reference parameters values suggested by the US publication correspond to the average national values. The World Wide Web was chosen because of its characteristics as a powerful mean of communication, especially in terms of the wide variety of useful resources and easy access. To compare the reference values of some parameters proposed by NCRP 147 to Brazilian average, studies about the normalized workload per patient, performance of X-ray tube and primary air kerma, unshielded, at one meter from the focal point of the X-ray tube were made. Through this research, relative differences were found. In workload values this differences reached up to 50% in mammography compared to those presented by the NCRP 147; in X-ray tube performance the percentage differences reached 69% in dental radiology, and air kerma results amounted 31% in fluoroscopy. This demonstrates the importance of validation of international protocols to local realities

Análise da demanda de fertilizantes no Brasil: um estudo econométrico através da modelagem arima

A simulação de tendências futuras no setor de fertilizantes encaminha o produtor rural a prevenir-se de bruscas variações de preços, possibilitando maior poder de concorrência no cenário internacional. Para tanto, propõe-se a utilização da metodologia ARIMA para se estimar a demanda do consumo de fertilizantes no Brasil. Primeiramente revisitando a literatura especializada, obtendo informações históricas relevantes, além de avaliar as vicissitudes do cenário atual. A segunda parte introduz os conceitos da metodologia ARIMA , e encerrando com a apresentação dos dados e análises estatísticas da previsão 2012 à 2016

Modelagem para identificação de indicadores de eficiência energética para edificações e plantas industriais

Pós-graduação em Engenharia Mecânica - FEG

Expressão heteróloga e modelagem de uma enzima lipolítica utilizando a abordagem metagenômica

Pós-graduação em Microbiologia Agropecuária - FCAV

Algumas interseções entre projetos e modelagem no contexto da Educação Matemática

In this article we present a theoretical study on possible intersections between MathematicalModeling and Projects regarding mathematics classes. Thus, we report a brief historical perspectiveon the use of Projects within the educational context. We also present a variety of conceptionsand meanings of the words Projects and Modeling. We found that, regarding the conception ofModeling assumed, there are intersections with the elements that form the idea of Projects. Theliterature then shows that essential aspects for the development of a Project are present when oneworks with Modeling. At this intersection, Modeling Projects can be elaborated.