Projeto de um módulo condicionador de sinais a ser implementado no satélite universitário ITASAT

The Brazilian Environmental Data Collection System (Sistema Brasileiro de Coleta de Dados Ambientais - SBCDA) has been providing reliable information regarding the monitoring of the Brazil environment to INPE (Instituto Nacional de Pesquisas Espaciais) and many Non-governmental organizations (NGO). This system is composed of a large number of Data Collection Plataforms (DCP), in charge of sending local data signals to satellites. Then the satellites automatically redirect each signal to reception centers located at INPE. Nowadays the SBCDA has been operating under the control of three satellites. It is important to mention that two of these satellites have already expired their life span around ten years ago. A strategy to keep the SBCDA operational is to develop a low cost satellite that involves Brazilian Universities and Public Institutions. This graduation work aims to design and simulate a signal conditioning module that enables the collection of a satellite status data, and then sending it to an onboard computer

Obtenção e caracterização de compósitos via RTM com alta fração de fibras de carbono processados à temperatura ambiente

After confirming the high specific mechanical properties of composite materials by scientific studies conducted over the last decades, one of the challenges of this new class of materials is the ability to achieve mass production at a more affordable cost, which has become indispensable. The Resin Transfer Molding (RTM) is an excellent method for manufacturing composite materials. Despite being a process widely used by international companies in the production of high performance structural composites, only a short time the national aviation industry has shown interest in implementing this type of processing to more complex structures and greater structural responsibility. In aeronautical projects, the reproducibility and the relative low cost of this process, several studies have been performed in Brazil for learning and perfecting this technique. This process is suitable for producing polymer components both simple as complex geometry, and allows to achieve consistent thickness, with high quality finish and without limiting range. Polymeric composite components for the high mechanical stress applications such as aircraft structures, satellites, etc., require a strict control of volume fractions of the composite constituents, beyond the knowledge of their mechanical and thermal properties. Therefore, in this experimental work degree study on the mechanical, thermal and of porosity composites processed by RTM processed characterization was performed. This characterization was performed targeting a possible aerospace application of this composite material. For the production of composites, process equipment (RTM RTM injector Radius 2100cc) was used. The processed carbono/epoxy composites were characterized via flexure tests mechanically and thermally analysis via DMA, DSC and TGA. To determine the volume fraction of fibers, the composite samples were analyzed via matrix digestion (ASTM D3171) ... (Complete abstract click electronic access below)

Aplicação de técnicas de geoprocessamento para a avaliação da expansão urbana no municípo de Duque de Caxias (RJ) como subsídio ao monitoramento de dutos: trecho da faixa de dutos Rio de Janeiro - Belo Horizonte

Different forms of human pressure may occur in the pipeline ranges, due to the large extensions and various configurations of land use, which can pass through the pipelines. Due to the dynamics of these pressures, it is necessary to monitor temporal changes of land use and cover the surface. Under this theme, appears as extremely important to use products and techniques of remote sensing, as they allow the identification of objects of the land surface that may compromise the security and monitoring of the pipeline, and allows the extraction of information conditions on land use at different periods of time. Based on the above, this paper aims to examine in a temporal approach, the process of urban expansion in the municipality of Duque de Caxias, located on the outskirts of the metropolitan area of the state of Rio de Janeiro, as well as settlement patterns characteristic of areas that the changes occurred in the period 1987 to 2010. We used the technique of visual analysis to perform the change detection and the technique of image classification, aimed at monitoring human pressure over a stretch of track pipeline Rio de Janeiro - Belo Horizonte, located in the state of Rio de Janeiro. The stages of work involved the characterization of the study area, urban sprawl and the existing settlement patterns, through the analysis of bibliographic data. The processing of Landsat 5 images and the application of the technique of change detection were performed in three scenes for the years 1987, 1998 and 2010, while the classification process was performed on the image RapidEye for the year 2010. Can be noted an increase in urban area of approximately 22.38% and the change of land cover from natural to built. This growth is concentrated outside to the area of direct influence of the duct, occurring in the area of indirect influence of the enterprise. Regarding the settlement patterns of growth areas, it was observed that these are predominantly

Análise da estabilidade do movimento rotacional de satélites artificiais com quatérnions e sob a influência de torques externos

The aim of this work is to analyze the stability of the rotational motion’s artificial satellite using the Routh Hurwitz Algorithm (CRH) and the quaternions to describe the satellite’s attitude. This algorithm allows the investigation of the stability of the motion using the coefficients of the characteristic equation associated with the equation of the rotational motion in the linear form. The equations of the rotational motion are given by the four cinematic equations for the quaternion and the three equations of Euler for the spin velocity’s components. In the Euler equations are included the components of the gravity gradient torque (TGG) and the solar radiation torque (TRS). The TGG is generated by the difference of the Earth gravity force direction and intensity actuating on each satellite mass element and it depends on the mass distribution and the form of the satellite. The TRS is created by changing of the linear momentum, which happens due to the interactions of solar photons with the satellite surface. The equilibrium points are gotten by the equation of rotational motion and the CRH is applied in the linear form of these equations. Simulations are developed for small and medium satellites, but the gotten equilibrium points are not stable by CRH. However, when some of the eigenvalues of the characteristic equation are analyzed, it is found some equilibrium points which can be pointed out as stables for an interval of the time, due to small magnitude of the real part of these eigenvalue

Análise geoambietal para o planejamento de obras civis lineares: uma abordagem por sensoriamento remoto orbital

Construction of linear engineering as, roads, ducts and multiducts as roads, has a strong feature of the diversity of land on which they are deployed. This diversity involves properties geological, geomorphological and structural variety. The purpose of this work is to characterize the physical environment in relation to their ability to support the implementation of civil works linear. To achieve this, the use of orbital remote sensing, in this case, Landsat - TM. Interpretative techniques are applied to images in order to assess the forms of relief and drainage found that they can set properties and have built a favorable meaning or not to implement these works. The results and thematic maps presented in this study allow us to promote the geoenvironmental analysis for the planning phase sustainable linear civil constructions (roads and multiducts)

Analisando a possibilidade de um anel ao redor de um satélite

On November 26 th, 2005, Rhea, one of Saturn's moons, is found by Cassini spacecraft approximately at 5.105 km from Saturn. Observations in situ reveal that electrons are depleted in the moon's vicinity. However, Rhea is considered massive enough to retain a thin atmosphere. Assumption was that the atmosphere of Rhea was not composed exclusively of gas, its likely contains solid material that can absorb magnetospheric particles. According to Jones et al. (2008), these particles were in a speci c position so that at the moment of observation the electrons could not be detected. In opposition to this idea there is a group, Tiscareno et al. 2010, Cornell University Library, that underwent intensive search for any material that might be orbiting Rhea using Cassini images, however the could not identify any. Second recommendation made by American researchers and other countries, and accepted by the National Board of Research the Cassini Equinox Mission will continue in orbit around Saturn until 2016.The probe will perform several maneuvers with high inclination to delve into the main ring system, and then enter in Saturn's atmosphere and collide with planet. This research is of great importance because until today no rings were found orbiting satellites. The goal of this work is to analyze the orbital evolution of a set of particles around Rhea disturbance of Saturn, J2 e J4 and check results by the numerical simulations and the possibility of a stable ring orbiting Rhea.

Imagens de satélite na análise da relação entre queimadas, aerossóis atmosféricos e precipitação

The direct and indirect effects of atmospheric aerossols in the amazonic climate have been focus of many published. This work aims to analyze a possible relation among Burns, atmospheric aerossols and precipitation above South America. It uses the avaluable data from the satellites AQUA/TERRA and TRMM and the images furnished by NOAA and GOES. These analysis can provide some explanations about the effects of emission of aerosols by burns on the composition of atmosphere and cloud formation, mainly in Amazon. We use the Aerosol Optical Depth (AOD) from MODIS/TERRA-AQUA, burns index from CPTEC and rain rate from TRMM. The data we use were obtained from 2000 until 2012. The study is divided in two parts. In the first one, it was performed a quantitative analysis between number of burns and aerosols emission. It was identified a great variability in space and time of the AOD on South America. On the north, northeast and center-west, the AOD is significant during the winter period, with peak on August and September. The southeast is affected by aerosols from center-west due to the dynamical transport. In the second part, it was evaluated the relation between AOD and precipitation in a 13-year period. The statistical analysis shows up a negative correlation of 0.72 between August and October, on Legal Amazon. These result indicate an inverse relation between AOD and rain rate. The other months present not significant correlation. These results are in a good agreement with the literature, in which in-situ methods were applied or combined with satellites data. The increasing of aerosols concentration in the atmosphere are reinforced during drier years. It can affect the increasing process of water drops, decreasing the precipitation. We also verified higher values of AOD (0.25 - 0.3) during years with El Niño, than the climatologically average (~0.15 - 0.2), ... (Complete abstract click electronic access below)

Transformada de Fourier: teoria como base para aplicações em mecânica celeste

Pós-graduação em Matemática Universitária - IGCE

Análise da cintilação ionosférica no Brasil empregando GNSS e técnicas de mineração e visualização de dados

Pós-graduação em Ciências Cartográficas - FCT

Avaliação das áreas de conflito de uso em APP na microbacia Ribeirão do Veado, Piratininga (SP) por meio de geotecnologias

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Modelos dinâmicos simplificados, para verificação do comportamento de rede de satélites amarrados por cabos flexíveis, usando-se o método explícito das diferenças finitas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudos sobre as defasagens de Prometeu e Pandora

Pós-graduação em Física - FEG

Controle ativo de estruturas reticuladas utilizando atuadores de pilha de pzt

Pós-graduação em Engenharia Mecânica - FEIS

Sistema GPS: uma órbita em evolução - número de satélites e periodicidade

The objective of this project was to monitor the satellites of the Global Positioning System (GPS) from a fixed point on Earth and to verify the rate of recurrence respect to their rotation and displacement. A topographic GPS signal receiver connected to a personal computer was used to recorded, for five days, the displacement of the satellites. This work was based on the fact that many literature references state that satellites complete one orbit around the Earth every 12 hours, then, it is assumed that the satellite would be seen twice in a day from the same fixed point on Earth.Although, this does not occur, as thise time interval correspond to 12 hours sidereal time and not solar time. In addition, this study was carried out in order toconfirm and update the information related to the number of satellites in operation today, found to be 31. In that sense, some references concerning the space segment of this system were defined in details.

Land cover classification of Lago Grande de Curuai floodplain (Amazon, Brazil) using multi-sensor and image fusion techniques

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)