Estudo do potencial de associações de ZnO com os produtos naturais ácido cafeico e ferúlico como filtros solares híbridos: [recurso eletrônico]

In this work were studied associations of ZnO with the natural products caffeic and feluric acids. Two preparation methods were used, that is, the sol-gel and a reflux procedure. In the sol-gel method, ZnO is produced by the basics hydrolysis of precursors in the presence of the organic filters (caffeic and feluric acids), which results in 30 nm (or less) ZnO particles with the organic filters (in dissociated form) bonded to the surface of ZnO. In the reflux method, a dispersion of ZnO in a water/ethanol mixture was kept under reflux (50oC/4h) in the presence of the organic acids. The ZnO particles used in the reflux method have a higher diameter than sol-gel ZnO particles, but the prepared associated product ZnO/Organic acids were similar. Despite of the difference in relation to crystallinity between the products, the preparation methods resulted in analogous associations with respect to the interaction of the organic filters with the ZnO surface. The caffeic/ZnO associations presented low photostability, which lead to the degradation of the organic filter. The other associations (feluric acid/ZnO) presented satisfactory results. The FT-IR spectroscopy confirmed the formation of the association, and the nature of the bond formed compared with the Zn-O bond in Zn2+/Felutic acid complexes. The isolated organic and inorganic filters, along with the associations were analyzed by diffuse reflectance spectroscopy and Uv-vis spectroscopy. The absorption edges and the critical wavelengths were analyzed and the effects of Zn-O bonds in feluric acid/ZnO associations described as a function of the relative position of the π/π* system of the organic filter. Finally the performance of the hybrid filters were investigated in terms of the absorption of UVA and UVB radiations, with the UVA/UVB ratio, an efficiency parameter largely used in the description of solar filters, sunscreen and suncare products

Geografia e novas tecnologias: o centro integrado de alertas de desastres naturais (CIADEN) como proposta de prática pedagógica para o ciclo I do ensino fundamental

This research work aims to analyze and understand the teaching of geography in the perspective of historical and critical pedagogy, with the object of analysis, the Center for Integrated Natural Disaster Alerts (CIADEN) for students in Cycle I of the Elementary School, located in Etec “Astor de Mattos Carvalho”, in Cabrália Paulista-SP. Deepening the knowledge of geography teaching in a critical and controversial about the bad weather and the use of new technologies to transform the social order and its relationship with the environment. Contributing to the students and the community have a new proposal for action from the content learned, capable of solving the present and future with respect to weather, climate and natural disasters. To implement a culture of prevention and risk perception, providing the diffusion of knowledge socially useful

Otimização do braço inferior da suspensão dianteira do veículo Baja utilizando o método dos elementos finitos

Mass reduction coupled with the mechanical performance in service has been the goal of many projects related to the transport area, considering the advantages that mass reduction can bring. However, make a simple material substitution without design a new geometry to corroborate for the best component performance, often makes the replacement unviable. In this study, it was investigated the advantages of replacing the prototype BAJA SAE front suspension lower arm of Equipe Piratas do Vale de BAJA SAE - Universidade Paulista, Campus Guaratinguetá, actually produced with steel, for a new component made of carbon fiber composite. The new geometry has been developed to provide the best possible performance for this component and your easy manufacturing. The study was done using the 3D modeling tools and computer simulations via finite element method. The first stage of this work consisted on calculation of the estimated maximum contact force tire / soil in a prototype landing after jump at one meter high, drop test in the laboratory with the current vehicle, current front suspension lower arm 3D modeling, finite element simulation and analysis of critical regions. After all current component analysis, a new geometry for the part in study was designed and simulated in order to reduce the component mass and provide a technological innovation using composite materials. With this work it was possible to obtain a theoretical component mass reduction of 25,15% maintaining the mechanical strength necessary for the appropriated component performance when incited

Preparação e caracterização de compósitos expandidos obtidos a partir de raspa de couro com borracha natural

Não disponível

Proposta de conector para ensaios de ligações CDE submetidas à tração perpendicular as fibras em madeira de pinus

The growth of urban population associated with the shortage of supply of public infrastructure such as hospitals, kindergartens, schools, among others, has reinforced the need to develop alternative methods that simplify the construction processes and allows for a reduction in these costs works. The conventional processes have increasingly been shown ineffective to solve the problem of demand for different types of urban and rural buildings. Given this fact, industrial construction processes can gain space and have proven to be highly interesting to solve the above problems, in particular, considering the cost-effective and time. Therefore, this study aimed to determine the influence of moisture on the strength of metal plate connections connectors (printed plate with teeth). For the sizing of the links between structural lumber using metal connectors with teeth prints; controlled process variables (drying of the wood and the different moisture contents), and finally found results and compare them with different literatures order to obtain a qualitative efficiency of the process. Some specimens had very low expectations, can be explained by the presence of bone marrow, and pre-existing cracks. Thus, the results were discarded for further analysis and more accurate results

Avaliação de sistemas de pultrudados com diferentes tipos de matrizes para aplicação em cabos condutores

In the last decades it has been observed a substantial developing of the electrical energy demand in the societies all over the World. In consequence the electrical energy distribution companies are increasing the quantity of electrical energy through the electrical energy conductor cables, which had grown the sag in the towers of energy transmission. Furthermore, the construction of more transmission towers brings a lot of troubles due environmental protection laws. In this way, looking forward to increase the quantity of electrical energy transmitted through electrical cables conductors, reduce the need of constructing new transmission towers and the sag in them, we suggest in this work the replace of the traditional core of the conductors cables commonly used, made of steel, by a core made by a composite material, which one is made by carbon fibers pultruded with polymeric resins as matrix. In a order to evaluate if the resins more commonly used in structural composites can be applied as matrix to make possible to use the composite material as a core, we made carbon fibers systems pultruded with epoxy, phenolic and polyester resins as matrix and a mechanic and physic-chemistry characterization was done on the systems by Tensile and Poisson tests, differential sprobe calorimetry (DSC), thermogravimetric analysis (TGA) and Fourier transformed infrared spectroscopy (FTIR), following their correspondents standards

Método de avaliação e biodegradação do poliacrilato de sódio

Polímeros são macromoléculas de alta massa molecular cada vez mais presentes nas atividades humanas. Estas moléculas são utilizadas com frequência para sintetizar plásticos, elastômeros e fibras. Os polímeros podem ser divididos em naturais e sintéticos. Os polímeros de origem natural são aqueles encontrados na natureza, como por exemplo: celulose, hemicelulose, glicogênio, proteínas, amido, lignina, entre outros. Os polímeros sintéticos são aqueles produzidos pela síntese química induzida pelo ser humano, como os diferentes tipos de plásticos. Contudo, alguns destes materiais sintéticos possuem alta durabilidade acarretando grande acúmulo de resíduos que contaminam o meio ambiente. O poliacrilato de sódio (PAS) é uma destas moléculas sintéticas que funciona como superabsorvente utilizado em grande escala nas fraldas descartáveis. A aplicação do PAS nas fraldas permitiu diminuir o volume deste material sem perda da eficácia. Cerca de 136 milhões de quilos de polímeros de poliacrilato são utilizados anualmente. Buscando diminuir a quantidade deste material no meio ambiente, são necessários estudos que viabilizem alternativas de sua decomposição. Dentre as opções viáveis está o processo de biodegradação, que é caracterizado pela ação de seres vivos, sobretudo os pertencentes ao grupo dos microrganismos (bactérias e fungos), que utilizam o material para retirar a energia para o seu desenvolvimento. Este projeto tem como objetivo avaliar a biodegradabilidade do poliacrilato de sódio (PAS) e modificar sua estrutura via degradação microbiana. Análises descritivas e comparativas são as bases para o estudo e compreensão da biodegradação do PAS. Para os testes de biodegradação serão utilizados microrganismos do solo e o fungo Aspergillus niger. Após 8 meses de biodegradação do composto enterrado pôde-se concluir através... (Resumo completo, clicar acesso eletrônico abaixo)

Uso dos recursos naturais em unidade de conservação de proteção integral: o caso do sertão do Ubatumirim, Núcleo Picinguaba do Parque Estadual da Serra do Mar

O Litoral Norte do Estado de São Paulo compõe uma região estratégica, notada pela importância de suas Áreas Protegidas (AP), sobretudo, pela presença humana em Unidades de Conservação (UC), um tema cada vez mais presente no debate sobre a proteção ambiental em territórios ocupados por grupos tradicionais que exercem uso diferenciado dos recursos naturais. Diante desse contexto, torna-se uma necessidade, viabilizar diretrizes para a gestão territorial ao possibilitar o compartilhamento das decisões acerca do uso do território, visando à conservação ambiental e proteção da cultura remanescente dos grupos sociais residentes no interior das UC. O presente trabalho busca dimensionar os aspectos de interação com o ambiente, através das formas de uso mantidas sobre os recursos naturais, como característica de reprodução sociocultural, premissa à proteção e manutenção do modo de vida das famílias residentes do Núcleo Picinguaba do Parque Estadual da Serra do Mar no município de Ubatuba-SP. No intuito de compatibilizar diretrizes para o planejamento da UC, evidenciou-se a relação da formação histórica da área, tal como, a interação exercida sobre ao ambiente e a resistência territorial, ao abordar a questão cultural e o modo de vida dos residentes tradicionais da Zona Histórico-Cultural Antropológica (ZHCAn) do Sertão do Ubatumirim. Foram sistematizadas informações para uma abordagem teórico-conceitual a respeito da cultura tradicional caiçara e do recorte geográfico do território, possibilitando a compreensão da dinâmica de produção do espaço em uma área ambientalmente protegida. A partir dessa caracterização da área foram indicadas zonas prioritárias ao planejamento territorial, voltado ao ordenamento ambiental e à gestão do uso dos recursos naturais em uma abordagem diferenciada na relação do ordenamento para as áreas...

Análise da influência da concentração de feixeis de fibras de bambu em ensaios de piso

Bamboo has one of the highest growth rates among plants, however, its lignifications (which confers resistance) takes around a few years and, therefore, certain physical characteristics and mechanical, that depend on this process will only be acquired between the three to six years old. In addition, bamboo also has significant density variations in different parts of the stem, both in the radial direction as the axial. In particular the radial direction, where the density found in the inner and outer (near the bark) of a single stem can range on average from 0.5 to 0.9 g/cm3. Thus, the application of bamboo as a floor, there to examine whether both sides of the bamboo (internal and external), provide resistance properties required for that purpose. In this study sought to characterize and quantify the influence of the concentration of fiber bundles in the inner and outer sides of rules or bamboo strips of bamboo flooring through testing service. Analyses performed were based on ASTM D 2394- 83 for wooden floors and derivatives. This was necessary because of the absence of a specific prohibition of the use and testing of floors made of bamboo and its products. The data were analyzed by ball indentation test shooting, test for resistance to abrasion, indentation test for stress / load treadmill test and by indentation loads applied to small areas - test the jump. The results of the tests were extremely friendly bamboo, even this presents considerable differences between the resistances obtained from assay of the cover of the inner and outer face, being comparable with those of many commonly used to manufacture wood flooring. This comparison was made possible by information from technical trials of several floors made with wood

Desenvolvimento regional e sustentabilidade: a indústria intensiva em recursos naturais na região administrativa de Ribeirão Preto

The natural resource intensive industries have moved from center to periphery in Brazil. This shift is related to the environmental impacts generated by this type of industry, as occur biggest benefits to these industries in small towns as tax exemptions and donations of land, and local institutional capacity is lower in pollution control. In the 1970s began, in the state of São Paulo, a process of industrial deconcentration of Metropolitan Region of São Paulo to the inside of state, which generated an intense industrialization of the region of Campinas, Ribeirão Preto, Sorocaba e São José dos Campos. This process of industrial deconcentration had support in state policies restricting new industries in the Metropolitan Region and the creation and financing of infrastructure and improvement of road. This research project aims to verify whether there has been a shift of natural resource intensive industries for the Administrative Region of Ribeirão Preto, as well as aspects of the sustainability of this process

Aplicação de coagulantes naturais no tratamento de lixiviado de resíduos urbanos

With the constant increase in the municipal solid waste (MSW) generation, mainly due to the high consumption patterns, it becomes difficult to manage correctly the solid waste and thus minimize their impact on the environment. One of the most problems of the large amount of waste generated is the liquid originated from physical, chemical and biological decomposition process of organic wastes, with dark color and bad smell, called leachate: it can reach the soil, polluting the groundwater and the surface water. Therefore, this study aimed to investigate the process of coagulation/flocculation/sedimentation applied in the treatment of the leachate generated in the not controlled landfill of Presidente Prudente, Sao Paulo... (Complete abstract click electronic access below)

Análise do comportamento do desgaste de dressadores de ponta única confeccionados com diamantes naturais e sintético piramidais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aproveitamento de sementes de abóboras (Cucurbita sp) como fonte alimentar

Brazil processes much of its fruit by producing natural juices, candy preserves, extracts and pulps; however, almost 60% of their total weight derives from peels, leaves and seeds. As a result, the emphasis lies most strongly on the use of waste, especially waste that is not commonly used by the food industry or by consumers. The use of seeds would increase the viable sources of raw materials, lower operating costs of industries and would promote the development of new food products, since they are our main sources of protein, fat, fiber, functional compounds, vitamins and minerals salts. This paper presents alternatives for the use of pumpkin seeds (Cucurbita sp), which are often underutilized or discarded. It also demonstrates the bioactive and anti-nutritional compounds and their health effects.

Comportamentos, térmico e mecânico, de compósitos de polipropileno e resíduo da hidrólise enzimática do bagaço de cana de açúcar

Pós-graduação em Engenharia Mecânica - FEG

Obtenção e caracterização térmica de compósitos nanoestruturados de resina fenol-furfurílica/CNT

Pós-graduação em Engenharia Mecânica - FEG