Repair Welding Effects on the Bending Fatigue Strength of AISI 4130 Aeronautical Steel used in a Critical to the Flight-Safety Structure

The aim of this study was to analyze the effect of successive TIG (tungsten inert gas) welding repairs on the reverse bending fatigue strength of AISI 4130 steel, which is widely used in components critical to the flight-safety. In order to simulate the abrupt maneuvers, wind bursts, motor vibration and helixes efforts, which generate cyclic bending loadings at the welded joints of a specific aircraft component called motor cradle, experimental reverse bending fatigue tests were carried out on specimens made from hot-rolled steel plate, 1.10 mm (0.043 in) thick, by mean of a SCHENK PWS equipment, with load ratio R = -1, under constant amplitude, at 30 Hz frequency and room temperature. It was observed that the bending fatigue strength decreases after the TIG (Tungsten Inert Gas) welding process application on AISI 4130 steel, with subsequent decrease due to re-welding sequence as well. Microstructural analyses and microhardness measurements on the base material, heat-affected zone (HAZ) and weld metal, as well as the effects of the weld bead geometry on the obtained results, have complemented this study.

3-D reconstruction by extended depth-of-field in failure analysis - Case study I: Qualitative fractographic investigation of fractured bolts in a partial valve

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Considerations about the welding repair effects on the structural integrity of an airframe critical to the flight-safety

Structures critical to the flight-safety are commonly submitted to several maintenance repairs at the welded joints in order to prolong the in-service life of aircrafts. The aim of this study is to analyze the effects of Tungsten Inert Gas (TIG) welding repair on the structural integrity of the AISI 4130 aeronautical steel by means of experimental fatigue crack growth tests in base-material, heat-affected zone (HAZ) and weld metal. The tests were performed on hot-rolled steel plate specimens, 0.89 mm thick, with load ratio R = 0.1, constant amplitude, at 10 Hz frequency and room temperature. Increase of the fracture resistance was observed in the weld metal but decreasing in the HAZ after repair. The results were associated to microhardness and microstructural changes with the welding sequence. (C) 2010 Published by Elsevier Ltd.

Comparative study between two techniques of incisional hernia repair with polypropylene mesh in rabbits

OBJETIVO: Comparar duas técnicas de tratamento da hérnia incisional em coelhos utilizando a tela de polipropileno apoiando um reforço peritônio - aponeurótico ou suturada nas bordas do anel herniário 'em ponte . MÉTODOS: Foram operados 60 coelhos para a produção de hérnia incisional, em uma incisão mediana de 4 centímetros. Após 30 dias, metade dos animais foram operados com o fechamento primário da parede, com colocação de uma tela de polipropileno apoiando o reforço e a outra metade dos animais com a colocação da tela suturada nas bordas do anel herniárioem ponte . Os animais foram avaliados com 30 (M1), 60 (M2)e 90 (M3) dias de pós-operatório. Os parâmetros analisados foram a evolução clínica, análise da força de ruptura da cicatriz, estudo macroscópico, análise microscópica e morfométrica. RESULTADOS: Não foram observadas diferenças significantes com relação a força de ruptura e estudos histológicos nos dois grupos e vários momentos estudados. Não houve diferença estatística com relação às complicações, embora os animais que receberam a telaem ponte tiveram aderências mais firmes e intensas à parede abdominal. CONCLUSÕES: As duas técnicas utilizadas para correção da hérnia incisional em coelhos não mostraram diferenças significantes quanto a força de ruptura, análise histológica e morfométrica. O número de complicações foi semelhante, porém a aderência de órgãos da cavidade abdominal à área de cicatriz foi muito mais intensa no grupo em que a tela foi colocadaem ponte .

Comparison of risk factors among blood donors, volunteers and replacement individuals, infected or not by hepatitis C virus

Hepatitis C is transmitted primarily parenterally by contaminated blood and is often associated with: intravenous drug abuse, invasive procedures, blood transfusions, acupuncture, tattooing, and alcohol and tobacco use. This study aimed to quantify and evaluate the risk factors among blood donors, volunteer blood donors and replacement individuals, infected or not by the C virus. The main transmission routes of C virus were identified in 55 men and 25 women (GI) monitored by the Ambulatory Unit of the Department of Tropical Diseases, Botucatu Medical School, and in 24 men and 26 women (GII), all active blood donors at the Bauru State Hospital Transfusional Agency. Both groups were similar in: tobacco and alcohol consumption, sexual behavior, tattooing and illicit drug use. The duration of alcohol and tobacco consumption and blood transfusions in GI were longer, whereas the option for steady partners, condom use, disposable materials and piercings were predominant in GII. In conclusion, the risk factors for hepatitis C demonstrate the necessity of health policies that act on the primary and secondary prevention levels (respectively, reduction of infection incidence and hepatopathy risk).

Vegetal polymer in repair of defects of the orbital floor: an experimental study in rabbits

Background: An experimental study was done to assess the ability of the vegetal polymer miniplates and screws to repair defects of the orbital floor.Methods: An artificial standard-sized defect was created in the bony floor of right orbit of 45 albino rabbits. The animals were divided into three experimental groups: control group (G1) involving animals with orbital floor defect and no treatment; titanium group (G2) containing animals with orbital floor defect repaired by titanium miniplates and screws; vegetal polymer group (G3) composed of animals with similar orbital floor defects repaired by vegetal polymer miniplates and screws. Throughout the course of the experiment, the animals were clinically evaluated. At 15, 30 and 60 days after surgery, the animals were killed. They were X-rayed immediately after the floor defect and at the moment of sacrifice. Histological and morphometric evaluation of inflammatory reaction and bone healing was done. Data were statistically evaluated.Results: No implants were extruded. Bone consolidation was similar in G2 and G3 and better than in G1 group animals. Inflammatory reaction was most pronounced in animals of G3 15 days after surgery, and it subsided over time.Conclusion: Vegetal polymer miniplates and screws induces small inflammatory reaction and had the ability to stimulate bone growth with good integration in the orbital floor defect allowing to consider the vegetal polymer adequate option to treat orbital floor defects. Future studies involving long-term follow-up and biomechanical tests to evaluate material resistance to traction are needed.

In vivo and in vitro evaluation of an Acetobacter xylinum synthesized microbial cellulose membrane intended for guided tissue repair

Background: Barrier materials as cellulose membranes are used for guided tissue repair. However, it is essential that the surrounding tissues accept the device. The present study histologically evaluated tissue reaction to a microbial cellulose membrane after subcutaneous implantation in mice. Furthermore, the interaction between mesenchymal stem cells and the biomaterial was studied in vitro to evaluate its ability to act as cellular scaffold for tissue engineering.Methods: Twenty-five Swiss Albino mice were used. A 10 x 10 mm cellulose membrane obtained through biosynthesis using Acetobacter xylinum bacteria was implanted into the lumbar subcutaneous tissue of each mouse. The mice were euthanatized at seven, 15, 30, 60, and 90 days, and the membrane and surrounding tissues were collected and examined by histology.Results: A mild inflammatory response without foreign body reaction was observed until 30 days post-surgery around the implanted membrane. Polarized microscopy revealed that the membrane remained intact at all evaluation points. Scanning electron microscopy of the cellulose membrane surface showed absence of pores. The in vitro evaluation of the interaction between cells and biomaterial was performed through viability staining analysis of the cells over the biomaterial, which showed that 95% of the mesenchymal stem cells aggregating to the cellulose membrane were alive and that 5% were necrotic. Scanning electron microscopy showed mesenchymal stem cells with normal morphology and attached to the cellulose membrane surface.Conclusion: The microbial cellulose membrane evaluated was found to be nonresorbable, induced a mild inflammatory response and may prove useful as a scaffold for mesenchymal stem cells.

Influence of diet on oxidative DNA damage, uracil misincorporation and DNA repair capability

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Late presentation of posterior urethral valve: two case reports

CONTEXTO: Válvula de uretra posterior (VUP) é uma conhecida malformação congênita urinária, geralmente diagnosticada em exames ultra-sonográficos pré-natais ou ao nascimento. Raramente, esta doença pode ser encontrada em adolescentes e em adultos. RELATO DE CASOS: Este artigo mostra dois casos de VUP, encontrados em um adolescente e em um adulto. Ambos apresentavam sinais clínicos de infecção do trato urinário e sintomas obstrutivos infravesicais. Os diagnósticos foram realizados por uretrocistografia miccional e uretrocistoscopia. Fulguração endoscópica das válvulas foi o tratamento de escolha para ambos os casos. O acompanhamento demonstrou melhora importante dos sintomas após o tratamento.

Two Surgical Approaches to Fracture Malunion Repair

Two birds were presented with malunion fractures. The first was a young toco toucan (Ramphastos toco) with malunion of the tarsometatarsus that was treated by an opening-corrective osteotomy and an acrylic-pin external skeletal fixator (type II) to stabilize the osteotomy. The second bird was m adult southern caracara (Caracara plancus) with radial and ulnar malunion that was treated by closing-wedge osteotomies. Stabilization of the osteotomy sites was accomplished through 1 bone plate fixed cranially on the ulna with 6 cortical screws and an interfragmentary single wire in radius. In both cases, the malunion was corrected, but the manus of the southern caracara was amputated because of carpal joint luxation that induced malposition of the feathers.

Evaluation of mammographic density and Tc-99m-sestamibi scintimammographic uptake in postmenopausal women on hormone replacement therapy

Objective: To evaluate changes in mammographic density and Tc-99m-sestamibi scintimammographic uptake in postmenopausal women on hormone replacement therapy (HRT).Methods: Seventy-five postmenopausal women were prospectively studied and allocated into three groups: 50 women were randomized to either Group 1 (G1, n = 25), which received 2 mg of 17 beta-oestradiol continuously combined with 1 mg of norethisterone acetate (E-2/NETA, Kliogest (R), Medley) or Group 2 (G2), which received 2.5 mg/day of tibolone (Livial (R), Organon). The remaining 25 women, who were asymptomatic and had no desire to undergo HRT, constituted the control group (G3). Each patient was submitted to both mammography and scintimammography at baseline and after six months. Mammographic density was evaluated by using the BI-RADS classification system. The classification system of Barros et al. was used in the interpretation of scintimammography. For statistical analysis, the Chi-square test, ANOVA and Pearson's correlation were used.Results: At six months, increased mammographic density was observed in 48% of G1, 12% of G2 and 16% of G3 patients (p < 0.001). The increase in sestamibi uptake was 56% in G1, 28% in G2 and 24% in G3 (p < 0.001). Increases in both density and uptake were significantly higher in the group on E-2/NETA than among tibolone users and the controls.Conclusion: In postmenopausal women, HRT with E-2/NETA was associated with increased mammographic density and increased Tc-99m-sestamibi scintimammographic uptakes, suggesting greater mithochondrial activity in the cells of the mammary duct. This was not observed in users of 2.5 mg of tibolone, demonstrating that the effects on the breast were reduced. The same was observed in the control group. (c) 2005 Elsevier B.V.. All rights reserved.

Improvement of embryo production by the replacement of the last two doses of porcine follicle-stimulating hormone with equine chorionic gonadotropin in Sindhi donors

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)