A comparison of the film thickness of two adhesive luting agents and the effect of thermocycling on their microTBs to feldspathic ceramic.

The aim of the present study was to evaluate the effect of thermocycling (TC) on the microtensile bond strength (microTBS) of two luting agents to feldspathic ceramic and to measure their film thickness (FT). For the microTBS test, sixteen blocks (6.4 x 6.4 x 4.8 mm) were fabricated using a feldspathic ceramic, etched with 10% hydrofluoric acid, rinsed and treated with the silane agent. The ceramic blocks were divided into two groups (n= 8): Gr1: dual-cured resin cement and Gr2: flowable resin. The luting agents were applied on the treated surfaces. Microsticks (1 +/-0. 1mm2) were prepared and stored under two conditions: dry, specimens immediately submitted to the microTBS test, and TC (6,000 cycles; 5 degrees C-55 degrees C). The microTBS was evaluated using a universal testing machine (1 mm/min). The microTBS data (MPa) were submitted to two-way ANOVA and Tukey' test (5%). For the FT test (ISO 4049), 0.05 ml of each luting agent (n=8) was pressed between two Mylar-covered glass plates (150 N) for 180 seconds and light polymerized. FT was measured using a digital paquimeter (Model 727-2001). The data (mm) were submitted to one-way ANOVA. The luting cement did not influence the microTBS results (p= 0.4467). Higher microtensile bond values were found after TC (20.5 +/- 8.6 MPa) compared to the dry condition (13.9 +/- 4. 7MPa), for both luting agents. The luting agents presented similar film thicknesses: Gr1- 0.052 +/- 0.016 mm; Gr2-0.041 +/- 0.003 mm. The luting agents presented similar film thickness and microTBS values, in dry and TC conditions and TC increased the bond strength regardless of the luting agent.

Pricing of reactive power support provided by distributed generators in transmission systems

Distributed Generation, microgrid technologies, two-way communication systems, and demand response programs are issues that are being studied in recent years within the concept of smart grids. At some level of enough penetration, the Distributed Generators (DGs) can provide benefits for sub-transmission and transmission systems through the so-called ancillary services. This work is focused on the ancillary service of reactive power support provided by DGs, specifically Wind Turbine Generators (WTGs), with high level of impact on transmission systems. The main objective of this work is to propose an optimization methodology to price this service by determining the costs in which a DG incurs when it loses sales opportunity of active power, i.e, by determining the Loss of Opportunity Costs (LOC). LOC occur when more reactive power is required than available, and the active power generation has to be reduced in order to increase the reactive power capacity. In the optimization process, three objectives are considered: active power generation costs of DGs, voltage stability margin of the system, and losses in the lines of the network. Uncertainties of WTGs are reduced solving multi-objective optimal power flows in multiple probabilistic scenarios constructed by Monte Carlo simulations, and modeling the time series associated with the active power generation of each WTG via Fuzzy Logic and Markov Chains. The proposed methodology was tested using the IEEE 14 bus test system with two WTGs installed. © 2011 IEEE.

Diabetes mellitus tipo 2 e esquema terapêutico: impacto da prática de atividades físicas sobre o custo do tratamento ambulatorial em Unidade Básica de Saúde da cidade de Bauru -SP

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Citotoxicidade trans-amelodentinária e alterações estruturais no esmalte após clareamento com géis caseiros a base de peróxido da carbamida

Pós-graduação em Reabilitação Oral - FOAR

Adaptações neuromusculares após um treinamento de caminhada em declive

Pós-graduação em Desenvolvimento Humano e Tecnologias - IBRC

Efeito da fadiga no andar de pacientes com doença de Parkinson: relação com o nível de atividade física

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência de protocolos de treino de equilíbrio no desempenho funcional de idosas com osteoporose

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of Sodium Ascorbate on Dentin Bonding After Two Bleaching Techniques

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Interactions of age and leg muscle fatigue on unobstructed walking and obstacle crossing

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of delayed start of light-curing on microtensile bond strengths of two adhesives bonded to dentin

The aim of the present study was to evaluate the microtensile bond strength to dentin (ATBS) of two total-etching adhesives applied with delays of 1-30 s for curing. Fifty extracted molar teeth were used. Occlusal enamel was sectioned to expose flat dentin surface, which was further polished with 600-grit paper for smear layer standardization. The specimens were divided into two groups, G1: Single Bond total-etching adhesive (SB), and G2: Prime & Bond NT total-etching adhesive (PB). Each group was further divided into 5 subgroups according to the delayed light-cure initiation after the adhesive systems application (n=5): Subgroup 1s - 1 s; Subgroup 5s -5 s; Subgroup 10s - 10 s; Subgroup 20s - 20 s; Subgroup 30s - 30 s. Composite resin cones 5 mm height and 10 mm in diameter were fabricated. Specimens were stored in distilled water at 37 degrees C for 24 h and sectioned to obtain 1 x 1 mm(2) transversal specimens. Specimens were thermocycled and mu TBS was measured. Data were submitted to two-way ANOVA (AdhesiveXDelay time) and Tukey's test. The level of significance was set at 5%. The results in mean MPa(+/- SD) for interaction between adhesive and delay time were: PB/1s - 23.82 +/- 2.54a; SB/5s - 19.52 +/- 2.67b; PB/5s - 18.56 +/- 3.06bc; SB/1s - 15.49 +/- 2.69cd; SB/20s - 16.33 +/- 2.55d; SB/10s - 13.88 +/- 1.67d; PB/10s - 11.04 +/- 1.28e; PB/30s - 10.89 +/- 1.31e; PB/20s - 10.24 +/- 2.33e; SB/30s - 9.19 +/- 1.91e. It was concluded that light-cure initiation timing of total-etching adhesives interferes negatively with mu TBS to dentin. (C) 2014 Elsevier Ltd. All rights reserved.

O papel dos consumidores residencias no ambiente das redes inteligentes: medidores eletrônicos de energia

Pós-graduação em Engenharia Mecânica - FEG

Feeding level and frequency for freshwater angelfish

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparison of analgesia provided by lidocaine, lidocaine-morphine or lidocaine-tramadol delivered epidurally in dogs following orchiectomy

ObjectiveTo evaluate and compare the postoperative analgesia provided by epidural lidocaine, lidocaine/morphine or lidocaine/tramadol in dogs following elective orchiectomy.Study designProspective experimental trial.AnimalsThirty-six mongrel dogs aged 2-8 years old, weighing 6.6-22 kg.MethodsThe dogs received 6.0 mg kg-1 of lidocaine combined with 1.0 mg kg-1 of tramadol, 0.1 mg kg-1 of morphine or 0.01 mL kg-1 of 0.9% NaCl epidurally. Analgesia was assessed at 4, 8, 12, 18 and 24 hours (T4, T8, T12 and T24) after the offset of lidocaine using a scale composed of physiologic and behavioral parameters. Rescue analgesia with morphine (0.2 mg kg-1, IM) was performed if the evaluation score exceeded 10 during the postoperative period. The scores over time were analyzed using the Friedman's two-way analysis of variance and the comparison between groups was made by the Kruskal-Wallis test with statistical significances accepted if p < 0.05.ResultsThere were no differences in the pain scores between the morphine and tramadol groups over time and no rescue analgesia was administered. In the NaCl group, rescue analgesia was needed at T4, T8 and T12. Within this group, the final evaluation times (T18 and T24) had lower pain scores than at T4, T8 and T12.Conclusions and clinical relevanceEpidural lidocaine/tramadol provided an analgesic effect comparable to that of epidural lidocaine/morphine during the first 12 hours after surgical castration without substantial side effects, suggesting that tramadol may be an effective postoperative analgesic in dogs submitted to this surgical procedure.

Efeito do corante Vermelho de sudan B na marcaçao e no desenvolvimento de Diatraea saccharalis ( Fabricius, 1794) (Lepidoptera: Crambidae) e de Cotesia flavipes (Cameron, 1891) ( Hymenoptera: Braconidae)

The objective of this work was to evaluate biological aspects of Diatraea saccharalis fed on artificial diet containing different concentrations of the Sudan B Red dye and the possibility to mark the parasitoid Cotesia flavipes, when submitted to the parasitism of dyed caterpillars. For that, were added to the artificial diet four concentrations of Sudan Red B dye (100, 200, 300 and 400 ppm) and control (no dye addition). It was evaluated larval and pupal period, larval and pupal viability, longevity, sex rate, pupal weigh, eggs per female, eggs per day, number of eggs per egg mass, egg viability and embrionary period; besides same were accomplished measurements in the caterpillars (bioassay I). Caterpillars of 17 days old (30) of each treatment were removed from the tubes and exposed to the parasitism of C. flavipes (bioassay 2). The egg-pupae period, sex rate, pupal period and viability, number of females, males, total of emerged adults and longevity were evaluated. The data were submitted to the multivariate analisys methods: cluster analysis, two-way and principal component analysis. Based on analysis, it was observed that the treatment of 100 ppm was the least harmful to the biology of the sugar cane borer larvae by groping to the control and did not influence negatively its biological aspects. The concentration of 400 ppm affected negatively the biology of C. flavipes. The Sudan Red B it is ended doses marked the caterpillars and the adults, however the concentration of 100 ppm is the most suitable to dye D. saccharalis. None of the tested concentration marked adults of C. flavipes, despite to affect negatively its biology. It is unviable to increase the concentration seeking futures tests, for that dye to be harmful to the biological aspects of D. saccharalis and C. flavipes.

Effects of aluminum on plant growth and nutrient uptake in young physic nut plants

Aluminum (Al3+) toxicity is a major limiting factor to crop productivity in acid soils. The effects of aluminum on root and shoot growth of physic nut (Jatropha curcas L.) young plants and, the uptake and distribution of phosphorus, calcium, magnesium and aluminum in the roots and shoots were investigated in the present study. Plants were grown in 2.5L pots in a greenhouse. After fourteen days of adaptation to nutrient solution, plants were exposed to Al concentrations of 0, 370, 740, 1,100 and 1,480 mu mol L-1, corresponding to an active Al3+ solution of 13.3, 35.3, 90.0, 153.3 and 220.7 mu mol L-1, respectively. The dry matter partitioning between roots, stems and leaves, and the concentrations of P, Ca, Mg and Al in plant tissue, were measured after 75 days exposure to Al. The increasing level of Al3+ activity in solution progressively decreased the growth of the shoot and root of physic nut plants, and at the two highest active Al3+ levels, plants showed morphological abnormalities typical of the toxicity caused by this metal. Higher Al3+ activity reduced P concentrations in leaves and Ca and Mg in leaves and roots of physic nut, demonstrating the effect of Al on the uptake, transport and use of these nutrients by plants. The Al accumulated preferentially in the roots of physic nut, whereas only a small amount was transported to shoots.