94 resultados para tetrahedral molybdate


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O tratamento de sementes com micronutrientes, como o molibdênio, garante uma maior uniformidade de aplicação, sendo que, a quantidade a ser aplicada desse elemento nas sementes deve ser suficiente para provir à exigência para o desenvolvimento e produção da cultura. Assim, objetivou-se com o presente trabalho avaliar a qualidade fisiológica de sementes de milho tratadas com molibdênio. A qualidade das sementes foi avaliada por meio da determinação do teor de água, do teste de germinação, da primeira contagem de germinação e da emissão de raízes primárias. Os tratamentos testados consistiram de cinco híbridos (DOW CO32; DOW 2B587; DOW 2B688; PIONEER 30F35 e PIONEER 30K73) e cinco doses de molibdênio aplicadas via semente (0; 7,5; 22,5; 67,5; 202,5 g ha-1 de molibdênio). A fonte de molibdênio utilizada foi o molibdato de sódio dihidratado (39% de molibdênio), sendo que a aplicação do molibdênio foi efetuada por meio da mistura com o fungicida líquido de suspensão concentrada carboxina+thiram sobre as sementes. A qualidade fisiológica das sementes de milho é influenciada negativamente por doses crescentes de molibdênio aplicadas. O híbrido de milho DOW 2B587 obteve melhor resposta à aplicação da maior dose de molibdênio em relação aos demais híbridos estudados.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The isotherms of adsorption of MeX2 (Me = Cu2+, Co2+; X = Cl-, Br-, ClO4-) by silica gel chemically modified with 2-mercaptoimidazole (SiMI) were studied in acetone and ethanol solutions, at 25 degrees C. Covalently attached 2-mercaptoimidazole molecule to silica gel surface adsorbs MeX2 from solvent by forming a surface complex. The metal is bonded to the surface through the nitrogen atom of attached 2-mercaptoimidazole. At low loading, the electronic and ESR spectral parameters indicated that the Cu2+ complexes are in a distorted-tetragonal symmetry field. The d-d electronic transition spectra showed that for Cu(ClO4)(2) complex, the peak of absorption did not change for any degree of metal loading and for Cl- and Br- complexes, the peak maxima shifted to higher energy with lower metal loading. The CoX2(X = Cl-, Br-, ClO4-) analogues possess a distorted-tetrahedral field.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The isotherms of adsorption of MX2 (M = Cu2+, Co2+; X = Cl-, Br-, ClO4) by silica gel chemically modified with 3-amino-1,2,4-triazole (SiATR) were studied in acetone and ethanol solutions, at 25 degrees C. The 3-amino-1,2,4-triazole molecule, covalently bound to the silica gel surface, adsorbs MX2 from solvent by forming a surface complex. At low loading, the electronic and electron spin resonance spectral parameters indicated that the Cu2+ complexes have distorted tetragonal symmetry. The CoX2 (X = Cl-, Br-) analogues exhibit a distorted-tetrahedral geometry, whilstthe (SiATR)mCo)ClO4)(2) complex has a tetragonally distorted octahedral geometry, with four equatorial nitrogen atoms around the cobalt. (C) 1998 Elsevier B.V. B.V. All rights reserved.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Among the nutrients that are essential for the biological nitrogen fixation by soybean plants, molybdenum stands out for being a cofactor of the nitrate reductase, affecting enzymatic activity and, consequently, the nodulation process. The research had as objective to evaluate the effects of molybdenum application on soybean nodulation and nitrate reductase activity. The experiment was conduced in greenhouse, sowing soybean in 12 L pots, with two plants per plot. The treatments consisted of two application via (with the seeds and leaf dressing) and two molybdenum doses (12 and 24 g ha(-1) with the seeds; 30 and 60 g ha(-1) leaf dressing) in ammonium molybdate form, plus the control. The number and dry mass of nodules and nitrogen content in soybean leaves were evaluated. Samples of leaves for the evaluation of nitrate reductase activity were taken at 10 a.m. and 10 p.m. It was concluded that soybean nodulation is affected by Mo dose and application via, resulting in higher number and weight of nodules when it is applied with the seeds. The enzymatic activity of the nitrate reductase is influenced by Mo fertilization and it is higher for leaf dressing with the double of the recommended dose.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Nickel ferrite powders with a nominal NiFe2O4 composition were synthesized by combustion reaction using urea as fuel. The powder was obtained using a vitreous silica basin heated directly on a hot plate at 480 degrees C until self-ignition occurred. After combustion, the powder was calcined at 700 degrees C for 2 h. The formation of the spinel phase and the distribution of cations in the tetrahedral and octahedral sites of the crystal structure were investigated by the Rietveld method, using synchrotron X-ray diffraction data and Mossbauer spectroscopy. The material presented a crystallite size of 120 nm and magnetic properties. The resulting stoichiometry after the Rietveld refinement was (Fe-0.989(2) Ni-0.011(2)) [Fe-1.012(2) Ni-0.989(2)] O-4.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this work, we report on the synthesis of SrMoO4 powders by co-precipitation method and processed in a microwave-hydrothermal at 413 K for 5 h. These powders were analyzed by X-ray diffraction (XRD), Fourier transform Raman (FT-Raman), ultraviolet-visible (UV-vis) absorption spectroscopy and photoluminescence (PL). XRD analyses revealed that the SrMoO4 powders are free of secondary phases and crystallize in a tetragonal structure. FT-Raman investigations showed the presence of Raman-active vibration modes correspondent for this molybdate. UV-vis technique was employed to determine the optical band gap of this material. SrMoO4 powders exhibit an intense PL emission at room temperature with maximum peak at 540 nm (green region) when excited by 488 nm wavelength of an argon ion laser. (C) 2007 Elsevier B.V. All rights reserved.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this work Ba0.99Eu0.01MoO4 (BEMO) powders were prepared by the first time by the Complex Polymerization Method. The structural and optical properties of the BEMO powders were characterized by Fourier Transform Infra-Red (FTIR), X-ray Diffraction (XRD), Raman Spectra, High-Resolution Scanning Electron Microscopy (HR-SEM) and Photoluminescent Measurements. XRD show a crystalline scheelite-type phase after the heat treatment at temperatures greater than 400 degrees C. The ionic radius of Eu3+ (0.109 nm) is lower than the Ba2+ (0.149 nm) one. This difference is responsible for the decrease in the lattice parameters of the BEMO compared to the pure BaMoO4 matrix. This little difference in the lattice parameters show that Eu3+ is expected to occupy the Ba2+ site at different temperatures, stayed the tetragonal (S-4) symmetry characteristic of scheelite-type crystalline structures of BaMoO4. The emission spectra of the samples, when excited at 394 nm, presented the D-5(1)-> F-7(0, 1 and 2) and D-5(0)-> F-7(0, 1, 2, 3 and 4) Eu3+ transitions at 523, 533, 554, 578, 589, 614, 652 and 699 nm, respectively. The emission spectra of the powders heat-treated at 800 and 900 degrees C showed a marked increase in its intensities compared to the materials heat-treated from 400 to 700 C. The decay times for the sample were evaluated and all of them presented the average value of 0.61 ms. Eu3+ luminescence decay time follows one exponential curve indicating the presence of only one type of Eu3+ symmetry site.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Thin films were prepared using glass precursors obtained in the ternary system NaPO(3)-BaF(2)-WO(3) and the binary system NaPO(3)-WO(3) with high concentrations of WO(3) (above 40% molar). Vitreous samples have been used as a target to prepare thin films. Such films were deposited using the electron beam evaporation method onto soda-lime glass substrates. Several structural characterizations were performed by Raman spectroscopy and X-ray Absorption Near Edge Spectroscopy (XANES) at the tungsten L(I) and L(III) absorption edges. XANES investigations showed that tungsten atoms are only sixfold coordinated (octahedral WO(6)) and that these films are free of tungstate tetrahedral units (WO(4)). In addition, Raman spectroscopy allowed identifying a break in the linear phosphate chains as the amount of WO(3) increases and the formation of P-O-W bonds in the films network indicating the intermediary behavior of WO(6) octahedra in the film network. Based on XANES data, we suggested a new attribution of several Raman absorption bands which allowed identifying the presence of W-O and W=O terminal bonds and a progressive apparition of W-O-W bridging bonds for the most WO(3) concentrated samples (above 40% molar) attributed to the formation of WO(6) clusters. (C) 2008 Elsevier B.V. All rights reserved.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O nitrogênio é o nutriente exigido em maior quantidade pelo feijoeiro e, mesmo quando suprida adequadamente desse nutriente, a planta de feijão pode ter sua produtividade limitada pela deficiência de molibdênio, pela participação deste no metabolismo do nitrogênio. O objetivo deste trabalho foi avaliar a resposta do feijoeiro (Phaseolus vulgaris L.), cultivar 'BRS Pontal', irrigado, à aplicação de nitrogênio em cobertura e molibdênio via foliar, quando cultivado em Neossolo Quartzarênico, no município de Cassilândia, MS. O delineamento experimental foi o de blocos ao acaso, no esquema fatorial 4x2, com quatro repetições. Os tratamentos foram constituídos de quatro doses de nitrogênio (0, 30, 60 e 120 kg ha-1) aplicados em cobertura, utilizando como fonte a ureia, e pela aplicação ou não de molibdênio (80 g ha-1) via foliar, na forma de molibdato de amônio. O índice relativo de clorofila nas folhas do feijoeiro foi aumentado pela aplicação de nitrogênio em cobertura e molibdênio via foliar. A aplicação de nitrogênio em cobertura proporcionou aumento na produtividade de grãos do feijoeiro apenas quando combinado com o fornecimento de molibdênio via foliar. O fornecimento de 80 g ha-1 de molibdênio via foliar aumentou a eficiência de utilização do nitrogênio pelo feijoeiro.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O nitrogênio é o nutriente mais exigido pelo feijoeiro e seu metabolismo pode ser seriamente prejudicado pela deficiência de molibdênio. Conduziu-se este trabalho, com o objetivo de avaliar o efeito da aplicação de molibdênio via semente e nitrogênio em cobertura nas características agronômicas e produtividade do feijoeiro 'BRS Pontal' irrigado, cultivado em Neossolo Quartzarênico, no município de Cassilândia, MS. O delineamento experimental utilizado foi o de blocos casualizados, no esquema fatorial 4x2, com quatro repetições. Os tratamentos foram constituídos pela aplicação ou não de Mo (80 g ha-1) via semente e quatro doses de N (0, 30, 60 e 120 kg ha-1), em cobertura aos 16 dias, após a emergência, na forma de uréia. A aplicação de Mo via semente aumentou o índice relativo de clorofila, o número de vagens por planta, a massa e a produtividade de grãos no feijoeiro, principalmente com o uso de altas doses de N em cobertura. O índice relativo de clorofila, o número de vagens por planta, a massa e a produtividade de grãos do feijoeiro foi aumentada linearmente pela aplicação de até 120 kg ha-1 de N em cobertura. O fornecimento de Mo via tratamento de semente aumentou a eficiência de utilização do N pelo feijoeiro.