Community-acquired methicillin-resistant Staphylococcus aureus (CA-MRSA): molecular background, virulence, and relevance for public health

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Risk factors for recovery of Imipenem-or ceftazidime-resistant Pseudomonas aeruginosa among patients admitted to a teaching hospital in Brazil

background. The prevalence of resistance to imipenem and ceftazidime among Pseudomonas aeruginosa isolates is increasing worldwide.objective. Risk factors for nosocomial recovery ( defined as the finding of culture- positive isolates after hospital admission) of imipenemresistant P. aeruginosa ( IRPA) and ceftazidime- resistant P. aeruginosa ( CRPA) were determined.design. Two separate case- control studies were conducted. Control subjects were matched to case patients ( ratio, 2: 1) on the basis of admission to the same ward at the same time as the case patient. Variables investigated included demographic characteristics, comorbid conditions, and the classes of antimicrobials used.setting. The study was conducted in a 400- bed general teaching hospital in Campinas, Brazil that has 14,500 admissions per year. Case patients and control subjects were selected from persons who were admitted to the hospital during 1992 - 2002.results. IRPA and CRPA isolates were obtained from 108 and 55 patients, respectively. Statistically significant risk factors for acquisition of IRPA were previous admission to another hospital ( odds ratio [ OR], 4.21 [ 95% confidence interval {CI}, 1.40- 12.66];), hemodialysis Pp. 01 ( OR, 7.79 [ 95% CI, 1.59- 38.16];), and therapy with imipenem ( OR, 18.51 [ 95% CI, 6.30- 54.43];), amikacin ( OR, 3.22 Pp. 01 P !.001 [ 95% CI, 1.40- 7.41];), and/ or vancomycin ( OR, 2.48 [ 95% CI, 1.08- 5.64];). Risk factors for recovery of CRPA were Pp. 005 Pp. 03 previous admission to another hospital ( OR, 18.69 [ 95% CI, 2.00- 174.28];) and amikacin use ( OR, 3.69 [ 95% CI, 1.32- 10.35]; Pp. 01). Pp. 01conclusion. Our study suggests a definite role for several classes of antimicrobials as risk factors for recovery of IRPA but not for recovery of CRPA. Limiting the use of only imipenem and ceftazidime may not be a wise strategy to contain the spread of resistant P. aeruginosa strains.

Antimicrobial use and incidence of multidrug-resistant Pseudomonas aeruginosa in a teaching hospital: an ecological approach

Introduction: Multidrug-resistant Pseudomonas aeruginosa is a major threat in healthcare settings. The use of antimicrobials can influence the incidence of resistant strains by direct and indirect mechanisms. The latter can be addressed by ecological studies. Methods: Our group attempted to analyze the relation between the use of antipseudomonal drugs and the incidence of MDR-PA among 18 units from a 400-bed teaching hospital. The study had a retrospective, ecological design, comprising data from 2004 and 2005. Data on the use of four antimicrobials (amikacin, ciprofloxacin, ceftazidime and imipenem) were tested for correlation with the incidence of MDR-PA (defined as isolates resistant to the four antimicrobials of interest) in clinical cultures. Univariate and multivariate linear regression analyses were performed. Results: Significant correlations were determined between use and resistance for all antimicrobials in the univariate analysis: amikacin (standardized correlation coefficient = 0.73, p = 0.001); ciprofloxacin (0.71, p = 0.001); ceftazidime (0.61, p = 0.007) and imipenem (0.87, p < 0.001). In multivariate analysis, only imipenem (0.67, p = 0.01) was independently related to the incidence of multidrug-resistant strains. Conclusions: These findings share similarities with those reported in individual-based observational studies, with possible implications for infection control.

Trends in multidrug-resistant tuberculosis

Multidrug-resistant tuberculosis (MDR-TB) is an increasing global problem. The extent and burden of MDR-TB varies significantly from country to country and region to region. Globally, about three per cent of all newly diagnosed patients have MDR-TB and the proportion is higher in patients who had previously received anti-tuberculosis (anti-TB) treatment reflecting the failure of programs designed to ensure complete cure of patients with tuberculosis. The management of MDR-TB is a challenge that should be undertaken by experienced clinicians at centers equipped with reliable laboratory services and implementation of DOTS-Plus strategy.

Risk factors for acquisition of Methicillin-resistant Staphylococcus aureus among patients from a burn unit in Brazil

Methicillin-resistant Staphylococcus aureus (MRSA) is an important agent of colonization and infection in burn units. in order to identify risk factors for MRSA acquisition in a Brazilian burn unit, we performed two retrospective studies. In the first ("cohort" study), 175 patients who were not colonized with MRSA on admission were followed to assess risk factors for MRSA acquisition. in the second ("case-case-control" study), 143 individuals from the previous study who were negative for both MRSA and Methicillin-susceptible S. aureus (MSSA) on admission were followed. Case-control studies were performed to investigate risk factors for MRSA and MSSA acquisition. MRSA and MSSA were recovered from 75 and 23 patients, respectively. In the "cohort" study, only the number of wound excisions (Odds Ratio [OR] = 1.55, 95% Confidence Interval [CI] = 1.21-1.98, P = 0.001) was associated with MRSA acquisition. in the "case-case-control" study, burns involving head (OR=3.43, 95%CI = 1.50-7.81, P = 0.003) and the number of wound excisions (OR = 1.83, 95%CI = 1.27-2.63, P = 0.001) were significant risk factors for MRSA. Burns involving perineum were negatively associated with MSSA acquisition (OR = 0.16, 95%CI = 0.03-0.75, P = 0.02). In conclusion, the acquisition of MRSA was related to the site of the burn and to the surgical manipulation of tissues, but not to the use of antimicrobials. (C) 2009 Elsevier Ltd and ISBI. All rights reserved.

Removable Partial Denture in Combination with a Milled Fixed Partial Prosthesis as Interim Restorations in Long-Term Treatment

Interim restorations are frequently used in prosthodontic treatments. Many complex situations require the combination of fixed and removable partial prostheses. An appropriate interim restoration design that accurately implements the treatment plan is necessary to prepare the oral cavity for the prostheses, and to contribute to the preservation and health of remaining natural teeth, bone support, and gingival tissues. This report describes a modified technique for construction of interim restorations with a combination of fixed and removable partial prostheses. The technique consists of the construction of a milled fixed prosthesis and removable partial denture with metallic framework for use during extensive treatment, improving masticatory function and esthetics and preserving the periodontal health of supporting structures. This interim restoration can also serve as a template for the definitive restoration, allowing patient and dentist to evaluate appearance and function and helping to ensure the success of the definitive restoration.

Factors to Achieve Aesthetics in All-Ceramic Restorations

The demand for aesthetic restorations has increased during the last years. Dental ceramics are a successful alternative for some cases because of aesthetics and biocompatibility. Therefore, the aim of this literature review was to present the factors necessary to fabricate all-ceramic restorations with aesthetics similar to natural dentition. A search of English-language peer-review literature was completed using MEDLINE database from 1975 to 2009 including the keywords "aesthetic," "metal-free crown," "all-ceramic," and "color." It was observed that several factors influence aesthetics of all-ceramic restorations. Color scale, light source during color evaluation, characteristic of core material, color of supporting tooth, presence of root post, and type of cement are clinical factors that may influence color of the restorations. Laboratorial factors as technique for ceramic condensation, thickness, temperature, and number of firing cycles also influence the result of these crowns. Although several clinical and laboratorial factors influence aesthetics of all-ceramic restorations, the aesthetic success and longevity of these restorations depend on the integration with surrounding periodontal tissue.

Mechanical behavior of ceramic veneer in zirconia-based restorations: a 3-dimensional finite element analysis using microcomputed tomography data

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Short Implant to Support Maxillary Restorations: Bone Stress Analysis Using Regular and Switching Platform

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of fluid resins on the surface roughness and topography of resin composite restorations analyzed by atomic force microscope

The aim of the study was to verify the influence of surface sealants on the surface roughness of resin composite restorations before and after mechanical toothbrushing, and evaluate the superficial topography using atomic force microscope. Five surface sealers were used: Single Bond, Opti Bond Solo Plus, Fortify, Fortify Plus and control, without any sealer agent. The lowest values of surface roughness were obtained for control, Single Bond and Fortify groups before toothbrushing. Fortify and Fortify Plus were the sealer agents that support the abrasive action caused by the toothbrushing although Fortify Plus group remained with high values of surface roughness. The application of specific surface sealants could be a useful clinical procedure to maintain the quality of resin-based composite restorations. (C) 2010 Elsevier Ltd. All rights reserved.

Optical Impression Systems for CAD-CAM Restorations

Computer-aided design/computer-aided manufacturing images can be taken through either direct or indirect imaging. For the indirect systems, the digitalization is obtained from the impression material or cast, and for the direct ones the image is taken directly from the mouth using intraoral scanners.The direct acquisition systems have been constantly improved because these are less invasive, quicker, and more precise than the conventional method. Besides, the digital images can be easily stored for a long time. Therefore, the aim of this paper was to describe and discuss based on the literature the main direct image acquisition systems available on the market: CEREC Bluecam (Sirona), Lava C.O.S. System (3M ESPE), iTero System (Cadent/Straumann), and E4D System (D4D Technologies).

Effect of different adhesive systems on microleakage in class II composite resin restorations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Microleakage of adhesively bonded cervical amalgam restorations

Purpose: To evaluate dye penetration in adhesively bonded cervical amalgam restorations. Materials and Methods: the specimens were randomly divided into four groups and the adhesives Prime & Bond 2. 1, Prime & Bond 2.1 Dual Cure, Scotchbond Multi Purpose Plus and Amalgambond Plus were tested. After being restored and polished, the teeth were thermocycled 1,000 times at temperatures varying between 5degreesC +/- 2degreesC and 55degreesC +/- 2degreesC. Statistical analysis was carried out using the Kruskal-Wallis test and multiple comparisons. Results: Scotchbond Multi-Purpose Plus demonstrated lower levels of microleakage in enamel and dentin. The dual adhesives were more effective than the one bottle adhesive.

Clinical assessment of postoperative sensitivity in posterior composite restorations

This incidence of postoperative sensitivity was evaluated in resin-based posterior restorations. Two hundred and ninety-two direct restorations were evaluated in premolars and molars. A total of 143 Class I and 149 Class 11 restorations (MO/OD and MOD) were placed in patients ranging in age from 30 to 50 years. After the cavity preparations were completed, a rubber dam was placed, and the preparations were restored using a total-etch system (Prime & Bond NT) and a resin-based restorative material (TPH Spectrum). The patients were contacted after 24 hours and 7, 30 and 90 days postoperatively and questioned regarding the presence of sensitivity and the stimuli that triggered that sensitivity. The Chi-square and Fisher's Exact Test were used for statistical analysis. Evaluation at 24 hours after restorative treatment revealed statistically significant differences among the types of cavity preparations restored and the occurrence of postoperative sensitivity (p=0.0003), with a higher frequency of sensitivity in Class H MOD restorations (26%), followed by Class II MO/DO (15%) and Class I restorations (5%). At 7, 30 and 90 days after restorative treatment, there was a decrease in the occurrence of sensitivity for all groups. The percentage of sensitivity among the groups was not significantly different. This study shows that the occurrence of sensitivity is correlated with the complexity of the restoration.