Management of an Unusual Presentation of Ascher Syndrome

Ascher syndrome is defined by the association between double lip, blepharochalasis, and nontoxic goiter. Because it is a rare disease, it is most often misdiagnosed, despite its implications for quality of life. We report a variation of an incomplete type of Ascher syndrome affecting the upper lip, upper eyelids, and lateral canthi of a young male patient. The surgical management, follow-up, and a brief overview of the syndrome are described. The results presented show an aesthetic and functional improvement of the facial deformities.

Determination of neutral polymorphisms (frameworks) of the human beta globin gene in beta thalassaemias by PCR/DGGE

Purpose: Considering the importance of type beta thalassaemias as hereditary syndromes of high significance in different populations of Mediterranean origin and, by extension, in the Brazilian population, the objective of the present study was to determine by PCR/DGGE the gene structures responsible for neutral polymorphisms (frameworks) observed in the human beta globin gene associated with the mutations responsible for type beta thalassaemias in a sample of the Brazilian population and, more specifically, of the population of the State of São Paulo. Patients and methods: Thirty individuals with beta thalassaemic mutations were analyzed: 22 mutations were in codon 39 (C->T), 5 in IVS1-110 (G->A), 2 in IVS1-6 (T->C) and 1 in IVS1-1 (G->A). DNA was extracted and selective amplification was performed by PCR extending from position IVS1 nt 46 to IVS2 nt 126 (474 pb). The product was then analyzed by polyacrylamide gel electrophoresis on a denaturing 10-60% urea/formamide gradient. Results: The results demonstrated that, as expected, the mutations responsible for type beta thalassaemia observed in this population are of Mediterranean origin, with 73% distribution represented by codon 39,17% by IVS1-110, 7% by IVS1-6 and 3% by IVS1-1. In turn, framework distribution seems to indicate a higher frequency of Fr 1-1 in codon 39 and IVS1-110, of Fr 1-3 in IVS1-6 and of Fr 1-2 in IVS1-1. Conclusions: These results permit us to conclude that gene amplification by PCR followed by DGGE is an appropriate method for the separation of DNA molecules that differ even by a single base change and therefore can be utilized to detect the alterations observed in the human beta globin gene. This methodology shows that, using only a pair of primers, it is possible to define the frameworks that are observed in the beta globin gene.

Influence of thermal and mechanical cycling on the flexural strength of ceramics with titanium or gold alloy frameworks

Objectives: The aim of this study was to evaluate the effect of thermal and mechanical cycling alone or in combination, on the flexural strength of ceramic and metallic frameworks cast in gold alloy or titanium. Methods: Metallic frameworks (25 mm × 3 mm × 0.5 mm) (N = 96) cast in gold alloy or commercial pure titanium (Ti cp) were obtained using acrylic templates. They were airborne particle-abraded with 150 μm aluminum oxide at the central area of the frameworks (8 mm × 3 mm). Bonding agent and opaque were applied on the particle-abraded surfaces and the corresponding ceramic for each metal was fired onto them. The thickness of the ceramic layer was standardized by positioning the frameworks in a metallic template (height: 1 mm). The specimens from each ceramic-metal combination (N = 96, n = 12 per group) were randomly assigned into four experimental fatigue conditions, namely water storage at 37 °C for 24 h (control group), thermal cycling (3000 cycles, between 4 and 55 °C, dwell time: 10 s), mechanical cycling (20,000 cycles under 10 N load, immersion in distilled water at 37 °C) and, thermal and mechanical cycling. A flexural strength test was performed in a universal testing machine (crosshead speed: 1.5 mm/min). Data were statistically analyzed using two-way ANOVA and Tukey's test (α = 0.05). Results: The mean flexural strength values for the ceramic-gold alloy combination (55 ± 7.2 MPa) were significantly higher than those of the ceramic-Ti cp combination (32 ± 6.7 MPa) regardless of the fatigue conditions performed (p < 0.05). Mechanical and thermo-mechanical fatigue decreased the flexural strength results significantly for both ceramic-gold alloy (52 ± 6.6 and 53 ± 5.6 MPa, respectively) and ceramic-Ti cp combinations (29 ± 6.8 and 29 ± 6.8 MPa, respectively) compared to the control group (58 ± 7.8 and 39 ± 5.1 MPa, for gold and Ti cp, respectively) (p < 0.05) (Tukey's test). While ceramic-Ti cp combinations failed adhesively at the metal-opaque interface, gold alloy frameworks exhibited a residue of ceramic material on the surface in all experimental groups. Significance: Mechanical and thermo-mechanical fatigue conditions decreased the flexural strength values for both ceramic-gold alloy and ceramic-Ti cp combinations with the results being significantly lower for the latter in all experimental conditions. © 2007 Academy of Dental Materials.

Post-ganglionic Horner's syndrome: An unusual presentation of non-Hodgkin lymphoma

In this paper, we present the rare case of a patient with cervical lymphadenopathy diagnosed as a T-cell-rich B-cell non-Hodgkin lymphoma that manifested Horner's syndrome due to a post-ganglionic sympathetic neuron lesion caused by the tumor. Copyright © 2012 S. Karger AG, Basel.

Unusual presentation of oral squamous cell carcinoma in a young woman

Oral squamous cell carcinoma (OSCC) is the most common oral malignant neoplasm, mainly affecting individuals over 50 years old with a history of tobacco and alcohol use. The occurrence of this oral cancer in individuals under 40 years old is unusual and, when it does occur, shows a weaker relation to those risk factors and a more aggressive clinical course. Due to the paucity of reports in this population, it is difficult to prove its increasing trend. A case of oral squamous cell carcinoma in a 39-year-old woman with no history of tobacco or alcohol use is reported. Clinical and histopathological findings, aetiology, and treatment are discussed. The increasing trend of oral squamous cell carcinoma in young women without known risk factors highlights the need for clinicians to be prepared to diagnose this lesion quickly and precisely, providing a better prognosis, chance of survival, and quality of life for the patient.

Sinking skin flap syndrome with delayed dysautonomic syndrome - An atypical presentation

INTRODUCTION Sinking skin flap syndrome or syndrome of the trephined is a rare complication after a large craniectomy, with a sunken skin above the bone defect with neurological symptoms such as severe headache, mental changes, focal deficits, or seizures. PRESENTATION OF CASE We report a case of 21 years old man with trefinated syndrome showing delayed dysautonomic changes. DISCUSSION Our patient had a large bone flap defect and a VP shunt that constitute risk factors to develop this syndrome. Also, there is reabsorption of bone tissue while it is placed in subcutaneous tissue. The principal symptoms of sinking skin flap syndrome are severe headache, mental changes, focal deficits, or seizures. Our patient presented with a delayed dysautonomic syndrome, with signs and symptoms very characteristics. Only few cases of this syndrome were related in literature and none were presented with dysautonomic syndrome. CONCLUSION We reported here a very uncommon case of sinking skill flap syndrome that causes a severe dysautonomic syndrome and worsening the patient condition. © 2013 The Authors.

Intraoral schwannomas: Presentation of a series of 12 cases

Introduction: Schwannomas are benign and not very frequent tumors of the peripheral nerves, derived from the nerve supporting Schwann cells. Study Design: Data were collected on the clinical manifestations (sex, age), location, size and symptonts of the lesions as well as the evolution time and the initial (presumption) diagnosis. Results: Twelve patients were documented, with a mean age of 29,5 ± 12,1 years (range 16-50) and a balanced gender distribution. The mean duration of the lesions was 42,17± 45,3 months. The lesion located in the floor of the mouth was the largest tumor, measuring about 4 cm in maximum diameter, while the average size of the 12 schwannomas was 2.04± 1.1 cm. Conclusion: We present 12 oral schwannomas diagnosed and treated over a period of 10 years. © Medicina Oral S. L. C.I.F. B 96689336 - eISSN: 1989-5488.

Telejornalismo e cidadania: análise do Jornal Nacional e do Jornal da Cultura

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Chronic graft-versus-host disease: clinical presentation of multiple lesions of lichenoid and atrophic pattern

Graft-versus-host disease is observed mainly in recipients of hematopoietic cell transplantation and is expressed by cutaneous or systemic signals and symptoms. Graft-versus-host disease is clinically classified as acute or chronic. Chronic Graft-versus-host disease occurs in up to 70% of hematopoietic cell transplanted patients and its clinical manifestations have important impact on morbidity and quality of life. The authors report an expressive cutaneous, oral and adnexal involvement in a patient with chronic Graft-versus-host disease with multiple lesions of lichenoid and atrophic pattern.

A MICROSTRAIN COMPARISON OF PASSIVELY FITTING SCREW-RETAINED AND CEMENTED TITANIUM FRAMEWORKS

Statement of problem. An imprecise fit between frameworks and supporting dental implants in loaded protocols increases the strain transferred to the periimplant bone, which may impair healing or generate microgaps.Purpose. The purpose of this study was to investigate the microstrain between premachined 1-piece screw-retained frameworks (group STF) and screw-retained frameworks fabricated by cementing titanium cylinders to the prefabricated framework (group CTF). This procedure was developed to correct the misfit between frameworks and loaded implants.Material and methods. Four internal hexagon cylindrical implants were placed 10 mm apart in a polyurethane block by using the surgical guides of the corresponding implant system. Previously fabricated titanium frameworks (n=10) were divided into 2 groups. In group STF, prefabricated machined frameworks were used (n=5), and, in group CTF, the frameworks were fabricated by using a passive fit procedure, which was developed to correct the misfit between the cast titanium frameworks and supporting dental implants (n=5). Both groups were screw-retained under torque control (10 Ncm). Six strain gauges were placed on the upper surface of the polyurethane block, and 3 strain measurements were recorded for each framework. Data were analyzed with the Student t test (alpha=.05).Results. The mean microstrain values between the framework and the implants were significantly higher for group STF (2517 me) than for group CTF (844 me) (P<.05).Conclusions. Complete-arch implant frameworks designed for load application and fabricated by using the passive fit procedure decreased the strain between the frameworks and implants more than 1 piece prefabricated machined frameworks.

An alternative technique for fabrication of frameworks in an immediate loading implant fixed mandibular prosthesis

The oral rehabilitation of edentulous patients with immediate loading has become a safe procedure with high predictability. The success is related to immediate fabrication of a passive fit framework to attach the implants. Based on these considerations, this case report shows an alternative technique for mandibular rehabilitation using implants immediately loaded, where the framework was fabricated using cylinders with internal reinforcement and precast pieces, electrowelding, and conventional welding providing esthetics and function to the patient in a short period of time.

Changing presentation of complete hydatidiform mole at the New England Trophoblastic Disease Center over the past three decades: does early diagnosis alter risk for gestational trophoblastic neoplasia?

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Synthesis, structural characterization, luminescent properties and theoretical study of three novel lanthanide metal-organic frameworks of Ho(III), Gd(III) and Eu(III) with 2,5-thiophenedicarboxylate anion

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Disseminated cutaneous histoplasmosis in elderly patients. An uncommon presentation

Background: Human fungal infections have increased at an alarming rate in recent years, particularly in immunocompromised individuals. Cryptococcosis is the second most prevalent systemic fungal infection worldwide, and the most prevalent systemic infection in immunocompromised individuals, representing more than 70% of cases. The incidence of cryptococcosis is high in people with HIV/acquired immunodefi- ciency syndrome (AIDS), with recent estimates indicating that there are one million cases of cryptococcal meningitis globally per year in AIDS patients. Aims: The aim of this research was to develop a rapid flow cytometric antifungal susceptibility test and to compare the results with the standard methods. Methods: A reference strain and clinical isolates of Cryptococcus neoformans and Cryptococcus gattii were tested for susceptibility to amphotericin B by flow cytometry using propidium iodide as indicator of viability. Flow cytometry (FC) results were compared with the minimum inhibitory concentration (MIC) values determined by microdilution. Results: The antifungal activity of amphotericin B ranged from MICs of 0.06 to 2 g/ml for the 11 isolates studied. The same results were found by FC. Conclusions: The FC method allows same-day results, assisting in the selection of appropriate antifungal therapies. These results demonstrate an excellent correlation between FC and the classic methods of testing for susceptibility to antifungal agents. This rapid diagnosis method makes it possible to quickly administer effective therapeutic interventions, often saving lives.