Analysis of hybrid waste-to-energy for medium-sized cities

Urban centers have a huge demand for electricity and the growing problem of the solid waste management generated by their population, a relevant social and administrative problem. The correct disposal of the municipal solid waste (MSW) generated in cities is one of the most complex engineering problems that involves logistics, safety, environmental and energetic aspects for its adequate management. Due to a national policy of solid wastes recently promulgated, Brazilian cities are evaluating the technical and economic feasibility of incinerating the non-recyclable waste. São José dos Campos, a São Paulo State industrialized city, is considering the composting of organic waste for biogas production and mass incineration of non-recyclable waste. This paper presents a waste-to-energy system based on the integration of gas turbines to a MSW incinerator for producing thermal and electric energy as an alternative solution for the solid waste disposal in São José dos Campos, SP. A technical and economic feasibility study for the hybrid combined cycle plant is presented and revealed to be attractive when carbon credit and waste tax are included in the project income. © 2013 Elsevier Ltd.

Prospects for the use of municipal tree pruning wastes in particleboard production

The purpose of this study was to evaluate the physical and mechanical properties of particleboard made with pruning wastes from Ipê (Tabebuia serratifolia) and Chapéu-de-Sol (Terminalia catappa) trees. Particleboards were prepared with both wood species, using all the material produced by grinding the pruning wastes. The particleboards had dimensions of 45×45 cm, a thickness of approximately 11.5 mm and an average density of 664 kg/m3. A urea-formaldehyde adhesive was used in the proportion of 12% of the dry particle mass. The particleboards were pressed at a temperature of 130 C for 10 mins. The physical and mechanical properties analyzed were density, moisture content, thickness swelling, percentage of lignin and cellulose, modulus of resilience, modulus of elasticity and tensile strength parallel to the grain, accordingly to the standards NBR 14810 and CS 236-66 (1968). The particleboards were considered to be of medium density. The particle size significantly affected the static bending strength and tensile strength parallel to the grain. Ipê presented better results, demonstrating a potential for the production and use of particleboard made from this species. © The Author(s) 2013.

A geração de resíduos sólidos urbanos e sua influência na gestão urbano-ambiental municipal de Sorocaba/SP

In Brazil, rates of urban solid waste generation increase proportionally more than the annual growing of the population. The government, from its federal authority to the municipal spheres, faces increasing challenges for Urban and Environmental management regarding to solid waste in general and, in particular, municipal solid waste. Financial problems added to public health problems that worsen with the serious environmental impacts generated every year. In August 2010 Brazil the PNRS (National Policy on Solid Waste) was approved and sanctioned in which represented a true watershed in the country as a legal framework extremely ambitious and visionary. This work presents the successes and challenges that the municipality of Sorocaba/SP is facing after more than three years of PNRS sanctioned to conduct an Urban and Environmental management suited to the new legal bases towards the subject of solid waste. The results show a large gap between the content proposed by the law and the technical, financial and temporal reality to practical implementation by the municipal government. New legislation and federal incentives, consortiums among the cities, flexible deadlines and environmental education at all levels are certainly some proposals to catalyze processes that aim to solve and overcome the challenges of solid waste

A política nacional de resíduos sólidos e o plano diretor municipal de Rio Claro/SP: o uso como instrumento para a gestão urbano-ambiental municipal

Due to the large economic development associated with the growing consumerist lifestyle of our capitalist society, the problem of uncontrolled solid waste generation worsens, which one is considered to be one of the main responsible factors for environmental degradation. As a case study and in order to solve the problem of large generation of municipal solid waste, this work aims to study the “plano diretor” of Rio Claro city, São Paulo. The “plano diretor” is a municipal law that provides guidelines for the administration of the city, which include guidelines for the management of solid waste generated in the city. The guidelines required in order to write the “plano diretor” are provided by the national law “estatuto da cidade”, providing information for the planning and development of the cities, as well as the management of the urban environment. However, only the “estatuto da cidade” does not provide enough instructions for creating management plans in order to solve the many problems from the urban environment. Thus, studies have been done about urban and environmental management, to understand how municipal management plans should be structured. As a form of seeking information that can complement the “plano diretor” to the creation of policies for managing solid waste of the city, the “Política Nacional de Resíduos Sólidos”(PNRS) emerges in 2010 as a document which provides principles, objectives and guidelines to create plans for Solid Waste Management at the national, state, regional and municipal levels. Therefore, it was possible to make a joint analysis of the “plano diretor” of Rio Claro with the PNRS to identify what is already done within the municipality about the solid waste management, and identify which aspects are most significant in the municipal solid waste management that the national policy provides. Yet studies have been done on the current municipal solid waste management...

Characterization and thermal study of organic extracts of urban solid waste

The urban residues put in landfill of the city of Sa˜o Carlos-SP, Brazil, in 2004 represent 58.7 % of decomposed organic material. The aim of this research was to characterize samples of urban solid waste and its organic extracts targeting the use of this residue without damaging the environment. The curves were obtained in a nitrogen atmosphere, a heating rate of 20 C min-1 , the temperature of 30–600 C. In the original sample after humidity loss, an event occured concerning the water constitution in the TG curve with an endothermic peak in the DTA curve. There was a presence of inorganic residue in the ashes. The organic matter present in the USR sample disposed in the landfill is constituted by several polarity, organics compounds from the degradation of lignin, cellulose, lipids, and other materials which thermal stabilities are distinct. The hexane extract features in its constitution two fatty acids, stearic and triacontano´ic, which are nonpolar compounds originating from bacteria present in the residue. The acids groups in extract hexane also were evidenced by X-ray diffraction and FTIR.

Atributos físicos e químicos de substratos compostos por biossólidos e casca de arroz carbonizada

O objetivo deste trabalho foi estudar os atributos físicos e químicos de substratos com diferentes doses de biossólido (BIO) e de casca de arroz carbonizada (CAC), com vistas em obter um meio de crescimento adequado para o desenvolvimento de mudas. Desta forma, utilizando biossólido proveniente da SABESP, estação de Franca (SP), estabeleceu-se um ensaio com os seguintes tratamentos (proporções BIO/CAC): 100/0, 90/10, 80/20, 70/30, 60/40, 50/50, 40/60, 30/70, 20/80, 10/90 e 0/100, os quais foram comparados ao substrato comercial Multiplant®. Foram realizadas análises para determinação dos atributos físicos, como: densidade aparente do substrato, macro e microporosidade, porosidade total, capacidade máxima de retenção de água, e dos atributos químicos dos substratos, como: teores totais de macro e micronutrientes, pH, relação C/N e condutividade elétrica. Com a elevação da dose de BIO no substrato houve aumento da densidade e do percentual de microporos e, conseqüentemente, da capacidade de retenção de água. O BIO apresentou teores razoáveis de nutrientes com destaque para N e P, mas baixos teores de K. Não foram detectados teores de metais pesados superiores aos limites estabelecidos pela Legislação Brasileira no biossólido usado. Comparando-se os valores considerados adequados para o desenvolvimento de mudas encontrados na literatura com os obtidos neste trabalho, encaixaram-se na faixa adequada os substratos cujas doses de biossólido variaram de 30 a 60 %. Nenhum substrato testado, incluindo o do tratamento com substrato comercial, apresentou valores ideais em todas as propriedades estudadas.

Decomposição de resíduos sólidos domiciliares e variações na resistividade e cargabilidade

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Determinação de ácidos carboxílicos em composto de resíduos sólidos urbanos por cromatografia gasosa com detector de ionização em chama

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação de parâmetros indicadores de poluição por efluente líquido de um aterro sanitário

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Implantação de aterros sanitários: Comparação de métodos de seleção de áreas

Historically, the incorrect waste disposal has been related to epidemics which resulted in thousand of deaths. Despite the efforts to develop sanitary disposal methods in the 19 century, even today, uncontrolled dumps are often found in undeveloped countries. These places are responsible for environment pollution and for several diseases. The process of adequate waste disposal begins with the selection of suitable landfill areas, based on environmental characteristics. The goal of this research was to compare two methods of landfill site selection: the first one developed by IG-SMA (1999), and the other by Basílio (2001). Both methods were developed and applied in the same area - region of Campinas, São Paulo State, Brazil and this fact explains the choice for them; the comparison was made by superposing maps. Despite the same geographic area, the result was very different and few areas in common were found; IG-SMA (1999) obtained more suitable areas than Basílio (2001). This has been attributed to scale, criteria and attribute differences and, as a conclusion, Basílio (2001) was considered more restrictive than IG-SMA (1999).

Influencia de la separación de residuos sólidos urbanos para reciclaje en el proceso de incineración con generación de energía

This work analyses the recuperation of the energy of Municipal Solid Waste (MSW) through the incineration process. It considers the up to date tendency of segregation (separation) of plastic, paper and cardboard, glass and metals and their influence in the fluxes of mass and energy in the incineration system of MSW. For its development was used information related to the generation of MSW in Bauru city and the Combust software. The results so obtained allowed the estimation of the Caloric power of the typical MSW and also of this residue when one considers the separations of paper/cardboard and plastic for recycling.

Energia de briquetes produzidos com rejeitos de resíduos sólidos urbanos e madeira de Eucalyptus grandis

The incentive for consumption and production in large quantity in modern society generates enormous amounts of urban solid residues in the form of municipal solid waste (MSW). With the intention of reducing these residues of the municipal waste tips and to generate energy, briquettes with mixtures of MSW and residues of Eucalyptus grandis were produced. The briquettes were manufactured with 0, 5, 10, 15, 20 and 25% of MSW in the mixture with wood waste and 12% of moisture content. The analyzed parameters used to choose the best treatments were combustion analysis versus ash content, mechanical strength and energy content. The briquettes up to 10% of MSW showed low resistance, and above 15% showed large increase in ash content. Therefore, the treatment that fulfilled the requirements for combustion versus ash content and mechanical resistance was of at least 15% of MSW, since the source of the ash is unidentified. Considering the net energy content, the best treatment was 25% of MSW, with 17,175 kJ kg-1. Nevertheless, it is strongly advised that further studies related to gas emissions are necessary.

Monitoramento temporal da pluma de contaminação no aterro de resíduos urbanos de Rio Claro (SP) por meio do método geofísico da eletrorresistividade

Several factors have contributed to the increase the world production of urban solid waste, resulting in difficulties to the correct management and the final environmentally appropriate disposal, in addition to causing serious socio-economic, environmental, and public health troubles. The soil and groundwater contamination by leachate in waste disposal sites is almost always present, leveraging the emergence and/or adaptation of methodologies for environmental assessment of these areas. The geophysical methods, especially the electrical resistivity method, are fast, reliable and low-cost alternative for this purpose. This paper reports the methodology adopted for the temporal monitoring of the plume of contamination of controlled landfill in the municipality of Rio Claro (SP). Electrical resistivity data were obtained in 1999 and 2008, by the resistivity method, using the techniques of vertical electrical sounding and electrical profile. In both years, similar tests were carried out in the same locations within the disposal area. The results indicated that the plume of contamination has resistivity values less than or equal to 50 ohm.m and moves guided by 2 flows: the main, to the southeast, and the secondary, to the west. Relatively to the first series of tests in 1999, the plume of contamination was higher and deeper in 2008, contrary to what was expected for a landfill deactivated for at least 10 years.

Caracterização geofísica em aterro de resíduos sólidos para avaliação de condicionantes de instabilidade geotécnica

The disposal of solid waste can create environmental problems, in addition to the potential risk of instability even in planned geotechnical works, such as provisions in stacks or high ends of the landfill, because they represent mere adjustments in civil engineering works. The Leme city, SP, generates about 35 t/day of municipal waste, that are deposited in a landfill located in the Barro Preto neighborhood. This work conducted a geophysical survey, based on geotechnical instability evidence in area, for analysis of the conditioners that cause on the sides leachate resurgence landfill and its relationship to mass movements and ravines installation in cover soil, with consequent waste exposure. The results indicate horizons of low resistivity connected with resurgence points generated by the organic matter decomposition contained in the waste. Such horizons result in leachate concentration in some places, which, in turn, may lead to loss of cohesion of the materials constituting the residues mass. The results are areas with mass flow by rotational movements, which, together with the surface flow of rainwater, evolves into ravines and exposed residues, preferably at the resurgence point. The leachate flow on the surface affects areas beyond the limits at landfill with direct impact on local agriculture and risk to pedestrians using the highway bordered by the landfill beyond the soil and the local aquifer.

Potencial de geração de energia elétrica a partir de resíduos sólidos urbanos para Bauru e região

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)