Size variation in the grapsid crab Aratus pisonii (H. Milne-Edwards, 1837) among populations of different subtropical mangroves

Size variation in the adult population of the grapsid crab Aratus pisonii (H. Milne-Edwards, 1837) was studied by comparing median values obtained from six different populations from nearby mangrove areas. The mangrove structure at those sites was also examined and related to size differences among populations. Disregarding sex, crab size is apparently related to the mangrove structure. Smallest and largest crab sizes were recorded at the sites where tree density and tree diameter were minimum and maximum, respectively. Estimates of size at the onset of maturity, considering the size of the smallest ovigerous female, followed the same trend. These results support the hypothesis that average crab size and size at the onset of maturity can be associated to mangrove productivity.

Gait training with partial body weight support during overground walking for individuals with chronic stroke: a pilot study

Background: It is not yet established if the use of body weight support (BWS) systems for gait training is effective per se or if it is the combination of BWS and treadmill that improves the locomotion of individuals with gait impairment. This study investigated the effects of gait training on ground level with partial BWS in individuals with stroke during overground walking with no BWS.Methods: Twelve individuals with chronic stroke (53.17 +/- 7.52 years old) participated of a gait training program with BWS during overground walking, and were evaluated before and after the gait training period. In both evaluations, individuals were videotaped walking at a self-selected comfortable speed with no BWS. Measurements were obtained for mean walking speed, step length, stride length and speed, toe-clearance, durations of total double stance and single-limb support, and minimum and maximum foot, shank, thigh, and trunk segmental angles.Results: After gait training, individuals walked faster, with symmetrical steps, longer and faster strides, and increased toe-clearance. Also, they displayed increased rotation of foot, shank, thigh, and trunk segmental angles on both sides of the body. However, the duration of single-limb support remained asymmetrical between each side of the body after gait training.Conclusions: Gait training individuals with chronic stroke with BWS during overground walking improved walking in terms of temporal-spatial parameters and segmental angles. This training strategy might be adopted as a safe, specific and promising strategy for gait rehabilitation after stroke.

Seed germination in Miconia theaezans (Bonpl.) Cogniaux (Melastomataceae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estimativa da irradiação solar global com partição mensal e sazonal para a região de Cascavel - PR

No presente trabalho, mostram-se equações de estimativa da irradiação solar global (R G), por meio do modelo de Angstrom, com partições sazonal e mensal para a região de Cascavel - PR. Os dados experimentais foram cedidos pelo IAPAR, coletados na sua estação meteorológica localizada na COODETEC/Cascavel - PR, no período de 1983 a 1998. Dos 16 anos de dados, 12 anos foram utilizados para cálculo dos coeficientes (a e b) e quatro anos para a validação das equações. Os coeficientes de determinação encontrados foram superiores a 80% para as duas partições. O mínimo da R G é superestimado e o máximo é subestimado quando comparados com o mínimo e o máximo para dados reais, sendo esses encontrados no solstício de inverno e equinócio de primavera, respectivamente. A variação sazonal e mensal do coeficiente a foi menor (0,16 a 0,19 e 0,14 a 0,21) e do coeficiente b maior (0,34 a 0,43 e 0,32 a 0,44). As maiores variações dos erros médios diários ocorreram no equinócio de primavera (-19,45% a 27,28%) e as menores no equinócio de outono (-11,32% a 10,61%). O ajuste mais eficaz das equações foi encontrado para a partição mensal.

Influência das temperaturas mínima e máxima em características de qualidade industrial e em rendimentos de grãos de trigo

Na região tritícola sul-brasileira predominam invernos com temperatura baixa (mínima absoluta, em dias com geada, de até - 8,0ºC). No entanto, a incidência de elevada temperatura (máxima absoluta, em dias isolados entre outubro e novembro, de até 41,0ºC) pode ser encontrada durante todo o período de enchimento de grãos e na maturação fisiológica. Este trabalho teve por objetivos verificar a influência das temperaturas mínima e máxima na qualidade industrial e no rendimento de grãos. Foram usados dados de experimentos com trigo Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) 16, conduzidos nos anos de 1990 a 1998, em sete locais do Rio Grande do Sul e em quatro locais de Santa Catarina. A análise estatística realizada foi correlações múltiplas. Verificou-se que, nos diferentes períodos analisados: a) o aumento da temperatura máxima média resultou em acréscimo do peso de mil grãos, do rendimento de grãos, da força geral de glúten, da microssedimentação com dodecil sulfato de sódio e do número de queda: b) o peso do hectolitro (exceção feita ao período final de maturação fisiológica), o peso de mil grãos, o número de queda e a extração experimental de farinha foram influenciados negativamente pela temperatura mínima média; c) a temperatura mínima média influenciou positivamente a força geral de glúten, a relação P/L e a microssedimentação com dodecil sulfato de sódio.

Metodologia para determinar parâmetros petrofísicos de corte em um campo de petróleo: o caso Socororo, bacia do Oriente, Venezuela

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of the clinical application of the GaAlAs laser in the treatment of dentine hypersensitivity

Objective: the aim of this study was to evaluate the effectiveness of the clinical use of the gallium-aluminum-arsenium (GaAlAs) laser at the maximum and minimum energies recommended by the manufacturer for the treatment of dentine hypersensitivity.Background Data: Dentine hypersensitivity (DH) is a response to a stimulus that would not usually cause pain in a healthy tooth. It is characterized by sharp pain of short duration from the denuded dentin. Its etiology is unknown. The dentin only begins to show sensitivity when exposed to the buccal environment. This exposure can result after removal of the enamel and/or dental cement, or after root denudation. Different treatments are proposed for this disorder.Materials and Methods: In this study, 25 patients, with a total number of 106 cases of DH, were treated with GaAlAs low-level laser therapy (LLLT). 65% of the teeth were premolars; 14% were incisors and molars; 6.6% were canines. The teeth were irradiated with 3 and 5 J/cm(2) for up to six sessions, with an interval of 72 It between each application, and they were evaluated initially, after each application, and at 15 and 60 days follow-up post-treatment.Results: the treatment was effective in 86.53% and 88.88% of the irradiated teeth, respectively, with the minimum and maximum energy recommended by the manufacturer. There was a statistically significant difference between DH and after a follow-up of 60 days for both groups. The difference among the energy maximum and minimum was not significant.Conclusion: the GaAlAs low-level laser was effective in reducing initial DH. A significant difference was found between initial values of hypersensitivity and after 60 days follow-up post-treatment. No significant difference was found between minimum (3 J/cm(2)) and maximum (5 J/cm(2)) applied energy.

Desempenho em pastagens e características de carcaça da 16a progênie dos rebanhos Nelore, Guzerá e Caracu de Sertãozinho (sp)

Forty one young bulls of herds selected for 378 day's weight (W378), born in 1996, were finished on pastures of Panicum Maximum (Jacq.), Panicum Maximum (Jaq) cv. Tanzania 1 and Brachiaria brizantha (Hoschst) Stapf cv. Marandu at the Sertaozinho Experimental Station, São Paulo State, Brazil. The samples, representing the W378 mean for each herd, were composed by 11 Nellore Selection (NeS) and by 10 of each one of the groups Nelore Control (NeC), Guzera Selection (GuS) and Caracu (Ca). The slaughter was carried out when the animals were 824 days older, with a body condition score averaging 7.6, in a 1-9 scale. The minimum and maximum adjusted means for the main traits, including all groups, were: average weight daily gain, 406 (NeC) and 501 g (NeS); slaughter weight (SW), 446.8 (NeC) and 544.3 kg (NeS); carcass weight (CW), 249.8 (NeC) and 309.7 kg (NeS); dressing percentage (DP), 54.0 (GuS) and 56.3% (NeC and NeS). In the 9(th) - 11(th) rib section: muscle, 59.6 (NeC) and 65.2% (Ca); fat, 15.6 (Ca) and 21.4% (NeC); bone, 18.9 (NeC) and 20.2% (GuS); fat thickness (FT), 2.0 (Ca) and 4.2 mm (NeC); loin eye area, 65.6 (NeC) and 71.1 cm(2) (NeS and Ca); Warner-Bratzler shear force (SF), 4.5 (Ca) and 6.6 kg (GuS) and total cooking losses (TCL), 22.5 (NeC) and 24.9% (GuS). The selection for weight promoted higher SW and CW in the NeS group, without changing the DP, the physical composition of the rib, SF and TCL in the meat. However, there was lower FT compared to NeC. The GuS animals had intermediates SW and CW, compared to NeS and Ca and lower DP. The Ca animals presented higher muscle percentage, in the rib section, and also higher meat tenderness compared to the meat of the Zebu animals.

Economic design of (X)over-bar charts with variable parameters: the Markov chain approach

This paper presents an economic design of (X) over bar control charts with variable sample sizes, variable sampling intervals, and variable control limits. The sample size n, the sampling interval h, and the control limit coefficient k vary between minimum and maximum values, tightening or relaxing the control. The control is relaxed when an (X) over bar value falls close to the target and is tightened when an (X) over bar value falls far from the target. A cost model is constructed that involves the cost of false alarms, the cost of finding and eliminating the assignable cause, the cost associated with production in an out-of-control state, and the cost of sampling and testing. The assumption of an exponential distribution to describe the length of time the process remains in control allows the application of the Markov chain approach for developing the cost function. A comprehensive study is performed to examine the economic advantages of varying the (X) over bar chart parameters.

Effect of the Clinical Application of the GaA1As Laser in the Treatment of Dentine Hypersensitivity

Objective: The aim of this study was to evaluate the effectiveness of the clinical use of the gallium-aluminum-arsenium (GaAlAs) laser at the maximum and minimum energies recommended by the manufacturer for the treatment of dentine hypersensitivity. Background Data: Dentine hypersensitivity (DH) is a response to a stimulus that would not usually cause pain in a healthy tooth. It is characterized by sharp pain of short duration from the denuded dentin. Its etiology is unknown. The dentin only begins to show sensitivity when exposed to the buccal environment. This exposure can result after removal of the enamel and/or dental cement, or after root denudation. Different treatments are proposed for this disorder. Materials and Methods: In this study, 25 patients, with a total number of 106 cases of DH, were treated with GaAlAs low-level laser therapy (LLLT). 65% of the teeth were premolars; 14% were incisors and molars; 6.6% were canines. The teeth were irradiated with 3 and 5 J/cm 2 for up to six sessions, with an interval of 72 h between each application, and they were evaluated initially, after each application, and at 15 and 60 days follow-up post-treatment. Results: The treatment was effective in 86.53% and 88.88% of the irradiated teeth, respectively, with the minimum and maximum energy recommended by the manufacturer. There was a statistically significant difference between DH and after a follow-up of 60 days for both groups. The difference among the energy maximum and minimum was not significant. Conclusion: The GaAlAs low-level laser was effective in reducing initial DH. A significant difference was found between initial values of hypersensitivity and after 60 days follow-up post-treatment. No significant difference was found between minimum (3 J/cm 2) and maximum (5 J/cm 2) applied energy.

Morfologia do intestino delgado de capivara - Hydrochoerus hydrochaeris (Linnaeus, 1766)

The high potential for the exploitation of capybara requires information about its digestory morphophysiology, to improve nutritional handling. In the present study, gross anatomy, light microscopy and body and intestine lengths of 25 capybaras were evaluated. The minimum and maximum small intestine lengths for females and males were, respectively, 441 cm and 1734 cm, and 355 cm and 1123 cm. These values position the capybara between canine and swine intestinal lengths. The ratio between small intestine and body length was 12:1, without differences between sexes. There were no statistically significant differences between sexes for each part of small intestine. Correlation between length of each small intestine segment and body length was positive, and statistically significant only for the duodenum. The small intestine wall was formed by mucosa, submucosa, muscular and serosa. The mucosa presented intestinal and duodenal glands, of mucosal and serosal types, respectively. The mucosa muscular layer consisted of two distinct layers in the jejunum and ileum, and a thin and single layer in the duodenum. The submucosa, formed by moderate dense connective tissue, didn't show glands. The fiber bundles of the internal layer of muscular tunic were helicoidally arranged. The gross anatomy of the capybara small intestine was similar to canine and swine intestines. Microscopically, however, subtle differences can be identified in the submucosa and internal muscular tunics.

Photoelastic comparison of single tooth implant-abutment-bone of platform switching vs conventional implant designs

Objectives: The maintenance and stability of peri-implantar soft tissue seem to be related to the crestal bone around the implant platform and different implant designs connections might affect this phenomenon. The aim of this study was to evaluate by photoelastic analysis the stress distribution in the cervical and apical site of implant-abutment interface of conventional implant joints (external hex, internal hex and cone morse) and compare to the novel platform switching design. Materials and methods: It was fabricated photoelastic models using five different implant-abutment connection, one set of external hex (Alvim Ti, Neodent, Curitiba, Brazil), one set of internal hex (Full Osseotite, Biomet 3i, Florida, USA), one cone morse set (Alvim CM, Neodent, Curitiba, Brazil), and two sets of internal hex plus platform switching concept (Alvim II Plus, Neodent, Curitiba, Brazil) (Certain Prevail, Biomet 3i, Florida, USA). These models were submitted to two compressive loads, axial from 20 kgf (load I) and another (load II), inclined 45° from 10 kgf. During the qualitative analysis, digital pictures were taken from a polariscope, for each load situation. For the quantitative analyses in both situations of load, the medium, minimum and maximum in MPa values of shear strain were determined in the cervical and apical site. The Kruskal-Wallis test was used to compare the results between the different systems and between cervical and apical site were compared using Mann-Whitney U test. Results: The results from qualitative analysis showed less concentration of strain in the cervical area to the internal hex plus platform switching (Certain Prevail), in both situation of load. The same results were get in the quantitative analysis, showing less stress concentrations around the implant Certain Prevail with internal hex plus the novel design (17.9 MPa to load I and 29.5 MPa to load II), however, without statistical significant difference between the systems. Conclusion: The minor stress concentration strongly suggest the use of platform switching design as a manner to prevent bone loss around the implant-abutment platform. Clinical Significance: From the result of this study its possible to make clinical decision for implant system which provides implant components with platform switching characteristics.

Gestantes vivendo com HIV/AIDS: Características antropométricas e peso ao nascer dos seus recém-nascidos

PURPOSE: To describe the anthropometric and pregnancy characteristics of women with HIV/AIDS, assisted by the Brazilian National Health System and the birth weight of their newborns. METHODS: The participants were women assisted at public STD/AIDS clinics of the Municipal Health system of São Paulo. The anthropometric characteristics were evaluated by trained nutritionists and other information was obtained from the medical records. For comparison of the survey data to those of the general population, secondary maternal and pregnancy data were obtained from live birth certificates through the Live Birth Information System. Continuous variables were summarized as mean and standard deviation or as the 25th, 50th and 75th percentiles and minimum and maximum values. The other variables are presented as percentages. Means were compared by the Student's t-test or Kruskal-Wallis test depending on the fulfillment of assumptions, with the decision based on the p value. RESULTS: We found the presence of inadequate maternal nutrition according to triceps skinfold (60.9%). The BMI/gestational age showed the presence of underweight (18.5%) and overweight or obesity (40%). There was no association between disease status (HIV or AIDS) and weight, height, and lean or fat mass. Mean newborn birth weight was lower than the value for the general population without infection or disease. The results of this study indicate the need to develop adapted curves to allow a more accurate nutritional assessment of this population group.

Caracterização do aporte de poluentes oriundos da atividade sucroalcooleira para a atmosfera, água, solo e sedimento

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Atitudes sociais de professores da rede de ensino municipal de Guarapuava/PR em relação à educação inclusiva

Pós-graduação em Educação - FFC