Cluster identification and characterization in the riser of a circulating fluidized bed from numerical simulation results

A methodology of identification and characterization of coherent structures mostly known as clusters is applied to hydrodynamic results of numerical simulation generated for the riser of a circulating fluidized bed. The numerical simulation is performed using the MICEFLOW code, which includes the two-fluids IIT's hydrodynamic model B. The methodology for cluster characterization that is used is based in the determination of four characteristics, related to average life time, average volumetric fraction of solid, existing time fraction and frequency of occurrence. The identification of clusters is performed by applying a criterion related to the time average value of the volumetric solid fraction. A qualitative rather than quantitative analysis is performed mainly owing to the unavailability of operational data used in the considered experiments. Concerning qualitative analysis, the simulation results are in good agreement with literature. Some quantitative comparisons between predictions and experiment were also presented to emphasize the capability of the modeling procedure regarding the analysis of macroscopic scale coherent structures. (c) 2007 Elsevier B.V. All rights reserved.

Use of progeny testing in beef cattle: Prediction of genetic gain in a Nelore Cattle Breeding Program

Genetic gains predicted for selection, based on both individual performance and progeny testing, were compared to provide information to be used in implementation of progeny testing for a Nelore cattle breeding program. The prediction of genetic gain based on progeny testing was obtained from a formula, derived from methodology of Young and Weiler (J. Genetics 57: 329-338, 1960) for two-stage selection, which allows prediction of genetic gain per generation when the individuals under test have been pre-selected on the basis of their own performance. The application of this formula also allowed determination of the number of progeny per tested bull needed to maximize genetic gain, when the total number of tested progeny is limited.

Determination of calcium by atomic absorption spectrophotometry applied to the preparation of alginate:chitosan complexes

Polysaccharicles, as alginate and chitosan, have been used to obtain modified release dosage forms. Alginate, due to its property of building gels during the complex formation with calcium ions, allows the building of capsules containing a core constituted by calcium alginate. This work had for objective to determine the appropriate calcium concentration for the preparation of alginate-chitosan capsules, by means of calcium quantification using atomic absorption spectrophotometry. The methodology of calcium quantification was validated through analysis of the limit of detection, precision, accuracy and recovery of the method. The capsules, containing or not the drug, were prepared by the complex coacervation/ionotropic gelification method. Calcium was quantified after samples mineralization and dilution in lantanium solution. The results showed that the amount of calcium incorporated into the capsules depends on the amount of calcium added to the medium, and this ratio increases until the concentration of 1.5% of initial calcium chloride and above this concentration there is a decrease in the proportion of calcium bonded. It was observed that the proportion of calcium that links to the polymer is inversely proportional to the amount of calcium added. The calcium amount incorporated depends on the concentration of the polymeric dispersions used as well as on the ratio between the two polymers.

Planning of secondary distribution circuits through evolutionary algorithms

In this work, the planning of secondary distribution circuits is approached as a mixed integer nonlinear programming problem (MINLP). In order to solve this problem, a dedicated evolutionary algorithm (EA) is proposed. This algorithm uses a codification scheme, genetic operators, and control parameters, projected and managed to consider the specific characteristics of the secondary network planning. The codification scheme maps the possible solutions that satisfy the requirements in order to obtain an effective and low-cost projected system-the conductors' adequate dimensioning, load balancing among phases, and the transformer placed at the center of the secondary system loads. An effective algorithm for three-phase power flow is used as an auxiliary methodology of the EA for the calculation of the fitness function proposed for solutions of each topology. Results for two secondary distribution circuits are presented, whereas one presents radial topology and the other a weakly meshed topology. © 2005 IEEE.

Application of Design of experiments on the simulation of a process in an automotive industry

The objective of this article is to apply the Design of experiments technique along with the Discrete Events Simulation technique in an automotive process. The benefits of the design of experiments in simulation include the possibility to improve the performance in the simulation process, avoiding trial and error to seek solutions. The methodology of the conjoint use of Design of Experiments and Computer Simulation is presented to assess the effects of the variables and its interactions involved in the process. In this paper, the efficacy of the use of process mapping and design of experiments on the phases of conception and analysis are confirmed. © 2007 IEEE.

Improving a process in a brazilian automotive plant applying process mapping, Design of Experiments and Discrete Events Simulation

The objective of this article is to apply the Design of Experiments technique along with the Discrete Events Simulation technique in an automotive process. The benefits of the design of experiments in simulation include the possibility to improve the performance in the simulation process, avoiding trial and error to seek solutions. The methodology of the conjoint use of Design of Experiments and Computer Simulation is presented to assess the effects of the variables and its interactions involved in the process. In this paper, the efficacy of the use of process mapping and design of experiments on the phases of conception and analysis are confirmed.

Recovery of degraded areas using topsoil in the Amazon rainforest

This study is aimed at evaluating the effect of placing the top soil cover areas, such as tailings degraded by tin mining, in the Amazon rainforest in Brazil. The evaluations of the planting sites occurred in areas where tin mining was carried out, basically planting native trees over a period of seven years. This work did not come from a pre-decreed methodology of experimental design, and data was collected only seven years after planting. Thus, it was not possible to identify all variables that contributed to a better recovery of the areas. Sampling was done about seven years after placing the top soil and is determined: pH, organic matter content, P, K, Ca, Mg, Al, cation exchange capacity (T), base saturation (V%), B, Fe, Zn, Cu and Mn. The native forest species existing at the site were evaluated in relation to height (in meters) and diameter of the base. For all sites where the surface layer of soil was applied, there were significant differences in the growth of native species. A fundamental aspect in the rehabilitation of areas degraded by mining, in general, is the knowledge about the soil where that recovery must be conducted. The specific procedures in the rehabilitation of those areas depend essentially on the physical, chemical, biological and mineralogical properties of the soil, which must present conditions for the adequate development of the plants. The initial idea of implanting a project of recovery of soils degraded by mining in the Amazon Forest emerged from a first visit to the field, carried out in 1998. The conditions of the already mined areas, in comparison to the exuberant forest of the surroundings caught our attention. The mining company that acts in the area had already been trying for some time to implant a plan of recovery of these mining areas, however without reaching any significant positive results. The loss of organic matter is one of the main problems of degraded areas in Brazil. The storage and reuse of a blanket of soil (topsoil) produce excellent results, but most of the miners consider this technique expensive and difficult because of operational costs and the sharp topographical condition of the mine site. Therefore, a research project was elaborated prioritizing the recovery of the soil degraded by the tin mining as a prior step to the recovery activities with native forest species. The formation of a superficial pseudo-horizon that supported the vegetation and the time that it would take for its establishment became the main objective of this research. The objective of this work is to verify the levels of elements and their traces in areas where top soils were applied for the remediation of degraded areas with local re-vegetation. © 2011 WIT Press.

Ethanol production by Zymomonas mobilis during sucrose fermentation: Optimization of culture conditions using factorial design

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Brazilian portuguese wordNet: a computational linguistic exercise of encoding bilingual relational lexicons

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influence of seasonality and production method on the antibacterial activity of propolis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A matheuristic for the selection of beam directions and dose distribution in radiotherapy planning

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise das matrizes curriculares dos cursos de Comunicação Social com habilitação em Jornalismo no Brasil: um retrato da realidade nacional

O artigo em questão é fruto de pesquisa sobre a educação jornalística e teve como objeto as matrizes curriculares de todos os cursos de Comunicação Social com habilitação em jornalismo do Brasil. O objetivo foi o de fazer um diagnóstico das estruturas curriculares do referido curso em todas as regiões do país e depois consolidar um desenho da estrutura nacional. Utilizamos como metodologia a pesquisa quantitativa e qualitativa. Nossas principais constatações foram em primeiro lugar a de que o espaço destinado aos conteúdos de Síntese/Comunicação na estrutura curricular de todas as regiões é mínimo, o que dificulta a inter-relação entre a teoria e a prática. em segundo lugar pudemos verificar que, apesar das premissas previstas nas DCN para o curso de Comunicação Social, as realidades regionais não estão contempladas nas matrizes curriculares dos cursos.

Extração e pré-tratamento químico de frutanos de Yacon, Polymnia sonchifolia

O processo de desintegração de tubérculos de yacon promove a incorporação de oxigênio que favorece a oxidação de compostos fenólicos e decorrente contaminação do extrato aquoso com cores e odores objetáveis que prejudicam a sua utilização. Este estudo buscou verificar uma metodologia simplificada de extração dos carboidratos presentes nos tubérculos de yacon e efetuar uma primeira remoção de resíduos e compostos originários das cores e odores indesejáveis, utilizando processos de coagulação e precipitação, aplicando tecnologias de baixo custo. Após a etapa de trituração e remoção dos restos celulares, o extrato teve seu pH aumentado para 9,5 e a temperatura para 90ºC, seguido de sedimentação. A remoção deste precipitado foi realizada por filtração em papel após a coagulação com diferentes concentrações de sulfato de alumínio comercial. Verificou-se que a melhor concentração de coagulante no extrato foi de 100ppm, removendo 90,6% dos compostos coloridos. O balanço de massa mostrou uma recuperação de 47,5% dos sólidos totais sendo que 35,6% estão na forma de carboidratos, verificado através da concentrção de carbono orgânico. O processo de pré-tratamento químico causou hidrólise nos oligofrutanos, detectado por um aumento na concentração de açúcares redutores totais, diretamente proporcional à concentração de sulfato de alumínio utilizado no tratamento de coagulação. Análises cromatográficas indicaram o perfil dos açúcares no hidrolisado e a extensão desta hidrólise que foi considerada pequena. A metodologia aplicada mostrou-se fácil, de baixo custo, eficiente e aplicável em agroindústrias nas zonas produtoras desta espécie de raiz tropical.

Prováveis consequências do abrandamento da metodologia de erradicação do cancro cítrico no Estado de São Paulo

Recentemente a Secretaria de Agricultura e Abastecimento do estado de São Paulo abrandou os critérios relacionados à erradicação do cancro cítrico. em abril de 2009 mais de 99,8% dos talhões comerciais de laranjeiras doces estavam livres da doença em São Paulo. Abrandar a metodologia de erradicação significa comprometer esse elevado nível de sanidade dos pomares e a competitividade da citricultura, com reflexos negativos financeiros e ambientais. Diante desses fatos sugere-se: a) que a erradicação da doença volte a ser feita como anteriormente utilizada; ou b) a adoção de uma nova metodologia de erradicação, mais efetiva na supressão da doença, quando em novos levantamentos amostrais de cancro cítrico em São Paulo forem encontradas incidências de talhões comerciais com a doença superiores a 0,36%. Essa incidência foi calculada comparando-se pelo teste de Duncan (P<0,05) os levantamentos amostrais de cancro cítrico realizados de 1999 a 2009. A diferença mínima significativa encontrada foi de 0,28. A menor incidência do cancro cítrico em São Paulo foi de 0,08%, observada em 2001. Dessa forma, como alternativa, propõe-se a adoção de uma metodologia mais drástica de erradicação do cancro cítrico quando em um novo levantamento amostral for detectado mais que 0,36% de talhões comerciais com cancro cítrico.

Custo de produção e rentabilidade das culturas de alface, rabanete, rúcula e repolho em cultivo solteiro e consorciadas com pimentão

Realizou-se, o trabalho na UNESP, Jaboticabal, SP, com o objetivo de avaliar a rentabilidade das culturas de alface, rabanete, rúcula e repolho, em cultivo solteiro e consorciadas com pimentão. A determinação dos custos de produção das culturas em cultivo solteiro e em consórcio foi realizada com base na metodologia do custo operacional total (COT), com valores referentes a março de 2005. Para o cálculo da receita bruta, considerou-se o preço do setor atacadista, CEAGESP, no mês de março de 2005. Os COT das culturas de repolho, rúcula, alface e rabanete, quando consorciadas com pimentão, tiveram redução de 34,0%, 24,7%, 21,3% e 20,8% em relação aos seus respectivos cultivos solteiros. As culturas de alface e rabanete consorciadas com pimentão apresentaram aumento na receita líquida em 49,6% e 13,9%, respectivamente, quando comparadas com seus cultivos solteiros. A maior rentabilidade foi obtida em consórcio de pimentão com alface. A taxa de retorno e índice de lucratividade dos consórcios foram superiores aos observados nas monoculturas.